Messages

right, even if commercial, still can have a very simple top set of icons to navigate the 'ecosystem' more usable and more visible, right now, each is an Island.. took me few days to figure there are docs :) :)

I'm totally new to this area, went to docs.opnsense.org, hit many keywords, and found not much.  I'm not sure if this is b/c docs are not there, OR maybe the search/index is broken. 

One suggestion is to go after 10-50 keywords, and make sure that they return the correct docs..  some words that come to mind would be network related like:  sshd, pppoe, multiwan, etc. etc.  these all return almost nothing, or not relevant things.

Same suggestion goes to the Web UI, searching on TOP/right, should find things like: "ssh, secure, etc." and many more that right now return nothing, but they do exist, just hard to find for new comers.  Maybe if it searched ALL the attributes, not just the high-level headers, that would be better? not sure. something to consider maybe.

Stormy.

I've confirmed again, only the first ppp connection works after a fresh reboot. There after, any disconnect , even by button on the UI, the ppp connection cannot be made again..  I can see the mpd process running:

Code Select Expand

root   94850   0.7  0.1  42824  5996  -  Ss   21:56    0:00.00 /usr/local/sbin/mpd5 -b -k -d /var/etc -f mpd_opt3.conf -p /var


Looking in /var/etc, found TWO mpd_opt*.conf files:

Code Select Expand

root@OPNsense:/var/etc # diff mpd_opt1.conf mpd_opt3.conf
9c9
<   create bundle static opt1
---
>   create bundle static opt3
11c11
<   set iface name pppoe1
---
>   set iface name pppoe0
19,20c19,20
<   create link static opt1_link0 pppoe
<   set link action bundle opt1
---
>   create link static opt3_link0 pppoe
>   set link action bundle opt3
31c31
<   set pppoe iface igb2
---
>   set pppoe iface igb3


the UI only shows ONE file (opt3/igb3), the other was deleted via the UI many hours ago..  removed it, still problem persisted, so removed all pppoe, and re-created again from the UI, still problem exists (now only one mpd_opt3.conf file exists).


Looking in /var/log/messages, seeing:

Code Select Expand

Jan 23 21:08:32 OPNsense configd.py: [f00082c9-2cc1-44a4-ac9f-a261270fd770] updating dyndns opt3
Jan 23 21:08:32 OPNsense configd.py: [68d909a7-0993-43bd-9db0-1828f2e97fca] Linkup stopping igb3
Jan 23 21:08:32 OPNsense opnsense: /usr/local/etc/rc.linkup: DEVD Ethernet detached event for opt3
Jan 23 21:08:34 OPNsense configd.py: [6f62cfcf-03bb-4a87-82d6-211113f4f245] Linkup starting igb3
Jan 23 21:08:35 OPNsense opnsense: /usr/local/etc/rc.linkup: DEVD Ethernet attached event for opt3
Jan 23 21:08:35 OPNsense opnsense: /usr/local/etc/rc.linkup: HOTPLUG: Configuring interface opt3
Jan 23 21:08:35 OPNsense opnsense: /usr/local/etc/rc.linkup: The command `/sbin/ifconfig -m 'pppoe0'' failed to execute ifconfig: interface pppoe0 does not exist
Jan 23 21:08:35 OPNsense opnsense: /usr/local/etc/rc.linkup: The command '/sbin/ifconfig 'pppoe0' inet6 -accept_rtadv' returned exit code '1', the output was 'ifconfig: interface pppoe0 does not exist'
Jan 23 21:08:35 OPNsense kernel: igb3: link state changed to DOWN
Jan 23 21:08:35 OPNsense kernel: ng0: changing name to 'pppoe0'
Jan 23 21:08:37 OPNsense kernel: igb3: link state changed to UP
Jan 23 21:08:37 OPNsense configd.py: [c7ad18c6-8f04-449f-a9cd-cd9f47934a3f] updating dyndns opt3
Jan 23 21:08:38 OPNsense configd.py: [20fb0f62-6d13-46cc-a292-147cdc696c88] Linkup stopping igb3
Jan 23 21:08:38 OPNsense opnsense: /usr/local/etc/rc.linkup: DEVD Ethernet detached event for opt3



the contents of mdp_opt3.conf appear to be correct:

