Messages

106

21.1 Legacy Series / Re: Firewall Log Widget not working...bug? (21.1.7_1)

« on: June 26, 2021, 03:51:20 pm »

Is the widget losing the interface selection?  When was troubleshooting this yesterday, all interfaces were selected, in testing, I deselected all, unchecked/rechecked filters and saved, then un-did those changes so everything was again selected without success.  This morning only the WAN interface was selected (the logging records in my case are geoip related outbound from lan/vlan).

One change I did make was updated ntopNG...and I hadn't been running that until recently.  I don't know why that would be related (doubt it is), but aside from that and 21.1.7 update, I haven't changed anything. 

107

21.1 Legacy Series / Re: Firewall Log Widget not working...bug? (21.1.7_1)

« on: June 26, 2021, 03:09:16 pm »

Was just answering these questions, with screenshots and such.  Noticed that for some reason the interfaces selected was now limited to WAN only (yesterday I absolutely for sure selected all three of my interfaces (wan/lan/vlan10)).  Selecting the other interfaces now populates properly.  Honest...I was very careful to verify this wasn't a user error...but I guess until more evidence, it is.  :/

Thanks!

108

21.1 Legacy Series / [SOLVED] Firewall Log Widget not working...bug? (21.1.7_1)

« on: June 26, 2021, 01:02:33 am »

Is anyone having issues with the firewall log widget no longer populating?  Mine is blank, has been since upgrading.  Checked settings for it (i.e., interfaces, filters), changed themes, verified there are log records to display, ran health audit, but nothing.  In the webgui log I can see the data is being requested, "configd.py[57004]   [cbdb2625-352b-4fce-a587-1ed355d12979] request filter log output".

Anything else to check?  Thx!

109

21.1 Legacy Series / Re: 21.1.7: Updates tab is hanging

« on: June 17, 2021, 02:21:02 pm »

Just to confirm, my update output hung also, but at a different point.  The last line in mine was "[34/35] Extracting opnsense-21.1.7: ........", then nothing.  I opened a ping window on my desktop and saw pings eventually failed to opnsense (rebooting) and then they returned.  I had to refresh the browser to get back to the login screen.

110

21.1 Legacy Series / Re: chrony stopped WebUI

« on: June 16, 2021, 12:46:10 am »

You disabled NTP?  As I remember when I removed the interfaces (Services | Network Time) it was servicing I also had to stop the service from the dashboard page.

111

21.1 Legacy Series / Re: chrony stopped WebUI

« on: June 12, 2021, 10:31:56 pm »

Since you went through this testing, I would c/p it to github as a bug...just follow the template and hopefully it will get some attention.

https://github.com/opnsense/plugins/issues

112

21.1 Legacy Series / Re: chrony stopped WebUI

« on: June 12, 2021, 05:07:48 pm »

Retested and still cannot reproduce.  Do you have any strange add-ons in the browser?  Maybe try chrome (or other) or use a mobile device to verify it's opnsense.  Not sure if there would be anything in the logs...in case you hadn't checked.

113

21.1 Legacy Series / Re: chrony stopped WebUI

« on: June 10, 2021, 08:07:57 pm »

Just tested and cannot recreate per your setup (firefox, 1.3, 21.1.6).  I don't use dyndns.  Also, when I enabled chrony, I made sure to disable the default ntp service by removing the interfaces.  I also changed the port for chrony to 123.  And now using NTS cloudflare...but I doubt that matters.  I can click through all the tabs and continue on without issue.

114

21.1 Legacy Series / Re: how to limit stepson's usage of internet? new to opsense.

« on: June 08, 2021, 12:46:37 am »

Don't current iOS mobile devices randomize MAC addresses to prevent tracking?  It can be disabled by the user for home networks, but then can also be re-enabled by the user.  No idea about android...guessing same.

115

General Discussion / Re: Name resolution and how to find the source destination traffic

« on: June 01, 2021, 06:21:07 pm »

ntopng is probably what you're looking for then.  You'll need to install that as an add-on.

Product info:
https://www.ntop.org/products/traffic-analysis/ntop/

To install:
https://www.ntop.org/guides/ntopng/third_party_integrations/opnsense.html

Discussion:
https://forum.opnsense.org/index.php?topic=20812.0#msg105371

Edit: added additional link to install and some relevant discussion.

116

General Discussion / Re: Name resolution and how to find the source destination traffic

« on: June 01, 2021, 05:08:23 pm »

Welcome. 

Regarding 2, you can look at Insight under reporting...that can be useful for what it sounds like you're asking about.  Also, for real time you can look under firewall | diagnostics | pftop.  Really depends what you need/want.

Regarding 1, not sure what you're after...what names do you want resolved?  Firewall rule names?  That's a limitation in FreeBSD (as I understand it).  You can look in the Live Log and see it there.  If you're talking about IP addresses being resolved...do you mean DNS?  Local or remote addresses?

117

21.1 Legacy Series / Re: 21.1.6 broke Firewall Live Log Filter?

« on: June 01, 2021, 03:14:43 pm »

Agreed, looks good...not seeing any controls overlapping on resize.

118

21.1 Legacy Series / Re: 21.1.6 broke Firewall Live Log Filter?

« on: May 31, 2021, 06:50:32 pm »

Works fine on both computer (2560x1440) and iPad, also get a scroll bar when I size my browser window very small/narrow.  What resolution are you running @Greelan?

119

21.1 Legacy Series / Re: 21.1.6 broke Firewall Live Log Filter?

« on: May 30, 2021, 10:59:29 pm »

Mine does that too WHEN I size my browser window so small those buttons overlap.  I'm sure it wasn't tested on a monitor of that size/resolution...or maybe you have a larger text size by default.

120

21.1 Legacy Series / Re: 21.1.6 broke Firewall Live Log Filter?

« on: May 29, 2021, 04:30:33 pm »

It seems to work fine here using chrome (current release)...I was able to add filters, save a profile, remove a profile, clear filters.