Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - zitlo

#46
Quote from: franco on July 13, 2017, 10:59:03 PM
Yes, you do not receive a prefix (empty "::/64"). It's likely due to your device in front of OPNsense not giving out one.

Under Interfaces: [WAN], can you try to set "Directly send SOLICIT"?


Cheers,
Franco

DHCP6 log

ul 11 21:35:37 ZOS1337 dhcp6c[55924]: extracted an existing DUID from /var/db/dhcp6c_duid: 00:01:00:01:20:f6:7f:5e:00:0d:b9:47:1a:9c
Jul 11 21:35:37 ZOS1337 dhcp6c[55924]: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
Jul 11 21:35:37 ZOS1337 dhcp6c[55924]: failed initialize control message authentication
Jul 11 21:35:37 ZOS1337 dhcp6c[55924]: skip opening control port
Jul 11 21:35:37 ZOS1337 dhcp6c[55924]: <3>[interface] (9)
Jul 11 21:35:37 ZOS1337 dhcp6c[55924]: <5>[pppoe0] (6)
Jul 11 21:35:37 ZOS1337 dhcp6c[55924]: <3>begin of closure [{] (1)
Jul 11 21:35:37 ZOS1337 dhcp6c[55924]: <3>[script] (6)
Jul 11 21:35:37 ZOS1337 dhcp6c[55924]: <3>["/var/etc/dhcp6c_wan_script.sh"] (31)
Jul 11 21:35:37 ZOS1337 dhcp6c[55924]: <3>end of sentence [;] (1)
Jul 11 21:35:37 ZOS1337 dhcp6c[55924]: <3>end of closure [}] (1)
Jul 11 21:35:37 ZOS1337 dhcp6c[55924]: <3>end of sentence [;] (1)
Jul 11 21:35:37 ZOS1337 dhcp6c[55924]: called
Jul 11 21:35:37 ZOS1337 dhcp6c[55924]: called
Jul 11 21:35:37 ZOS1337 dhcp6c[56598]: reset a timer on pppoe0, state=INIT, timeo=0, retrans=891
Jul 11 21:35:38 ZOS1337 dhcp6c[56598]: Sending Solicit
Jul 11 21:35:38 ZOS1337 dhcp6c[56598]: a new XID (85ac73) is generated
Jul 11 21:35:38 ZOS1337 dhcp6c[56598]: set client ID (len 14)
Jul 11 21:35:38 ZOS1337 dhcp6c[56598]: set elapsed time (len 2)
Jul 11 21:35:38 ZOS1337 dhcp6c[56598]: send solicit to ff02::1:2%pppoe0
Jul 11 21:35:38 ZOS1337 dhcp6c[56598]: reset a timer on pppoe0, state=SOLICIT, timeo=0, retrans=1091
Jul 11 21:35:39 ZOS1337 dhcp6c[56598]: Sending Solicit
Jul 11 21:35:39 ZOS1337 dhcp6c[56598]: set client ID (len 14)
Jul 11 21:35:39 ZOS1337 dhcp6c[56598]: set elapsed time (len 2)
Jul 11 21:35:39 ZOS1337 dhcp6c[56598]: send solicit to ff02::1:2%pppoe0
Jul 11 21:35:39 ZOS1337 dhcp6c[56598]: reset a timer on pppoe0, state=SOLICIT, timeo=1, retrans=2083
Jul 11 21:35:41 ZOS1337 dhcp6c[56598]: Sending Solicit
Jul 11 21:35:41 ZOS1337 dhcp6c[56598]: set client ID (len 14)
Jul 11 21:35:41 ZOS1337 dhcp6c[56598]: set elapsed time (len 2)
Jul 11 21:35:41 ZOS1337 dhcp6c[56598]: send solicit to ff02::1:2%pppoe0
Jul 11 21:35:41 ZOS1337 dhcp6c[56598]: reset a timer on pppoe0, state=SOLICIT, timeo=2, retrans=3982
Jul 11 21:35:45 ZOS1337 dhcp6c[56598]: Sending Solicit
Jul 11 21:35:45 ZOS1337 dhcp6c[56598]: set client ID (len 14)
Jul 11 21:35:45 ZOS1337 dhcp6c[56598]: set elapsed time (len 2)
Jul 11 21:35:45 ZOS1337 dhcp6c[56598]: send solicit to ff02::1:2%pppoe0
Jul 11 21:35:45 ZOS1337 dhcp6c[56598]: reset a timer on pppoe0, state=SOLICIT, timeo=3, retrans=8065
Jul 11 21:35:53 ZOS1337 dhcp6c[56598]: Sending Solicit
Jul 11 21:35:53 ZOS1337 dhcp6c[56598]: set client ID (len 14)
Jul 11 21:35:53 ZOS1337 dhcp6c[56598]: set elapsed time (len 2)