Code Select Expand

root@OPNsense:/var/etc # cat mpd_opt3.conf
startup:
  # configure the console
  set console close
  # configure the web server
  set web close

default:
pppoeclient:
  create bundle static opt3
  set bundle enable ipv6cp
  set iface name pppoe0
  set iface route default
  set iface disable on-demand
  set iface idle 0
  set iface enable tcpmssfix
  set iface up-script /usr/local/sbin/ppp-linkup
  set iface down-script /usr/local/sbin/ppp-linkdown
  set ipcp ranges 0.0.0.0/0 0.0.0.0/0
  create link static opt3_link0 pppoe
  set link action bundle opt3
  set link disable multilink
  set link keep-alive 10 60
  set link max-redial 0
  set link disable chap pap
  set link accept chap pap eap
  set link disable incoming
  set link mtu 1492
  set auth authname "stormy@isp"
  set auth password mypass
  set pppoe service ""
  set pppoe iface igb3
        open


I've setup pppoe on one interface, nothing else is connected to the opn box, the pppoe succeeds only after a fresh reboot. As soon as clicking disconnect (or pulling network cable out), then clicking connect, and the session repeatedly fails to connect, for hours.. rebooting the OPN box, and connection is made right away.

this is a sample log:

Code Select Expand

Jan 23 19:35:13 OPNsense ppp: [opt3_link0] PAP: using authname "stormy@isp"
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] PAP: sending REQUEST #1 len: 23
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] LCP: LayerUp
Jan 23 19:35:13 OPNsense ppp: caught fatal signal TERM
Jan 23 19:35:13 OPNsense ppp: [opt3] IFACE: Close event
Jan 23 19:35:13 OPNsense ppp: [opt3] IPCP: Close event
Jan 23 19:35:13 OPNsense ppp: [opt3] IPV6CP: Close event
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] PAP: rec'd ACK #1 len: 5
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] LCP: authorization successful
Jan 23 19:35:13 OPNsense ppp: Shutdown sequence in progress, BundJoin() denied
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] link did not validate in bundle
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] LCP: parameter negotiation failed
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] LCP: state change Opened --> Stopping
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] LCP: SendTerminateReq #3
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] LCP: LayerDown
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] LCP: rec'd Terminate Ack #3 (Stopping)
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] LCP: state change Stopping --> Stopped
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] LCP: LayerFinish
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] PPPoE: connection closed
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] Link: DOWN event
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] Link: giving up after 0 reconnection attempts
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] LCP: Close event
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] LCP: state change Stopped --> Closed
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] LCP: Down event
Jan 23 19:35:13 OPNsense ppp: [opt3_link0] LCP: state change Closed --> Initial
Jan 23 19:35:15 OPNsense ppp: [opt3] Bundle: Shutdown
Jan 23 19:35:15 OPNsense ppp: [opt3_link0] Link: Shutdown
Jan 23 19:35:15 OPNsense ppp: process 76950 terminated
Jan 23 19:35:15 OPNsense ppp: Multi-link PPP daemon for FreeBSD
Jan 23 19:35:15 OPNsense ppp:
Jan 23 19:35:15 OPNsense ppp: process 18525 started, version 5.8 (root@sensey64 02:26 17-Jan-2017)
Jan 23 19:35:15 OPNsense ppp: web: web is not running
Jan 23 19:35:15 OPNsense ppp: [opt3] Bundle: Interface ng0 created
Jan 23 19:35:15 OPNsense ppp: [opt3_link0] Link: OPEN event
Jan 23 19:35:15 OPNsense ppp: [opt3_link0] LCP: Open event
Jan 23 19:35:15 OPNsense ppp: [opt3_link0] LCP: state change Initial --> Starting
Jan 23 19:35:15 OPNsense ppp: [opt3_link0] LCP: LayerStart
