Topics

After the update to 23.7.6 I have a strange problem with drop down menus when using the Ipad to browse the web UI. I can click correctly the menu, the menu open up and the everything else scrolls down and when I click one of the menu voices the menu close and everything else goes up to the correct position. This behaviour occurs for every drop down menu and with every browser (chrome, safari, edge).

After 22.1 update I have a problem with a WiFi interface that I use as a WAN backup. It cannot connect and obtain the IP via dhcp if the SSID is hidden. I used to have the SID hidden for a long time without a problem. Is there something I'm missing?

I recently configured and openvpn server on my Opnsense. Everything works good but it seems that everytime a client connects to my ovpn server my insight datas are messed up. The graphs and datas from 24 hour average are not visible anymore and somethimes the other graphs puts ovpn nic datas in WAN datas so datas are completely wrong. Is there a way to filter out the ovpn connection completely from flowd?

Riccardo

After update to 21.1.7 the reverse lookup on my opnsense box is not working anymore (I'm using unbound on the box). I didn't changed anything. Any suggestion on what can I check?

Riccardo

I used an USB WLAN nic without problems for months. Today I had to delete the assignments for this to do some cleanup after I subscribed for a new FTTH connection. After this the device is not visible anymore in Interfaces: Wireless: Devices. The device is  still correctly discovered by the system as run0 but it seems that the run0_wlan device is not created anymore. I tried to reboot several times without success. Any help?

Riccardo

Starting from 20.1.4 I have a problem with eastpect that crashes and destroy my LAN NIC. After some minutes it restarts and work for sometime. The problem happens every now and then and I cannot see any relation with other components.

This is the log file:

May  7 11:48:57 OPNsense kernel: pid 33892 (eastpect), uid 0: exited on signal 11
May  7 11:48:57 OPNsense kernel: 937.846498 [ 293] generic_netmap_unregister Emulated adapter for re0 deactivated
May  7 11:48:57 OPNsense kernel: 937.847457 [1033] generic_netmap_dtor       Emulated netmap adapter for re0 destroyed
May  7 11:49:12 OPNsense eastpect[23514]: nm0::re0: permanently promiscuous mode enabled
May  7 11:49:12 OPNsense kernel: 952.519254 [1127] generic_netmap_attach     Emulated adapter for re0 created (prev was 0)
May  7 11:49:12 OPNsense kernel: 952.519307 [1033] generic_netmap_dtor       Emulated netmap adapter for re0 destroyed
May  7 11:49:12 OPNsense kernel: 952.544306 [1127] generic_netmap_attach     Emulated adapter for re0 created (prev was 0)
May  7 11:49:12 OPNsense kernel: 952.544634 [ 318] generic_netmap_register   Emulated adapter for re0 activated
May  7 11:49:12 OPNsense eastpect[23514]: nm1::re0^: permanently promiscuous mode enabled
May  7 11:51:12 OPNsense kernel: pid 23514 (eastpect), uid 0: exited on signal 11
May  7 11:51:12 OPNsense kernel: [HBSD SEGVGUARD] [eastpect (23514)] Suspension expired.
May  7 11:51:12 OPNsense kernel: -> pid: 23514 ppid: 60854 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT>
May  7 11:51:12 OPNsense kernel: 072.172948 [ 293] generic_netmap_unregister Emulated adapter for re0 deactivated
May  7 11:51:12 OPNsense kernel: 072.174418 [1033] generic_netmap_dtor       Emulated netmap adapter for re0 destroyed
May  7 11:51:26 OPNsense eastpect[15502]: nm0::re0: permanently promiscuous mode enabled
May  7 11:51:26 OPNsense kernel: 086.361862 [1127] generic_netmap_attach     Emulated adapter for re0 created (prev was 0)
May  7 11:51:26 OPNsense kernel: 086.361912 [1033] generic_netmap_dtor       Emulated netmap adapter for re0 destroyed
May  7 11:51:26 OPNsense kernel: 086.379070 [1127] generic_netmap_attach     Emulated adapter for re0 created (prev was 0)
May  7 11:51:26 OPNsense kernel: 086.379521 [ 318] generic_netmap_register   Emulated adapter for re0 activated
May  7 11:51:26 OPNsense eastpect[15502]: nm1::re0^: permanently promiscuous mode enabled

I have this problem since updated to 20.1. Everytime I restart the provider's router or disconnect the ethernet cable from the wan port of the opnsense box the system crashes and reboots. I tried to set 'prevent interface removal' without any success. Any suggestion?

Riccardo

I recently upgraded my system to 20.1 and everything went well for a while. But after a reboot my USB 4G dongle didn't come up correctly and I had to remove and recreate it. After this I noticed that Inside datas are switched between WAN1 (my nic with PPPoE) and WAN2 (the USB dongle). Under traffic everything goes as it should with connections showed correctly on WAN1 but under Insight datas are wrong. I tried to restart the box with WAN1 only and datas are displayed correctly but after I add WAN2 interface everything goes back to the wrong situation.

Riccardo

After the upgrade to 19.7 I have the following problem: when i start an update or install or remove a plugin everything goes well until configd is stopped. Then it never restarts. I cannot see the logs and, in case of updates, I don't konw if everything is installed correctly or not. Any suggestion?