Jul 11 21:35:53 ZOS1337 dhcp6c[56598]: send solicit to ff02::1:2%pppoe0
Jul 11 21:35:53 ZOS1337 dhcp6c[56598]: reset a timer on pppoe0, state=SOLICIT, timeo=4, retrans=16326
Jul 11 21:36:04 ZOS1337 dhcp6c[99764]: Sending Solicit
Jul 11 21:36:09 ZOS1337 dhcp6c[56598]: Sending Solicit
Jul 11 21:36:09 ZOS1337 dhcp6c[56598]: set client ID (len 14)
Jul 11 21:36:09 ZOS1337 dhcp6c[56598]: set elapsed time (len 2)
Jul 11 21:36:09 ZOS1337 dhcp6c[56598]: send solicit to ff02::1:2%pppoe0
Jul 11 21:36:09 ZOS1337 dhcp6c[56598]: reset a timer on pppoe0, state=SOLICIT, timeo=5, retrans=31928
Jul 11 21:36:26 ZOS1337 dhcp6c[56598]: removing an event on pppoe0, state=SOLICIT
Jul 11 21:36:26 ZOS1337 dhcp6c[56598]: executes /var/etc/dhcp6c_wan_script.sh
Jul 11 21:36:27 ZOS1337 dhcp6c[55726]: extracted an existing DUID from /var/db/dhcp6c_duid: 00:01:00:01:20:f6:7f:5e:00:0d:b9:47:1a:9c
Jul 11 21:36:27 ZOS1337 dhcp6c[55726]: failed to open /usr/local/etc/dhcp6cctlkey: No such file or directory
Jul 11 21:36:27 ZOS1337 dhcp6c[55726]: failed initialize control message authentication
Jul 11 21:36:27 ZOS1337 dhcp6c[55726]: skip opening control port
Jul 11 21:36:27 ZOS1337 dhcp6c[55726]: <3>[interface] (9)
Jul 11 21:36:27 ZOS1337 dhcp6c[55726]: <5>[pppoe0] (6)
Jul 11 21:36:27 ZOS1337 dhcp6c[55726]: <3>begin of closure [{] (1)
Jul 11 21:36:27 ZOS1337 dhcp6c[55726]: <3>[script] (6)
Jul 11 21:36:27 ZOS1337 dhcp6c[55726]: <3>["/var/etc/dhcp6c_wan_script.sh"] (31)
Jul 11 21:36:27 ZOS1337 dhcp6c[55726]: <3>end of sentence [;] (1)
Jul 11 21:36:27 ZOS1337 dhcp6c[55726]: <3>end of closure [}] (1)
Jul 11 21:36:27 ZOS1337 dhcp6c[55726]: <3>end of sentence [;] (1)
Jul 11 21:36:27 ZOS1337 dhcp6c[55726]: called
Jul 11 21:36:27 ZOS1337 dhcp6c[55726]: called
Jul 11 21:36:27 ZOS1337 dhcp6c[55879]: reset a timer on pppoe0, state=INIT, timeo=0, retrans=891
Jul 11 21:36:28 ZOS1337 dhcp6c[55879]: Sending Solicit
Jul 11 21:36:28 ZOS1337 dhcp6c[55879]: a new XID (7ac87) is generated
Jul 11 21:36:28 ZOS1337 dhcp6c[55879]: set client ID (len 14)
Jul 11 21:36:28 ZOS1337 dhcp6c[55879]: set elapsed time (len 2)
Jul 11 21:36:28 ZOS1337 dhcp6c[55879]: send solicit to ff02::1:2%pppoe0
Jul 11 21:36:28 ZOS1337 dhcp6c[55879]: reset a timer on pppoe0, state=SOLICIT, timeo=0, retrans=1091
Jul 11 21:36:29 ZOS1337 dhcp6c[55879]: Sending Solicit
Jul 11 21:36:29 ZOS1337 dhcp6c[55879]: set client ID (len 14)
Jul 11 21:36:29 ZOS1337 dhcp6c[55879]: set elapsed time (len 2)
Jul 11 21:36:29 ZOS1337 dhcp6c[55879]: send solicit to ff02::1:2%pppoe0
Jul 11 21:36:29 ZOS1337 dhcp6c[55879]: reset a timer on pppoe0, state=SOLICIT, timeo=1, retrans=2083
Jul 11 21:36:31 ZOS1337 dhcp6c[56598]: script "/var/etc/dhcp6c_wan_script.sh" terminated
Jul 11 21:36:31 ZOS1337 dhcp6c[56598]: exiting
Jul 11 21:36:31 ZOS1337 dhcp6c[55879]: Sending Solicit
Jul 11 21:36:31 ZOS1337 dhcp6c[55879]: set client ID (len 14)
Jul 11 21:36:31 ZOS1337 dhcp6c[55879]: set elapsed time (len 2)
Jul 11 21:36:31 ZOS1337 dhcp6c[55879]: send solicit to ff02::1:2%pppoe0
Jul 11 21:36:31 ZOS1337 dhcp6c[55879]: reset a timer on pppoe0, state=SOLICIT, timeo=2, retrans=3982