Jan 23 19:35:15 OPNsense ppp: [opt3_link0] PPPoE: Connecting to ''
Jan 23 19:35:18 OPNsense ppp: PPPoE: rec'd ACNAME "182"
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] PPPoE: connection successful
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] Link: UP event
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] LCP: Up event
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] LCP: state change Starting --> Req-Sent
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] LCP: SendConfigReq #1
Jan 23 19:35:18 OPNsense ppp: [opt3_link0]   PROTOCOMP
Jan 23 19:35:18 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:18 OPNsense ppp: [opt3_link0]   MAGICNUM 0x7049c571
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] LCP: rec'd Configure Request #55 (Req-Sent)
Jan 23 19:35:18 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:18 OPNsense ppp: [opt3_link0]   AUTHPROTO PAP
Jan 23 19:35:18 OPNsense ppp: [opt3_link0]   MAGICNUM 0x66ad8bf6
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] LCP: SendConfigAck #55
Jan 23 19:35:18 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:18 OPNsense ppp: [opt3_link0]   AUTHPROTO PAP
Jan 23 19:35:18 OPNsense ppp: [opt3_link0]   MAGICNUM 0x66ad8bf6
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] LCP: state change Req-Sent --> Ack-Sent
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] LCP: rec'd Configure Reject #1 (Ack-Sent)
Jan 23 19:35:18 OPNsense ppp: [opt3_link0]   PROTOCOMP
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] LCP: SendConfigReq #2
Jan 23 19:35:18 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:18 OPNsense ppp: [opt3_link0]   MAGICNUM 0x7049c571
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] LCP: rec'd Configure Ack #2 (Ack-Sent)
Jan 23 19:35:18 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:18 OPNsense ppp: [opt3_link0]   MAGICNUM 0x7049c571
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] LCP: state change Ack-Sent --> Opened
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] LCP: auth: peer wants PAP, I want nothing
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] PAP: using authname "stormy@isp"
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] PAP: sending REQUEST #1 len: 23
Jan 23 19:35:18 OPNsense ppp: [opt3_link0] LCP: LayerUp
Jan 23 19:35:19 OPNsense ppp: [opt3_link0] PAP: rec'd ACK #1 len: 5
Jan 23 19:35:19 OPNsense ppp: [opt3_link0] LCP: authorization successful
Jan 23 19:35:19 OPNsense ppp: [opt3_link0] Link: Matched action 'bundle "opt3" ""'
Jan 23 19:35:19 OPNsense ppp: [opt3_link0] Link: Join bundle "opt3"
Jan 23 19:35:19 OPNsense ppp: [opt3] Bundle: Status update: up 1 link, total bandwidth 64000 bps
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: Open event
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: state change Initial --> Starting
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: LayerStart
Jan 23 19:35:19 OPNsense ppp: [opt3] IPV6CP: Open event
Jan 23 19:35:19 OPNsense ppp: [opt3] IPV6CP: state change Initial --> Starting
Jan 23 19:35:19 OPNsense ppp: [opt3] IPV6CP: LayerStart
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: Up event
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: state change Starting --> Req-Sent
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: SendConfigReq #1
Jan 23 19:35:19 OPNsense ppp: [opt3]   IPADDR 0.0.0.0
Jan 23 19:35:19 OPNsense ppp: [opt3]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Jan 23 19:35:19 OPNsense ppp: [opt3] IPV6CP: Up event
Jan 23 19:35:19 OPNsense ppp: [opt3] IPV6CP: state change Starting --> Req-Sent
Jan 23 19:35:19 OPNsense ppp: [opt3] IPV6CP: SendConfigReq #1
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: rec'd Configure Reject #1 (Req-Sent)
Jan 23 19:35:19 OPNsense ppp: [opt3]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: SendConfigReq #2
Jan 23 19:35:19 OPNsense ppp: [opt3]   IPADDR 0.0.0.0
