1591
17.7 Legacy Series / Re: IPv6 Addresses Not Being Handed Out on LAN
« on: January 26, 2018, 09:05:47 pm »
You can't when you are using wan tracking, it's all automatic. 
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
1592
17.7 Legacy Series / Re: IPv6 Addresses Not Being Handed Out on LAN
« on: January 26, 2018, 08:31:39 pm »
Ok, so my test setup that I am using is this.
APU ( 17.7.12 ) -> ( Main Router ) -> WAN.
The main router IS opnsense 18.1.rc2, but all its addresses are statics as I have a good ISP.
the ONLY thing I needed to do on that router was change my LAN NET rule to LAN any, thus allowing the delegated prefix range through, and all is working nicely.
What can I tell you, if your IPv6 address and range are sticky, i.e. they don't change every time you drop the WAN connection you could try setting up your LAN with statics, that does not answer the question as to why mine works 'out of the box' and yours does not though. Something has been altered but I cannot tell you what.
I would suggest a clean install and do nothing except a default install and take it from there, checking your iPv6 constantly to see what breaks it.
Sorry I cannot be of more use..
APU ( 17.7.12 ) -> ( Main Router ) -> WAN.
The main router IS opnsense 18.1.rc2, but all its addresses are statics as I have a good ISP.
the ONLY thing I needed to do on that router was change my LAN NET rule to LAN any, thus allowing the delegated prefix range through, and all is working nicely.
What can I tell you, if your IPv6 address and range are sticky, i.e. they don't change every time you drop the WAN connection you could try setting up your LAN with statics, that does not answer the question as to why mine works 'out of the box' and yours does not though. Something has been altered but I cannot tell you what.
I would suggest a clean install and do nothing except a default install and take it from there, checking your iPv6 constantly to see what breaks it.
Sorry I cannot be of more use..
1593
17.7 Legacy Series / Re: IPv6 Addresses Not Being Handed Out on LAN
« on: January 26, 2018, 07:45:12 pm »
OK, virgin install of Opnsense 17.7.5 on an APU2, bounced through upgrades using the shell to 17.7.12 gives me an IPv6 address on my test LAN of my PC in the correct prefix range.
No changes to firewall rules, just a virgin install. So in FW rules LAN I have a default v4 and v6 LAN net to any rules and that's it.
No changes to firewall rules, just a virgin install. So in FW rules LAN I have a default v4 and v6 LAN net to any rules and that's it.
1594
17.7 Legacy Series / Re: IPv6 Addresses Not Being Handed Out on LAN
« on: January 26, 2018, 07:24:50 pm »
My main unit and test units are running 18.1rc2 so I am running up a 17.7.12 version to check. I know it was working when I first tried 17.7.11, then again all my addresses are static. I'll get back to you shortly.
1595
17.7 Legacy Series / Re: IPv6 Addresses Not Being Handed Out on LAN
« on: January 26, 2018, 06:29:17 pm »
As bart said..
1596
17.7 Legacy Series / Re: IPv6 Addresses Not Being Handed Out on LAN
« on: January 26, 2018, 06:05:52 pm »
What it means is that it's automatic. Go to the shell and issue the ifconfig command and what IPv6 addresses are showing on the LAN interface?
1597
Development and Code Review / Re: dark theme first look
« on: January 23, 2018, 09:54:08 pm »
Blue is cool.🐦
1598
Development and Code Review / Re: dark theme first look
« on: January 23, 2018, 09:30:26 am »It looks awesome! I like it a lot!
Thanks... appreciated.
1599
Development and Code Review / Re: dark theme first look
« on: January 23, 2018, 09:29:53 am »
I have, but that has not made it through yet.
You are correct in that there is an issue with some of the CSS files in that they live outside of the themes folder. The PR I have issued in core resolves that and so both rebellion and opnsense themes work properly. I think Franco is waiting for Ad to take a look at it - as whilst working in that area there are other bits that could do with changing.
You are correct in that there is an issue with some of the CSS files in that they live outside of the themes folder. The PR I have issued in core resolves that and so both rebellion and opnsense themes work properly. I think Franco is waiting for Ad to take a look at it - as whilst working in that area there are other bits that could do with changing.
1600
Development and Code Review / Re: dark theme first look
« on: January 22, 2018, 07:17:38 pm »
What's broken in the default theme? ( Apart from the colour scheme 
)
)
1601
Development and Code Review / Re: dark theme first look
« on: January 22, 2018, 04:13:31 pm »
With a bit of a push here and there I've fixed all of the external theme issues except the gateways status bits. The fixes may not make it to 18.1 as they involve moving most of the existing *.css files to the opnsense theme folder and altering a couple of files to correct the paths. As a result it needs to be thoroughly checked before I can issue a PR.
Looking good though.
Looking good though.
1602
Development and Code Review / Re: dark theme first look
« on: January 21, 2018, 04:26:34 pm »
Still some oddities there, but I'll issue fixes as I find and resolve them.
1603
Development and Code Review / Re: dark theme first look
« on: January 21, 2018, 01:34:49 pm »
OK, I have re-done the whole thing but this time used the scss and less files and then compiled them to create the new theme. I'll issue a PR shortly and see what you think.
1604
18.1 Legacy Series / Re: Aliases dosen't work(?)
« on: January 20, 2018, 01:45:48 pm »yes - clean install and restored configurations.
Did you do just the two patches mentioned here or three patches? There is one more that MIGHT affect you.
653651046fda533983bfc818d087fee5f073c7f6
That was one to make sure the aliastables folder is there and behaving.
1605
18.1 Legacy Series / Re: Aliases dosen't work(?)
« on: January 20, 2018, 01:28:13 pm »
are the aliases showing in rules.debug?