Jul 11 21:36:35 ZOS1337 dhcp6c[55879]: Sending Solicit
Jul 11 21:36:35 ZOS1337 dhcp6c[55879]: set client ID (len 14)
Jul 11 21:36:35 ZOS1337 dhcp6c[55879]: set elapsed time (len 2)
Jul 11 21:36:35 ZOS1337 dhcp6c[55879]: send solicit to ff02::1:2%pppoe0
Jul 11 21:36:35 ZOS1337 dhcp6c[55879]: reset a timer on pppoe0, state=SOLICIT, timeo=3, retrans=8065
Jul 11 21:36:43 ZOS1337 dhcp6c[55879]: Sending Solicit
Jul 11 21:36:43 ZOS1337 dhcp6c[55879]: set client ID (len 14)
Jul 11 21:36:43 ZOS1337 dhcp6c[55879]: set elapsed time (len 2)
Jul 11 21:36:43 ZOS1337 dhcp6c[55879]: send solicit to ff02::1:2%pppoe0
Jul 11 21:36:43 ZOS1337 dhcp6c[55879]: reset a timer on pppoe0, state=SOLICIT, timeo=4, retrans=16326
Jul 11 21:37:00 ZOS1337 dhcp6c[55879]: Sending Solicit
Jul 11 21:37:00 ZOS1337 dhcp6c[55879]: set client ID (len 14)
Jul 11 21:37:00 ZOS1337 dhcp6c[55879]: set elapsed time (len 2)
Jul 11 21:37:00 ZOS1337 dhcp6c[55879]: send solicit to ff02::1:2%pppoe0
Jul 11 21:37:00 ZOS1337 dhcp6c[55879]: reset a timer on pppoe0, state=SOLICIT, timeo=5, retrans=31928
Jul 11 21:37:32 ZOS1337 dhcp6c[55879]: Sending Solicit
Jul 11 21:37:32 ZOS1337 dhcp6c[55879]: set client ID (len 14)
Jul 11 21:37:32 ZOS1337 dhcp6c[55879]: set elapsed time (len 2)
Jul 11 21:37:32 ZOS1337 dhcp6c[55879]: send solicit to ff02::1:2%pppoe0
Jul 11 21:37:32 ZOS1337 dhcp6c[55879]: reset a timer on pppoe0, state=SOLICIT, timeo=6, retrans=64469
Jul 11 21:37:57 ZOS1337 dhcp6c[99764]: Sending Solicit
Jul 11 21:44:31 ZOS1337 dhcp6c[55879]: Sending Solicit
Jul 11 21:44:31 ZOS1337 dhcp6c[55879]: set client ID (len 14)
Jul 11 21:44:31 ZOS1337 dhcp6c[55879]: set elapsed time (len 2)
Jul 11 21:44:31 ZOS1337 dhcp6c[55879]: send solicit to ff02::1:2%pppoe0
Jul 11 21:44:31 ZOS1337 dhcp6c[55879]: reset a timer on pppoe0, state=SOLICIT, timeo=10, retrans=111000
Jul 11 21:45:40 ZOS1337 dhcp6c[99764]: Sending Solicit
Jul 11 21:46:22 ZOS1337 dhcp6c[55879]: Sending Solicit
Jul 11 21:46:22 ZOS1337 dhcp6c[55879]: set client ID (len 14)
Jul 11 21:46:22 ZOS1337 dhcp6c[55879]: set elapsed time (len 2)
Jul 11 21:46:22 ZOS1337 dhcp6c[55879]: send solicit to ff02::1:2%pppoe0
Jul 11 21:46:22 ZOS1337 dhcp6c[55879]: reset a timer on pppoe0, state=SOLICIT, timeo=11, retrans=120720
Jul 11 21:47:31 ZOS1337 dhcp6c[99764]: Sending Solicit
Jul 11 21:48:23 ZOS1337 dhcp6c[55879]: Sending Solicit
Jul 11 21:48:23 ZOS1337 dhcp6c[55879]: set client ID (len 14)
Jul 11 21:48:23 ZOS1337 dhcp6c[55879]: set elapsed time (len 2)
Jul 11 21:48:23 ZOS1337 dhcp6c[55879]: send solicit to ff02::1:2%pppoe0
Jul 11 21:48:23 ZOS1337 dhcp6c[55879]: reset a timer on pppoe0, state=SOLICIT, timeo=12, retrans=108504
Jul 11 21:49:29 ZOS1337 dhcp6c[99764]: Sending Solicit
Jul 11 21:50:11 ZOS1337 dhcp6c[55879]: Sending Solicit
Jul 11 21:50:11 ZOS1337 dhcp6c[55879]: set client ID (len 14)
Jul 11 21:50:11 ZOS1337 dhcp6c[55879]: set elapsed time (len 2)
Jul 11 21:50:11 ZOS1337 dhcp6c[55879]: send solicit to ff02::1:2%pppoe0
Jul 11 21:50:11 ZOS1337 dhcp6c[55879]: reset a timer on pppoe0, state=SOLICIT, timeo=13, retrans=110940