Jan 23 19:35:19 OPNsense ppp: [opt3_link0] LCP: rec'd Protocol Reject #115 (Opened)
Jan 23 19:35:19 OPNsense ppp: [opt3_link0] LCP: protocol IPV6CP was rejected
Jan 23 19:35:19 OPNsense ppp: [opt3] IPV6CP: protocol was rejected by peer
Jan 23 19:35:19 OPNsense ppp: [opt3] IPV6CP: state change Req-Sent --> Stopped
Jan 23 19:35:19 OPNsense ppp: [opt3] IPV6CP: LayerFinish
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: rec'd Configure Nak #2 (Req-Sent)
Jan 23 19:35:19 OPNsense ppp: [opt3]   IPADDR A.B.C.D
Jan 23 19:35:19 OPNsense ppp: [opt3]     A.B.C.D is OK
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: SendConfigReq #3
Jan 23 19:35:19 OPNsense ppp: [opt3]   IPADDR A.B.C.D
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: rec'd Configure Ack #3 (Req-Sent)
Jan 23 19:35:19 OPNsense ppp: [opt3]   IPADDR A.B.C.D
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: state change Req-Sent --> Ack-Rcvd
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: rec'd Configure Request #53 (Ack-Rcvd)
Jan 23 19:35:19 OPNsense ppp: [opt3]   IPADDR X.Y.Z.X
Jan 23 19:35:19 OPNsense ppp: [opt3]     X.Y.Z.X is OK
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: SendConfigAck #53
Jan 23 19:35:19 OPNsense ppp: [opt3]   IPADDR X.Y.Z.X
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: state change Ack-Rcvd --> Opened
Jan 23 19:35:19 OPNsense ppp: [opt3] IPCP: LayerUp
Jan 23 19:35:19 OPNsense ppp: [opt3]   A.B.C.D -> X.Y.Z.X
Jan 23 19:35:20 OPNsense ppp: [opt3] IFACE: Up event
Jan 23 19:35:20 OPNsense ppp: [opt3] IFACE: Rename interface ng0 to pppoe0
Jan 23 19:35:21 OPNsense ppp: caught fatal signal TERM
Jan 23 19:35:21 OPNsense ppp: [opt3] IFACE: Close event
Jan 23 19:35:21 OPNsense ppp: [opt3] IPCP: Close event
Jan 23 19:35:21 OPNsense ppp: [opt3] IPCP: state change Opened --> Closing
Jan 23 19:35:21 OPNsense ppp: [opt3] IPCP: SendTerminateReq #4
Jan 23 19:35:21 OPNsense ppp: [opt3] IPCP: LayerDown
Jan 23 19:35:21 OPNsense ppp: [opt3] IFACE: Delete route 0.0.0.0/0 X.Y.Z.X failed: No such process
Jan 23 19:35:21 OPNsense ppp: [opt3] IFACE: Down event
Jan 23 19:35:21 OPNsense ppp: [opt3] IFACE: Rename interface pppoe0 to pppoe0
Jan 23 19:35:21 OPNsense ppp: [opt3] IPV6CP: Close event
Jan 23 19:35:21 OPNsense ppp: [opt3] IPV6CP: state change Stopped --> Closed
Jan 23 19:35:21 OPNsense ppp: [opt3] IPCP: rec'd Terminate Ack #4 (Closing)
Jan 23 19:35:21 OPNsense ppp: [opt3] IPCP: state change Closing --> Closed
Jan 23 19:35:21 OPNsense ppp: [opt3] IPCP: LayerFinish
Jan 23 19:35:21 OPNsense ppp: [opt3] Bundle: No NCPs left. Closing links...
Jan 23 19:35:21 OPNsense ppp: [opt3] Bundle: closing link "opt3_link0"...
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] LCP: rec'd Terminate Request #116 (Opened)
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] LCP: state change Opened --> Stopping
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] Link: Leave bundle "opt3"
Jan 23 19:35:21 OPNsense ppp: [opt3] Bundle: Status update: up 0 links, total bandwidth 9600 bps
Jan 23 19:35:21 OPNsense ppp: [opt3] IPCP: Close event
Jan 23 19:35:21 OPNsense ppp: [opt3] IPV6CP: Close event
Jan 23 19:35:21 OPNsense ppp: [opt3] IPCP: Down event
Jan 23 19:35:21 OPNsense ppp: [opt3] IPCP: state change Closed --> Initial
Jan 23 19:35:21 OPNsense ppp: [opt3] IPV6CP: Down event
Jan 23 19:35:21 OPNsense ppp: [opt3] IPV6CP: state change Closed --> Initial
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] LCP: SendTerminateAck #3
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] LCP: LayerDown
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] PPPoE: connection closed
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] Link: DOWN event
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] Link: giving up after 0 reconnection attempts
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] LCP: Close event
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] LCP: state change Stopping --> Closing
