Messages

Only if you add a third box doing the PPPoE termination. Otherwise the PPPoE connection needs to bounce between the two HA boxes in active/passive fashion.


Cheers,
Franco

Hi ,
Would a third Opnsense device as PPPoE termination a recommended option for this scenario?
Regards 

Hi,
to forward multicast traffic between  WAN and LAN interfaces, you will need to install and configure the igmp-proxy plug-in as well as the firewall rules on these interfaces.

This link might help:

https://docs.opnsense.org/manual/how-tos/dt_ger_iptv.html

Regards

To streaming service on the  TV is some sort of app from your service provider or a standard OTT app such as Netflix, Youtube, etc?

Should the service stream using multicast traffic, IGMP proxy needs to be taken into consideration.

Hope this helps

Hi there,

Is the video stream to the TV unicast or multicast traffic?

Rgds

Found it,

from logs " 6 clients unacked so far, 0 clients left before transitioning to the partner-down state"

Thanks again for sharing.

Thanks for sharing.

We am facing some difficulties in getting the backup server to start responding to dhcp clients on a test environment with just 5 clients. Sync running as expected.

Any tip would be appreciated.

Hi,

Just to confirm Kea does support the scenario.

Thanks for the info.

Have you tried to log through the console from the SSH connection?

Hi,
Anyone managed to replace a Multi-scope Windows DHCP server with the freeradius dhcp service?
Thanks

Regards

Hi
Running  Opnsense on similar hardware J1900/4xi211 with no issue.
Looks to me as a hardware problem on that unit.
Hope this helps 

Hallo,
das Problem liegt,  wahrscheinlich, an der firewall Einstellung.

G.

Hallo,
mit den richtige  Einstellung wird "Wan failover" einwandfrei laufen.

G.

If I get it right, your goal is to set both devices in HA mode.
Should this be the case you are missing some of the configuration, take a look into https://docs.opnsense.org/manual/hacarp.html.

Regards

Hi,
I would suggest to configure, should it be possible, lagg interfaces on both  opnsense. Configure LACP on the MCLAG with two ports on different members.

Hope this helps