Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - opns_neuling

#31
Hi!
Ich versuche den DHCP im Sense als Ersatz von meinen Stand-Alone DHCP.
Wie kann ich mehrere Subnetzte definieren für die gleiche VLAN bzw. Interface ?

Wie ich es verstanden habe bisher: Der DHCP-Server in OpnSense kann nur Pools für Subnetze erstellen, mit denen er direkt verbunden ist. Daher kann ich keine zusätzlichen Pools erstellen, um Remote-Subnetze zu bedienen, die DHCP-Anforderungen über z.B. einen  Cisco / HP Helper weiterleiten.

Hintergrund:
Zum Beispiel an mein OPT5 habe ich folgende Netze.
192.168.1.0/22   (    IP: 192.168.1.1 OPT1)
192.168.10.0/24 (Alias: 192.168.10.1 auf OPT1)
192.168.20.0/24 (Alias: 192.168.20.1 auf OPT1)

Wie lege ich für die 92.168.10.0/24 und 192.168.20.0/24 Pool bzw. reserviere ich die IP's dafür ?
#32
Hi!
After update to 21.1.3, all titles on Dash board are ...
"system_information_title"
"services_status_title"
"openvpn_title"

and on click,


Page not found

Go back to previous page

Any hints ?
Thanks a lot



#33
Hi!
I have a case here with 2 opnsense (cascaded connected).
One of them has public IP and the second is supposed to be attached to the DMZ.
Letsencrypt is up and running on the first opensense.
I would like to sync the certs with renewals to the second opensense, and start the GUI again (so the letsencrypt certs are used for the GUI in the second router) .... is that possible?
Thanks a lot
#34
Hi @all !

Log on update ...


...
[48/52] Extracting redis-5.0.9: ......... done
You may need to manually remove /usr/local/etc/redis.conf if it is no longer needed.
[49/52] Upgrading os-frr from 1.17 to 1.19...
[49/52] Extracting os-frr-1.19: .......... done
Stopping configd...done
Starting configd.
Migrated OPNsense\Quagga\General from 1.0.1 to 1.0.2

Notice: Undefined variable: field_rfcls in /usr/local/opnsense/mvc/app/models/OPNsense/Base/BaseModel.php on line 150

Notice: Trying to get property 'name' of non-object in /usr/local/opnsense/mvc/app/models/OPNsense/Base/BaseModel.php on line 150

Fatal error: Uncaught OPNsense\Base\ModelException: class  of wrong type in model definition in /usr/local/opnsense/mvc/app/models/OPNsense/Base/BaseModel.php:150
Stack trace:
#0 /usr/local/opnsense/mvc/app/models/OPNsense/Base/BaseModel.php(196): OPNsense\Base\BaseModel->getNewField('OPNsense\\Base\\F...')
#1 /usr/local/opnsense/mvc/app/models/OPNsense/Base/BaseModel.php(252): OPNsense\Base\BaseModel->parseXml(Object(SimpleXMLElement), Object(SimpleXMLElement), Object(OPNsense\Base\FieldTypes\ContainerField))
#2 /usr/local/opnsense/mvc/app/models/OPNsense/Base/BaseModel.php(272): OPNsense\Base\BaseModel->parseXml(Object(SimpleXMLElement), Object(SimpleXMLElement), Object(OPNsense\Base\FieldTypes\ContainerField))
#3 /usr/local/opnsense/mvc/app/models/OPNsense/Base/BaseModel.php(328): OPNsense\Base\BaseModel->parseXml(Object(SimpleXMLElement), Object(SimpleXMLElement), Object(OPNsense\Base\FieldTypes\ContainerField))
#4 [internal function]: OPNsense\Base\BaseModel->__construct()
#5 /usr/local/opnsense/mvc/script/run_migrat in /usr/local/opnsense/mvc/app/models/OPNsense/Base/BaseModel.php on line 150
Reloading plugin configuration
Configuring system logging...done.
Reloading template OPNsense/Quagga: OK
Reloading template OPNsense/Syslog: OK
[50/52] Upgrading opnsense from 20.7.4 to 20.7.6...
[50/52] Extracting opnsense-20.7.6: .......... done
Stopping configd...done
Resetting root shell
...


