76
German - Deutsch / sporadische Pausen (freezes) ....
« on: November 21, 2017, 05:27:28 pm »
Hallo,
ich habe ein
1x Futro S550-2
1x 2GB DDR2-800 RAM
1x D2745 (PCIex 4-Port Netzwerkkarte mit Intel 82580)
1xUSB2.0 4GB USB Stick
OPNSense 4GB Nano, Serial Boot
mir ist aufgefallen das, dass System sporadische Pausen einlegt, ich habe schon andere USB Sticks genommen, eine andere Netzwerkkarte, anderen RAM Speicher, aber immer treten ab und zu sporadische "freezes" Pausen auf, seih es wenn ich mich anmelden will auf der Weboberfläche oder via SSH, manchmal arbeite ich auf der SHELL (Menupunkt , selbst dort treten diese sporadischen Pausen auf aber auch wenn ich im Webmenu durchklicke ...
ich benutze OPNsense seit 17.1, derzeit ist die "preview" 18.1 drauf.
Kann mir jemand sagen wie ich diese sporadischen Pausen finde bzw. wodurch diese entstehen ... weil es ist echt nervend.
Ich habe auch nebenbei mal das System mit einer Systemrescuecd gebootet, bzw auch mal ein Debian Minimal installiert auf externer USB Festplatte, dort , bei beiden Systemen traten diese Fehler nicht auf.
ich habe ein
1x Futro S550-2
1x 2GB DDR2-800 RAM
1x D2745 (PCIex 4-Port Netzwerkkarte mit Intel 82580)
1xUSB2.0 4GB USB Stick
OPNSense 4GB Nano, Serial Boot
mir ist aufgefallen das, dass System sporadische Pausen einlegt, ich habe schon andere USB Sticks genommen, eine andere Netzwerkkarte, anderen RAM Speicher, aber immer treten ab und zu sporadische "freezes" Pausen auf, seih es wenn ich mich anmelden will auf der Weboberfläche oder via SSH, manchmal arbeite ich auf der SHELL (Menupunkt , selbst dort treten diese sporadischen Pausen auf aber auch wenn ich im Webmenu durchklicke ...
ich benutze OPNsense seit 17.1, derzeit ist die "preview" 18.1 drauf.
Code: [Select]
root@opernsense:~ # uptime
5:22PM up 56 mins, 1 users, load averages: 0.79, 0.54, 0.48
Code: [Select]
root@opernsense:~ # ps aux
USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND
root 11 100.0 0.0 0 16 - RL 16:26 52:33.65 [idle]
root 0 0.0 0.0 0 224 - DLs 16:26 0:00.01 [kernel]
root 1 0.0 0.0 5044 916 - ILs 16:26 0:00.07 /sbin/init --
root 2 0.0 0.0 0 16 - DL 16:26 0:00.00 [crypto]
root 3 0.0 0.0 0 16 - DL 16:26 0:00.00 [crypto returns]
root 4 0.0 0.0 0 32 - DL 16:26 0:00.19 [cam]
root 5 0.0 0.0 0 16 - DL 16:26 0:00.00 [sctp_iterator]
root 6 0.0 0.0 0 16 - DL 16:26 0:01.79 [pf purge]
root 7 0.0 0.0 0 16 - DL 16:26 0:00.59 [rand_harvestq]
root 8 0.0 0.0 0 16 - DL 16:26 0:00.00 [soaiod1]
root 9 0.0 0.0 0 16 - DL 16:26 0:00.00 [soaiod2]
root 10 0.0 0.0 0 16 - DL 16:26 0:00.00 [audit]
root 12 0.0 0.0 0 384 - WL 16:26 0:15.48 [intr]
root 13 0.0 0.0 0 16 - DL 16:26 0:00.00 [ng_queue]
root 14 0.0 0.0 0 48 - DL 16:26 0:00.08 [geom]
root 15 0.0 0.0 0 480 - DL 16:26 0:00.53 [usb]
root 16 0.0 0.0 0 16 - DL 16:26 0:00.00 [soaiod3]
root 17 0.0 0.0 0 16 - DL 16:26 0:00.00 [soaiod4]
root 18 0.0 0.0 0 48 - DL 16:26 0:00.28 [pagedaemon]
root 19 0.0 0.0 0 16 - DL 16:26 0:00.00 [vmdaemon]
root 20 0.0 0.0 0 16 - DL 16:26 0:00.00 [pagezero]
root 21 0.0 0.0 0 32 - DL 16:26 0:00.07 [bufdaemon]
root 22 0.0 0.0 0 16 - DL 16:26 0:00.02 [bufspacedaemon]
root 23 0.0 0.0 0 16 - DL 16:26 0:00.21 [syncer]