#47
Quote from: franco on July 13, 2017, 10:59:03 PM
Yes, you do not receive a prefix (empty "::/64"). It's likely due to your device in front of OPNsense not giving out one.

Under Interfaces: [WAN], can you try to set "Directly send SOLICIT"?


Cheers,
Franco

OK SOLICIT is active

cat /var/etc/radvd.conf
# Automatically Generated, do not edit
# Generated config for dhcp6 delegation from wan on lan
interface igb1 {
AdvSendAdvert on;
MinRtrAdvInterval 3;
MaxRtrAdvInterval 10;
AdvLinkMTU 1500;
AdvOtherConfigFlag on;
prefix ::/64 {
AdvOnLink on;
AdvAutonomous on;
AdvRouterAddr on;
};
RDNSS 2620:0:ccc::2 2620:0:ccd::2 { };
DNSSL localdomain { };
};
#48

igb0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4400b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWTSO,TXCSUM_IPV6>
ether 00:0d:b9:47:1a:9c
inet6 fe80::20d:b9ff:fe47:1a9c%igb0 prefixlen 64 scopeid 0x1
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
igb1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4500b8<VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,VLAN_HWFILTER,VLAN_HWTSO,TXCSUM_IPV6>
ether 00:0d:b9:47:1a:9d
inet 192.168.91.254 netmask 0xffffff00 broadcast 192.168.91.255
inet6 fe80::1:1%igb1 prefixlen 64 scopeid 0x2
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
igb2: flags=8c02<BROADCAST,OACTIVE,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=6403bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
ether 00:0d:b9:47:1a:9e
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect
status: no carrier
enc0: flags=41<UP,RUNNING> metric 0 mtu 1536
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: enc
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: lo
pflog0: flags=100<PROMISC> metric 0 mtu 33160
groups: pflog
pfsync0: flags=0<> metric 0 mtu 1500
groups: pfsync
syncpeer: 0.0.0.0 maxupd: 128 defer: off
ovpns1: flags=8010<POINTOPOINT,MULTICAST> metric 0 mtu 1500
options=80000<LINKSTATE>
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
groups: tun openvpn
igb1_vlan20: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:0d:b9:47:1a:9d
inet6 fe80::20d:b9ff:fe47:1a9d%igb1_vlan20 prefixlen 64 scopeid 0x9
inet 192.168.20.254 netmask 0xffffff00 broadcast 192.168.20.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
vlan: 20 vlanpcp: 0 parent interface: igb1
groups: vlan
igb1_vlan30: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:0d:b9:47:1a:9d
inet6 fe80::20d:b9ff:fe47:1a9d%igb1_vlan30 prefixlen 64 scopeid 0xa
inet 192.168.30.254 netmask 0xffffff00 broadcast 192.168.30.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: Ethernet autoselect (1000baseT <full-duplex>)
status: active
vlan: 30 vlanpcp: 0 parent interface: igb1
groups: vlan
pppoe0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0 mtu 1492
inet6 fe80::20d:b9ff:fe47:1a9c%pppoe0 prefixlen 64 scopeid 0xb
inet6 fe80::20d:b9ff:fe47:1a9d%pppoe0 prefixlen 64 scopeid 0xb
inet6 2003:c2:ebbf:2ea9:20d:xxxx:xxxx:xxxx prefixlen 64 autoconf
inet 46.91.xxx.xx --> 62.155.241.xxx  netmask 0xffffffff
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
#49
Quote from: Space on July 13, 2017, 10:57:37 PM
Hi,

if you check the interfaces ... on which interface do you see an IPv6 address? Is it on WAN or LAN?