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] LCP: Down event
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] LCP: LayerFinish
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] LCP: state change Closing --> Initial
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] Link: CLOSE event
Jan 23 19:35:21 OPNsense ppp: [opt3_link0] LCP: Close event
Jan 23 19:35:23 OPNsense ppp: [opt3] Bundle: Shutdown
Jan 23 19:35:23 OPNsense ppp: [opt3_link0] Link: Shutdown
Jan 23 19:35:23 OPNsense ppp: process 18525 terminated
Jan 23 19:35:23 OPNsense ppp: Multi-link PPP daemon for FreeBSD
Jan 23 19:35:23 OPNsense ppp:
Jan 23 19:35:23 OPNsense ppp: process 53377 started, version 5.8 (root@sensey64 02:26 17-Jan-2017)
Jan 23 19:35:23 OPNsense ppp: web: web is not running
Jan 23 19:35:23 OPNsense ppp: [opt3] Bundle: Interface ng0 created
Jan 23 19:35:23 OPNsense ppp: [opt3_link0] Link: OPEN event
Jan 23 19:35:23 OPNsense ppp: [opt3_link0] LCP: Open event
Jan 23 19:35:23 OPNsense ppp: [opt3_link0] LCP: state change Initial --> Starting
Jan 23 19:35:23 OPNsense ppp: [opt3_link0] LCP: LayerStart
Jan 23 19:35:23 OPNsense ppp: [opt3_link0] PPPoE: Connecting to ''
Jan 23 19:35:26 OPNsense ppp: PPPoE: rec'd ACNAME "182"
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] PPPoE: connection successful
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] Link: UP event
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] LCP: Up event
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] LCP: state change Starting --> Req-Sent
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] LCP: SendConfigReq #1
Jan 23 19:35:26 OPNsense ppp: [opt3_link0]   PROTOCOMP
Jan 23 19:35:26 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:26 OPNsense ppp: [opt3_link0]   MAGICNUM 0x4d140f5e
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] LCP: rec'd Configure Request #255 (Req-Sent)
Jan 23 19:35:26 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:26 OPNsense ppp: [opt3_link0]   AUTHPROTO PAP
Jan 23 19:35:26 OPNsense ppp: [opt3_link0]   MAGICNUM 0x6e59c8ea
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] LCP: SendConfigAck #255
Jan 23 19:35:26 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:26 OPNsense ppp: [opt3_link0]   AUTHPROTO PAP
Jan 23 19:35:26 OPNsense ppp: [opt3_link0]   MAGICNUM 0x6e59c8ea
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] LCP: state change Req-Sent --> Ack-Sent
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] LCP: rec'd Configure Reject #1 (Ack-Sent)
Jan 23 19:35:26 OPNsense ppp: [opt3_link0]   PROTOCOMP
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] LCP: SendConfigReq #2
Jan 23 19:35:26 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:26 OPNsense ppp: [opt3_link0]   MAGICNUM 0x4d140f5e
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] LCP: rec'd Configure Ack #2 (Ack-Sent)
Jan 23 19:35:26 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:26 OPNsense ppp: [opt3_link0]   MAGICNUM 0x4d140f5e
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] LCP: state change Ack-Sent --> Opened
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] LCP: auth: peer wants PAP, I want nothing
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] PAP: using authname "stormy@isp"
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] PAP: sending REQUEST #1 len: 23
Jan 23 19:35:26 OPNsense ppp: [opt3_link0] LCP: LayerUp
Jan 23 19:35:26 OPNsense ppp: caught fatal signal TERM
Jan 23 19:35:26 OPNsense ppp: [opt3] IFACE: Close event
Jan 23 19:35:26 OPNsense ppp: [opt3] IPCP: Close event
Jan 23 19:35:26 OPNsense ppp: [opt3] IPV6CP: Close event
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] PAP: rec'd ACK #1 len: 5
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] LCP: authorization successful
Jan 23 19:35:27 OPNsense ppp: Shutdown sequence in progress, BundJoin() denied
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] link did not validate in bundle