root 24 0.0 0.0 0 16 - DL 16:26 0:00.02 [vnlru]
root 363 0.0 1.0 102108 19300 - Is 16:27 0:00.57 /usr/local/bin/python2.7 /usr/local/opnsense/service/configd.py
root 365 0.0 1.2 110560 23948 - I 16:27 0:08.08 /usr/local/bin/python2.7 /usr/local/opnsense/service/configd.py console
root 398 0.0 0.3 9576 5124 - Is 16:27 0:00.01 /sbin/devd
root 25337 0.0 0.1 1076180 2832 - Ss 16:27 0:00.14 /usr/local/sbin/syslogd -s -c -c -P /var/run/syslog.pid -l /var/dhcpd/var/run/log -f /var/etc/syslog.conf
root 36409 0.0 0.1 10372 1980 - Ss 16:28 0:00.42 /usr/sbin/powerd -b hadp -a hadp -n hadp
root 37056 0.0 0.3 1117360 6596 - Ss 16:46 0:00.34 sshd: root@pts/0 (sshd)
root 53675 0.0 0.3 1117360 6788 - Ss 16:58 0:00.24 sshd: root@notty (sshd)
root 54898 0.0 0.3 1117360 7092 - Is 16:58 0:00.07 sshd: root@internal-sftp (sshd)
root 58522 0.0 0.1 12504 2340 - Ss 16:28 0:00.03 /usr/sbin/cron -s
root 61059 0.0 0.1 1078472 2892 - Ss 16:27 0:00.68 /usr/local/sbin/filterlog -i pflog0 -p /var/run/filterlog.pid
root 62032 0.0 0.3 1073756 5676 - Ss 16:28 0:00.40 /usr/local/sbin/ntpd -g -c /var/etc/ntpd.conf -p /var/run/ntpd.pid
root 64360 0.0 0.3 1092484 5900 - Is 16:27 0:00.01 /usr/local/sbin/sshd
root 65446 0.0 0.4 49292 8908 - S 16:27 0:00.84 /usr/local/sbin/lighttpd -f /var/etc/lighty-webConfigurator.conf
root 65608 0.0 0.9 108924 17848 - Is 16:27 0:00.10 /usr/local/bin/php-cgi
root 65635 0.0 0.9 108924 17596 - Is 16:27 0:00.09 /usr/local/bin/php-cgi
root 66343 0.0 1.1 111296 22036 - I 16:27 0:03.86 /usr/local/bin/php-cgi
root 66536 0.0 1.2 113344 24352 - I 16:27 0:02.98 /usr/local/bin/php-cgi
root 66742 0.0 1.1 111296 21848 - I 16:27 0:02.43 /usr/local/bin/php-cgi
root 66835 0.0 1.2 113280 23500 - I 16:27 0:00.44 /usr/local/bin/php-cgi
root 67103 0.0 1.1 111296 21776 - I 16:27 0:00.25 /usr/local/bin/php-cgi
root 67356 0.0 1.0 111104 20940 - I 16:27 0:00.17 /usr/local/bin/php-cgi
unbound 68656 0.0 0.6 41404 11260 - Ss 17:10 0:00.28 /usr/local/sbin/unbound -c /var/unbound/unbound.conf
root 79473 0.0 0.1 10392 2028 u0 Is+ 16:28 0:00.01 /usr/libexec/getty std.57600 ttyu0
root 78076 0.0 0.1 10392 2028 v0 Is+ 16:28 0:00.01 /usr/libexec/getty Pc ttyv0
root 78311 0.0 0.1 10392 2028 v1 Is+ 16:28 0:00.01 /usr/libexec/getty Pc ttyv1
root 78488 0.0 0.1 10392 2032 v2 Is+ 16:28 0:00.01 /usr/libexec/getty Pc ttyv2
root 78530 0.0 0.1 10392 2024 v3 Is+ 16:28 0:00.01 /usr/libexec/getty Pc ttyv3
root 78807 0.0 0.1 10392 2032 v4 Is+ 16:28 0:00.01 /usr/libexec/getty Pc ttyv4
root 78889 0.0 0.1 10392 2028 v5 Is+ 16:28 0:00.01 /usr/libexec/getty Pc ttyv5
root 78986 0.0 0.1 10392 2028 v6 Is+ 16:28 0:00.01 /usr/libexec/getty Pc ttyv6
root 79234 0.0 0.1 10392 2028 v7 Is+ 16:28 0:00.01 /usr/libexec/getty Pc ttyv7
root 7238 0.0 0.1 1084680 2980 0 R+ 17:23 0:00.01 ps aux
root 37886 0.0 0.1 1078888 2952 0 Is 16:46 0:00.01 /bin/sh /usr/local/etc/rc.initial
root 37918 0.0 0.2 1079312 4816 0 S 16:46 0:00.20 /bin/csh
Code: [Select]
root@opernsense:~ # vmstat -s
2274165 cpu context switches
397851 device interrupts
292365 software interrupts
2666445 traps
10208714 system calls
24 kernel threads created
885 fork() calls
4203 vfork() calls