What messages do you see in the dhcp log?
Best regards,

    Jochen
only on ppoe0

pppoe0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0 mtu 1492
inet6 fe80::20d:b9ff:fe47:1a9c%pppoe0 prefixlen 64 scopeid 0xb
inet6 fe80::20d:b9ff:fe47:1a9d%pppoe0 prefixlen 64 scopeid 0xb
inet6 2003:c2:ebbf:2ea9:xxx:xxxx:xxxx:1a9c prefixlen 64 autoconf
inet 46.91.190.79 --> 62.155.241.133  netmask 0xffffffff
nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
#50
mg@ZOS1337:~ % cat /var/etc/radvd.conf
# Automatically Generated, do not edit
# Generated config for dhcp6 delegation from wan on lan
interface igb1 {
   AdvSendAdvert on;
   MinRtrAdvInterval 3;
   MaxRtrAdvInterval 10;
   AdvLinkMTU 1500;
   AdvOtherConfigFlag on;
      prefix ::/64 {
      AdvOnLink on;
      AdvAutonomous on;
      AdvRouterAddr on;
   };
   RDNSS 2620:0:ccc::2 2620:0:ccd::2 { };
   DNSSL localdomain { };
};
#51
I can ping any host from my opnsense GUI:

PING6(56=40+8+8 bytes) 2003:c2:ebbf:1d64:20d:xxxx:xxxx:xxxx --> 2001:1900:2254:206a::50:0
16 bytes from 2001:1900:2254:206a::50:0, icmp_seq=0 hlim=58 time=171.710 ms
16 bytes from 2001:1900:2254:206a::50:0, icmp_seq=1 hlim=58 time=171.586 ms
16 bytes from 2001:1900:2254:206a::50:0, icmp_seq=2 hlim=58 time=171.838 ms

--- freebsd.org ping6 statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/std-dev = 171.586/171.711/171.838/0.103 ms
#52
I made two firewall rules:

WAN: IPv4+6 ICMP   Allow all
LAN: IPv4+6 ICMP   Allow all
#53
When I add some ipv6 DNS Servers I get an error:
#54
So I made a few screenshots:
#55
Hey Leute,

also mit dem "richtigen" Nullmodem Kabel funktioniert das einwandfrei, habe das jetzt über OSX mit dem Terminal über Screen gemacht, kann man nicht meckern. Den Stick (USB3) habe ich mit WIN32Disc Imager unter Windows gebaut, keine Probleme: http://blog.hinni.solutions/pfsense-on-a-apu1d4/
#56
Hello,

@gothbert: no surica is off.
@franco: I will check when Im back home

thank you all
#57
Hey,

do someone have a working configuration with a ppoe over modem connection? I still have a problem with ipv6 and opnsense:

- ISP Deutsche Telekom
- opnsense 17.1.9
- Vigor 130 modem only (vlan7)
- Unifi AC PRO Access Point
I configured my opnsense in this way: https://moerbst.wordpress.com/2016/07/31/ipv6mit-pfsense-an-dsl-der-telekom/

I got a ipv6 address for my opnsense (working) but my clients are still without ipv6 address :-(

maybe someone can help me!

thank you

#58
Hallo,

folgendes Problem:

ich habe den user root im Webinterface deaktiviert, mir dann einen eigegenen admin user angelegt über das Webinterface.
Ich habe openvpn über tcp 443 laufen und wohl (nehme ich an) die Firewall falsch konfiguriert, jedenfalls ist das Webinterface jetzt nicht mehr über TCP 443 erreichbar. TCP80 redirected auf 443 (geht also auch nicht). So über die Serielle Schnittstelle kann ich mich nicht mit root einloggen (deaktiviert) sudo ist standardmäßig auch deaktiviert...
Hat jemand eine Idee wie ich wieder Zugriff auf die GUI bekommen könnte?

Vielen Dank! 
#59
Ok, liegt wahrscheinlich am Kabel. Ich brauche ein null modem Kabel.
#60
Hallo,

vielleicht kann mir hier jemand helfen.

Ich möchte OPNsense auf ein APU3B4 installieren. Ich habe die Anleitung oben befolgt aber bekomme in Putty nur einen schwarzen Bildschirm und kann mich garnicht mit dem APU verbinden.

Ich benutze ein serielles Kabel: - DB9 9 pin male to male. Wired straight-through.
Putty unter Windows.