1
18.7 Legacy Series / Traverse Viking ADSL2+ PCI Modem
« on: December 12, 2018, 09:06:49 pm »
Hello,
As it's my first post, i'd like to say thanks to everyone who have been working on this! I've been using OPNSense for a few years now and I'm very happy with it.
I'm running OPNSense on a Soekris net5501-70 with a Traverse Viking ADSL2+ PCI Modem card since 2011 (well, started with m0n0wall at the time of course . It has always been working pretty well out of the box as far as I remember, never had to check or compile anything. But with newer versions of OPNSense, I have an issue with the PCI card.
For info, it's an ADSL2+ PCI Modem with a 8139C+ chipset from Realtek. It's shown as an ethernet card and use the "re" driver included in FreeBSD.
When I upgrade to 17.7, the card is not recorgnized anymore. I knew it was a driver issue because when i copy from /boot/kernel.old/ the old driver file if_re.ko to /boot/kernel/, the card is recognized again. A look at the driver commits confirms it (https://github.com/opnsense/src/commits/stable/18.7/sys/dev/re)
I'd like to know if it's possible to rollback to a specific driver or if i should recompile my own kernel for my Soekris.
I tried to follow some help here related to Realtek drivers: https://forum.opnsense.org/index.php?topic=9644.msg43933#msg43933
But as you can see, it failed.
Here are a few commands output:
Remark: it strangely shows as "none1" ; i can confirm you this interface doesn't exist
Question: does it mean that the driver is loaded but not in use?
As it's my first post, i'd like to say thanks to everyone who have been working on this! I've been using OPNSense for a few years now and I'm very happy with it.
I'm running OPNSense on a Soekris net5501-70 with a Traverse Viking ADSL2+ PCI Modem card since 2011 (well, started with m0n0wall at the time of course . It has always been working pretty well out of the box as far as I remember, never had to check or compile anything. But with newer versions of OPNSense, I have an issue with the PCI card.
For info, it's an ADSL2+ PCI Modem with a 8139C+ chipset from Realtek. It's shown as an ethernet card and use the "re" driver included in FreeBSD.
When I upgrade to 17.7, the card is not recorgnized anymore. I knew it was a driver issue because when i copy from /boot/kernel.old/ the old driver file if_re.ko to /boot/kernel/, the card is recognized again. A look at the driver commits confirms it (https://github.com/opnsense/src/commits/stable/18.7/sys/dev/re)
I'd like to know if it's possible to rollback to a specific driver or if i should recompile my own kernel for my Soekris.
I tried to follow some help here related to Realtek drivers: https://forum.opnsense.org/index.php?topic=9644.msg43933#msg43933
Code: [Select]
# opnsense-update -kr 18.7.2-re
Fetching kernel-18.7.2-re-i386.txz: .. failed
But as you can see, it failed.
Here are a few commands output:
Code: [Select]
# uname -a
FreeBSD io.lan 11.1-RELEASE-p17 FreeBSD 11.1-RELEASE-p17 bf74bfa8a63(stable/18.7) i386
Code: [Select]
# pciconf -lv
...
none1@pci0:0:14:0: class=0x020000 card=0x813910ec chip=0x813910ec rev=0x20 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL-8100/8101L/8139 PCI Fast Ethernet Adapter'
class = network
subclass = ethernet
...
Remark: it strangely shows as "none1" ; i can confirm you this interface doesn't exist
Code: [Select]
# dmesg | grep "device 14.0"
pci0: <network, ethernet> at device 14.0 (no driver attached)
Code: [Select]
# kldstat | grep if_re
*no output*
# kldload if_re
kldload: can't load if_re: module already loaded or in kernel
Question: does it mean that the driver is loaded but not in use?
Code: [Select]
# ls -l /boot/kernel/if_re.ko
-r-xr-xr-x 1 root wheel 520440 Dec 5 13:37 /boot/kernel/if_re.ko