Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - lukepower

Pages: [1] 2

18.1 Legacy Series / OpenVPN Roadwarrior resolvable common name

« on: February 20, 2018, 08:52:12 am »

Hi there,
I am successfully running an OpenVPN roadwarrior setup with multiple machines connecting to OpnSense without issues. Now I would make it possible to access those machines via DNS names instead of IP only (so, instead of using 10.10.0.5, I'd like to be able to use something like 'roadwarrior01'). Is there any straightforward way to register the common name of the roadwarrior in the DNS forwarder, like the DHCP leases are being registered?

Thanks
Lukas

16.7 Legacy Series / Re: Gateway stopped working after upgrade to 16.7

« on: August 01, 2016, 12:08:32 pm »

Hi Ad,

it seems to work now well. Maybe it was really only a matter of rebooting the system.
Thanks

16.7 Legacy Series / Re: Gateway stopped working after upgrade to 16.7

« on: July 31, 2016, 12:08:40 pm »

Hi Ad,
actually I had to try several things to get it back working. Seems that I had to both reboot the DSL router as well as OPNsense. It worked flawlessy for about 24 hours and now it's down again. The funny thing is that OPNsense detects a "link down" situation even if it is working. Only a reboot of the upstream router helps here.

16.7 Legacy Series / [SOLVED] Gateway stopped working after upgrade to 16.7

« on: July 30, 2016, 09:49:31 am »

Hi Guys,
I did the upgrade to 16.7 yesterday and it all went smoothly - apparently, at least.
I found out that a part of our network lost internet access since the upgrade, and exactly this part (the Guest WLAN) is using a different interface to access the internet. Basically, I am using an PPPoE connection as the main WAN connection, and a router (located at 192.168.0.6) as a second connection for the Guest WLAN.

I did several tests, and it seems that OPNsense is unable to use that router to access the internet. I currently have it configured as a gateway and didn't change anything, so I am unsure about what might be wrong. Any hints?

Thanks
Lukas

16.1 Legacy Series / Re: Captive Portal: MAC addresses not saved

« on: April 14, 2016, 11:05:44 am »

Ok found out the problem.
Basically I copy/pasted the MAC address with a space at the end, which obviously was interpreted as a non-MAC character. Probabily it would be nice to get it trimmed before testing, but hey, my fault

Thanks again
Lukas

16.1 Legacy Series / Re: Captive Portal: MAC addresses not saved

« on: April 14, 2016, 10:35:00 am »

Oh god, right, now it works

But when entering more than one address, I get the error "Please enter valid mac addresses". (see screenshot)

So one address works fine, when I try to add a second it doesn't ...

16.1 Legacy Series / [Solved] Captive Portal: MAC addresses not saved

« on: April 13, 2016, 07:25:09 pm »

Hi there,

while experimenting with the captive portal, I noticed that I am unable to set any MAC address (like "b0:df:3a:0b:e6:be") under "Allowed MAC addresses".
I can edit the field, but once I hit "Save" it is not saved (and of course not applied). Am I doing something wrong here?

OPNsense 16.1.9-amd64
FreeBSD 10.2-RELEASE-p14
OpenSSL 1.0.2g 1 Mar 2016

Thanks
Lukas

16.1 Legacy Series / Re: Captive Portal not working

« on: April 11, 2016, 10:51:32 am »

Hi Ad,

I think that the solution with the checkbox would be more than fine. I would use the captive portal for hotel guests, and a too complicated username (for the password it's not as bad I guess) could lead to complaints

Anyway, OPNsense is truly great and I am very happy that I went installing it right away once it came out, instead of using pfSense. I used to use Endian firewall, but that stuff was simply not working anymore for my needs...

16.1 Legacy Series / Re: Captive Portal not working

« on: April 11, 2016, 09:59:46 am »

Ok!
But now tell me, what was wrong? Did I set something odd?

16.1 Legacy Series / Re: Captive Portal not working

« on: April 11, 2016, 09:47:48 am »

Sir, it is working now!

What did you do to get it working?

Btw, is there any way to change the complexity of the vouchers? Like, avoid special chars in the username?

Pages: [1] 2