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] LCP: parameter negotiation failed
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] LCP: state change Opened --> Stopping
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] LCP: SendTerminateReq #3
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] LCP: LayerDown
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] LCP: rec'd Terminate Ack #3 (Stopping)
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] LCP: state change Stopping --> Stopped
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] LCP: LayerFinish
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] PPPoE: connection closed
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] Link: DOWN event
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] Link: giving up after 0 reconnection attempts
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] LCP: Close event
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] LCP: state change Stopped --> Closed
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] LCP: Down event
Jan 23 19:35:27 OPNsense ppp: [opt3_link0] LCP: state change Closed --> Initial
Jan 23 19:35:28 OPNsense ppp: [opt3] Bundle: Shutdown
Jan 23 19:35:28 OPNsense ppp: [opt3_link0] Link: Shutdown
Jan 23 19:35:28 OPNsense ppp: process 53377 terminated
Jan 23 19:35:29 OPNsense ppp: Multi-link PPP daemon for FreeBSD
Jan 23 19:35:29 OPNsense ppp:
Jan 23 19:35:29 OPNsense ppp: process 4541 started, version 5.8 (root@sensey64 02:26 17-Jan-2017)
Jan 23 19:35:29 OPNsense ppp: web: web is not running
Jan 23 19:35:29 OPNsense ppp: [opt3] Bundle: Interface ng0 created
Jan 23 19:35:29 OPNsense ppp: [opt3_link0] Link: OPEN event
Jan 23 19:35:29 OPNsense ppp: [opt3_link0] LCP: Open event
Jan 23 19:35:29 OPNsense ppp: [opt3_link0] LCP: state change Initial --> Starting
Jan 23 19:35:29 OPNsense ppp: [opt3_link0] LCP: LayerStart
Jan 23 19:35:29 OPNsense ppp: [opt3_link0] PPPoE: Connecting to ''
Jan 23 19:35:31 OPNsense ppp: PPPoE: rec'd ACNAME "182"
Jan 23 19:35:31 OPNsense ppp: [opt3_link0] PPPoE: connection successful
Jan 23 19:35:31 OPNsense ppp: [opt3_link0] Link: UP event
Jan 23 19:35:31 OPNsense ppp: [opt3_link0] LCP: Up event
Jan 23 19:35:31 OPNsense ppp: [opt3_link0] LCP: state change Starting --> Req-Sent
Jan 23 19:35:31 OPNsense ppp: [opt3_link0] LCP: SendConfigReq #1
Jan 23 19:35:31 OPNsense ppp: [opt3_link0]   PROTOCOMP
Jan 23 19:35:31 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:31 OPNsense ppp: [opt3_link0]   MAGICNUM 0xe9aa940e
Jan 23 19:35:31 OPNsense ppp: [opt3_link0] LCP: rec'd Configure Request #136 (Req-Sent)
Jan 23 19:35:31 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:31 OPNsense ppp: [opt3_link0]   AUTHPROTO PAP
Jan 23 19:35:31 OPNsense ppp: [opt3_link0]   MAGICNUM 0x3da87eb5
Jan 23 19:35:31 OPNsense ppp: [opt3_link0] LCP: SendConfigAck #136
Jan 23 19:35:31 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:31 OPNsense ppp: [opt3_link0]   AUTHPROTO PAP
Jan 23 19:35:31 OPNsense ppp: [opt3_link0]   MAGICNUM 0x3da87eb5
Jan 23 19:35:31 OPNsense ppp: [opt3_link0] LCP: state change Req-Sent --> Ack-Sent
Jan 23 19:35:31 OPNsense ppp: [opt3_link0] LCP: rec'd Configure Reject #1 (Ack-Sent)
Jan 23 19:35:31 OPNsense ppp: [opt3_link0]   PROTOCOMP
Jan 23 19:35:31 OPNsense ppp: [opt3_link0] LCP: SendConfigReq #2
Jan 23 19:35:31 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:31 OPNsense ppp: [opt3_link0]   MAGICNUM 0xe9aa940e
Jan 23 19:35:31 OPNsense ppp: [opt3_link0] LCP: rec'd Configure Ack #2 (Ack-Sent)
Jan 23 19:35:31 OPNsense ppp: [opt3_link0]   MRU 1492
Jan 23 19:35:31 OPNsense ppp: [opt3_link0]   MAGICNUM 0xe9aa940e
Jan 23 19:35:31 OPNsense ppp: [opt3_link0] LCP: state change Ack-Sent --> Opened
Jan 23 19:35:31 OPNsense ppp: [opt3_link0] LCP: auth: peer wants PAP, I want nothing
Jan 23 19:35:31 OPNsense ppp: [opt3_link0] PAP: using authname "stormy@isp"