Everything seem to be working fine, any thing i should worry about?  beyond submitting a report from the ui, do i need to provide more information?

Thank a lot.

#35
German - Deutsch / Re: haproxy path rewrite
December 05, 2020, 11:39:53 PM
Die Herausforderung habe ich soeben auch :-)
#36
Welche screenschots  möchtest du gern ?
#37
Hello @community,

Issues with os-ftp-proxy plugin

At Opnsense HA with 2 WAN Interfaces.
Haproxy Working, no problems.

Connect to FTP
on WAN1: connect, login and file transfer posible
on WAN2: connect and login works, but   file transfer not posible
Any Hints ?
Thanks a lot

PS: configured as in the guide https://forum.opnsense.org/index.php?topic=3868.0



#38
Guten Morgen !
Das hier war das Problem !!!

Zitat auf die Dokumentation:
For multiwan setups be careful with groups, since groups are not bound to a specific interface, they will use the normal routing system to determine the next hop when applied on WAN type interfaces (reply-to is not used here).


Die Firewall Rules aus die WANGRUPPE pro WAN Interface im Firewall kopiert und siehe da, es läuft :-)
#39
richtig !
Ping von aussen läuft's einwandfrei bei beiden WAN's:-)
#40
Hi!
Anfragen über WAN2 werden über WAN1 geantwortet und NICHT über WAN2 (bestätigt mit Packet Capture) !!!
#41
Hi !
Bei beide WAN's (WAN1 und WAN2) sind als Gateway (ganz unten) die entsprechenden Gateways eingetragen.
Grüße
#42
Es klingt nach eine Erklärung / Lösung ... ich finde es gerade aber noch nicht ...
Also ich warte auf ein Stichwort  :)
#43
Hallo @community,
Ich sehe den Wald vor lauter Bäumen nicht!

opnsense HA mit 2 WAN Interfaces
Haproxy mit https proxing zu Web Servers im DMZ Bereich.
Alles soweit OK.

Das Problem:
WAN1 anpingbar (von aussen) und "https://xxx"  ist erreichbar
WAN2 anpingbar (von aussen) und "https://xxx"  ist NICHT erreichbar

Anfragen über WAN2 werden über WAN1 geantwortet und NICHT über WAN2 (bestätigt mit Packet Capture) !!!
WAN1 z.Z. Default Gateway (active)


Hinweis:
1) ein netstat -ln bestätigt das den port 443 auf beide WAN Schnittstellen läuft's
2) firewall logs zeigen dass die ports nicht blockiert sind und Daten/Anfragen ankommen.
3) Bei beide WAN's (WAN1 und WAN2) sind als Gateway (ganz unten) die entsprechenden Gateways eingetragen.
4) Unter Firewall ‣ Settings ‣ Advanced: Sticky Connections ist gesetzt.
5) Unter Firewall ‣ Settings ‣ Advanced: Disable force gateway ist gesetzt.
6) Beide Gateway zu jeder WAN haben die Option "Upstream" aktiviert.


Tips ? Hint's ?
Vielen Dank im Voraus ...



#44
20.7 Legacy Series / Problem with dhcrelay
November 06, 2020, 11:34:25 AM
Hi @all!


On:  Services: DHCPv4: Relay
At moment, are 2 interfaces selected (vlan116 and vlan33)
my dhcp server (172.30.99.100) is running on vlan99

but ps -awux shows ...

/usr/local/sbin/dhcrelay -i lagg0_vlan116 -i lagg0_vlan33 -i lagg0_vlan99 172.30.99.100

why the extra "-i vlan99" ?  dhcrelay should not listen on vlan99!
I think, for the same reason, multiple dhcprequests appear on the dhcp server.

Thanks a lot.





#45
leider noch nicht ... ich habe die "rules" jetzt unter config.xml gelöscht. aber nicht ganz onhe risiko :-(