4 rfork() calls
0 swap pager pageins
0 swap pager pages paged in
0 swap pager pageouts
0 swap pager pages paged out
2226 vnode pager pageins
21022 vnode pager pages paged in
0 vnode pager pageouts
0 vnode pager pages paged out
0 page daemon wakeups
243323 pages examined by the page daemon
0 clean page reclamation shortfalls
0 pages reactivated by the page daemon
291378 copy-on-write faults
0 copy-on-write optimized faults
1740023 zero fill pages zeroed
4 zero fill pages prezeroed
18 intransit blocking page faults
2120060 total VM faults taken
2033 page faults requiring I/O
0 pages affected by kernel thread creation
1926942 pages affected by fork()
3426547 pages affected by vfork()
10768 pages affected by rfork()
2343429 pages freed
0 pages freed by daemon
618469 pages freed by exiting processes
19633 pages active
27874 pages inactive
0 pages in the laundry queue
21587 pages wired down
424665 pages free
4096 bytes per page
1522066 total name lookups
cache hits (77% pos + 1% neg) system 0% per-directory
deletions 0%, falsehits 0%, toolong 0%
Code: [Select]
root@opernsense:~ # df -hm
Filesystem 1M-blocks Used Avail Capacity Mounted on
/dev/ufs/OPNsense_Nano 3833 1375 2151 39% /
devfs 0 0 0 100% /dev
tmpfs 1667 12 1654 1% /var
tmpfs 1655 0 1654 0% /tmp
devfs 0 0 0 100% /var/dhcpd/dev
Code: [Select]
root@opernsense:~ # dmesg
Copyright (c) 1992-2017 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.1-RELEASE-p2 #0 c967ed374(master): Tue Oct 17 20:39:21 CEST 2017
root@sensey64:/usr/obj/usr/src/sys/SMP amd64
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on LLVM 4.0.0)
VT(vga): resolution 640x480
[HBSD LOG] logging to system: enabled
[HBSD LOG] logging to user: disabled
[HBSD HARDENING] procfs hardening: enabled
[HBSD ASLR] status: opt-out
[HBSD ASLR] mmap: 30 bit
[HBSD ASLR] exec base: 30 bit
[HBSD ASLR] stack: 42 bit
[HBSD ASLR] vdso: 28 bit
[HBSD ASLR] map32bit: 18 bit
[HBSD ASLR] disallow MAP_32BIT mode mmap: opt-out
[HBSD ASLR (compat)] status: opt-out
[HBSD ASLR (compat)] mmap: 14 bit
[HBSD ASLR (compat)] exec base: 14 bit
[HBSD ASLR (compat)] stack: 14 bit
[HBSD ASLR (compat)] vdso: 8 bit
[HBSD SEGVGUARD] status: opt-out
[HBSD SEGVGUARD] expiry: 120 sec
[HBSD SEGVGUARD] suspension: 600 sec
[HBSD SEGVGUARD] maxcrashes: 5
CPU: AMD Sempron(tm) Processor 200U (1000.01-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x60ff2 Family=0xf Model=0x6f Stepping=2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x119<LAHF,ExtAPIC,CR8,Prefetch>
real memory = 2147483648 (2048 MB)
avail memory = 2000396288 (1907 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <PTLTD APIC >
random: unblocking device.
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 2.1> irqs 0-23 on motherboard
Timecounter "TSC" frequency 1000011024 Hz quality 800
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
taskqgroup_adjust failed cnt: 1 stride: 1 mp_ncpus: 1 smp_started: 0
random: entropy device external interface
wlan: mac acl policy registered
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff810a67e0, 0) error 19
kbd1 at kbdmux0
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: Can't map interrupt.