with ips replaced A.B.C.D (ip isp assigns the opn), and X.Y.Z.X (ip isp's gateway).

Any ideas?

I've setup pppoe on one interface, nothing else is connected to the opn box, the pppoe succeeds only after a fresh reboot. As soon as clicking disconnect (or pulling network cable out), then clicking connect, and the session repeatdly fails to connect, for hours..

this is a sample log:

http://pastebin.com/bR48fySu

with ips replaced A.B.C.D (ip isp assigns the opn), and X.Y.Z.X (ip isp's gateway).

Any ideas?

post install, had to modify: /boot/loader.conf.local with the "vt" option, otherwise subsequent reboots hang the same way.  So, now my install uses the "vt" and all is fine.

Did the: set comconsole="efi"  at prompt, then boot, it comes up to the exact same screen, attempting EFI framebuffer at 800x600 and nothing after it.

second time added

Code Select Expand

set kern.vty="vt"

this time it booted all the way, then typed "installer" and it logged to the full-screen installer!!!  Great job!!

At this point I was curious, so did a 3rd test with ONLY the "vt" option, and that worked as well.  It may be that "comconsole=efi" is also good, but for this particular issue, the "vty=vt" was the thing that fixed it.

Thanks.

Reported as: https://github.com/opnsense/core/issues/1343

figured how to loopmount the images, and usb, need to use *44bsd*, see:

https://forum.opnsense.org/index.php?topic=4321.0

also, the boot issue is resolved by using opnsense 16.7, so this appears to be an issue w/17.1RC1

[44bsd]

Hi,

Having issues installing/booting, and trying now to mount the image, but for some reason it doesn't work on ubuntu 16.4TLS.