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed00fff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xfc000000-0xfdffffff,0xfe200000-0xfe20ffff,0xfe100000-0xfe1fffff irq 18 at device 5.0 on pci1
vgapci0: Boot video device
pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci2: <ACPI PCI bus> on pcib2
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xa000-0xa01f mem 0xfe380000-0xfe3fffff,0xfe300000-0xfe303fff irq 17 at device 0.0 on pci2
igb0: Using MSIX interrupts with 2 vectors
igb0: Ethernet address: 00:19:99:b9:d6:39
igb0: netmap queues/slots: TX 1/1024, RX 1/1024
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xa020-0xa03f mem 0xfe400000-0xfe47ffff,0xfe304000-0xfe307fff irq 18 at device 0.1 on pci2
igb1: Using MSIX interrupts with 2 vectors
igb1: Ethernet address: 00:19:99:b9:d6:3a
igb1: netmap queues/slots: TX 1/1024, RX 1/1024
igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xa040-0xa05f mem 0xfe480000-0xfe4fffff,0xfe308000-0xfe30bfff irq 19 at device 0.2 on pci2
igb2: Using MSIX interrupts with 2 vectors
igb2: Ethernet address: 00:19:99:b9:d6:3b
igb2: netmap queues/slots: TX 1/1024, RX 1/1024
igb3: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xa060-0xa07f mem 0xfe500000-0xfe57ffff,0xfe30c000-0xfe30ffff irq 16 at device 0.3 on pci2
igb3: Using MSIX interrupts with 2 vectors
igb3: Ethernet address: 00:19:99:b9:d6:3c
igb3: netmap queues/slots: TX 1/1024, RX 1/1024
pcib3: <PCI-PCI bridge> at device 6.0 on pci0
pcib3: failed to allocate initial I/O port window: 0-0xfff
pcib3: failed to allocate initial memory window: 0-0xfffff
pcib3: [GIANT-LOCKED]
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci3: <ACPI PCI bus> on pcib4
re0: <Realtek PCIe GBE Family Controller> port 0xb000-0xb0ff mem 0xfe010000-0xfe010fff,0xfe000000-0xfe00ffff irq 19 at device 0.0 on pci3
re0: Using Memory Mapping!
re0: Using line-based interrupt
re0: ASPM disabled
re0: version:1.94.01
re0: Ethernet address: 00:19:99:8c:61:b4
This product is covered by one or more of the following patents:
US6,570,884, US6,115,776, and US6,327,625.
re0: Ethernet address: 00:19:99:8c:61:b4
ohci0: <OHCI (generic) USB controller> mem 0xfe804000-0xfe804fff irq 16 at device 19.0 on pci0
usbus0 on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xfe805000-0xfe805fff irq 17 at device 19.1 on pci0
usbus1 on ohci1
ohci2: <OHCI (generic) USB controller> mem 0xfe806000-0xfe806fff irq 18 at device 19.2 on pci0
usbus2 on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xfe807000-0xfe807fff irq 17 at device 19.3 on pci0
usbus3 on ohci3
ohci4: <OHCI (generic) USB controller> mem 0xfe808000-0xfe808fff irq 18 at device 19.4 on pci0
usbus4 on ohci4
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe80a000-0xfe80a0ff irq 19 at device 19.5 on pci0
ehci0: AMD SB600/700 quirk applied
usbus5: EHCI version 1.0
usbus5 on ehci0
atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci4: <ACPI PCI bus> on pcib5
acpi_syscontainer0: <System Container> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (57600,n,8,1)
ppc0: cannot reserve I/O port range
powernow0: <Cool`n'Quiet K8> on cpu0
Timecounters tick every 1.000 msec
nvme cam probe device init
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
ugen0.1: <ATI OHCI root HUB> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI OHCI root HUB> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI OHCI root HUB> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen3.1: <ATI OHCI root HUB> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI OHCI root HUB> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI EHCI root HUB> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
Trying to mount root from ufs:/dev/ufs/OPNsense_Nano [rw]...
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
uhub5: 10 ports with 10 removable, self powered
ugen5.2: <General USB Flash Disk> at usbus5
umass0 on uhub5
umass0: <General USB Flash Disk, class 0/0, rev 2.00/11.00, addr 2> on usbus5
umass0: SCSI over Bulk-Only; quirks = 0x4000
Root mount waiting for: usbus5
umass0:1:0: Attached to scbus1
mountroot: waiting for device /dev/ufs/OPNsense_Nano...
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <General USB Flash Disk 1100> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 0332713080000297
da0: 40.000MB/s transfers
da0: 3840MB (7864320 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
re0: link state changed to UP
bridge0: Ethernet address: 02:56:13:37:2b:00
bridge0: link state changed to UP
igb0: promiscuous mode enabled
igb1: promiscuous mode enabled
igb2: promiscuous mode enabled
igb3: promiscuous mode enabled
pflog0: promiscuous mode enabled
igb0: link state changed to UP
Kann mir jemand sagen wie ich diese sporadischen Pausen finde bzw. wodurch diese entstehen ... weil es ist echt nervend.
Ich habe auch nebenbei mal das System mit einer Systemrescuecd gebootet, bzw auch mal ein Debian Minimal installiert auf externer USB Festplatte, dort , bei beiden Systemen traten diese Fehler nicht auf.