Solution below.

Code Select Expand

root@stormy-D600:~# ls -l OPNsense-17.1.r1-OpenSSL-vga-amd64.img
-rwxr-xr-x 1 root root 937420288 Jan 22 16:12 OPNsense-17.1.r1-OpenSSL-vga-amd64.img
root@stormy-D600:~# md5sum OPNsense-17.1.r1-OpenSSL-vga-amd64.img
b2b1dfba4073c865757f3491e6e35d1d  OPNsense-17.1.r1-OpenSSL-vga-amd64.img
root@stormy-D600:~# kpartx -va OPNsense-17.1.r1-OpenSSL-vga-amd64.img
add map loop0p1 (252:0): 0 1600 linear 7:0 3
add map loop0p2 (252:1): 0 126 linear 7:0 1603
add map loop0p3 (252:2): 0 1829168 linear 7:0 1729
root@stormy-D600:~# ll /dev/mapper/loop0p*
lrwxrwxrwx 1 root root 7 Jan 22 22:39 /dev/mapper/loop0p1 -> ../dm-0
lrwxrwxrwx 1 root root 7 Jan 22 22:39 /dev/mapper/loop0p2 -> ../dm-1
lrwxrwxrwx 1 root root 7 Jan 22 22:39 /dev/mapper/loop0p3 -> ../dm-2
root@stormy-D600:~# mount -o ro /dev/mapper/loop0p3 /mnt


At this point on the console getting this:

Code Select Expand

[  600.720245] ufs: You didn't specify the type of your ufs filesystem

               mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep|nextstep-cd|openstep ...

               >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old


trying "ls" gets:

Code Select Expand

root@stormy-D600:~# ls /mnt
ls: reading directory '/mnt': Input/output error


so, tried:

Code Select Expand

mount -o ro,ufstype=sun /dev/mapper/loop0p3 /mnt

no console error, but ls produces same error.

Trying "ufs2" fails:

Code Select Expand

root@stormy-D600:/var/log# mount -o ro,ufstype=ufs2 /dev/mapper/loop0p3 /mnt
mount: wrong fs type, bad option, bad superblock on /dev/mapper/loop0p3,
       missing codepage or helper program, or other error

       In some cases useful info is found in syslog - try
       dmesg | tail or so.


Finally, tried:

Code Select Expand

mount -o ro,ufstype=44bsd /dev/mapper/loop0p3 /mnt

able to mount and ls fine:

Code Select Expand

root@stormy-D600:~# ls /mnt
bin   conf       dev      etc   lib      media  proc    root  sys  usr
boot  COPYRIGHT  entropy  home  libexec  mnt    rescue  sbin  tmp  var


OK, from mount man page:

Code Select Expand

              44bsd  For filesystems created by a BSD-like system (NetBSD, FreeBSD, OpenBSD).

              ufs2   Used in FreeBSD 5.x supported as read-write.


just remember to select 44bsd :)

Thanks.

Hi there,

I'm new, and trying to navigate the website it APPEARS right now that there are 3 or maybe more seemingly different websites, as follows:

1) Main website: opnsense.org
2) Forum: forum.opnsense.org
3) docs: docs.opnsense.org

it appears that there is no way to CLICK from one to another and back to the other(s).. 

I think it helps a lot if from forum, u can click the main, docs, or even just main, then from docs can go to main, and not just trapped in docs forever..

Not suggesting a redesign, just an icon that links to main, or docs, or forum from each one, can even be the opnsense logo itself..

downloaded the latest "vga" 17.1 RC1 image (confirmed the MD5sum is OK), dd'd into a USB stick, put into a small Intel dedicated box, with 8GB / 128GB SSD, see the menu, choose "1", it prints a bunch of lines:

/boot/kernel/*.ko size ... at ...
then:
Booting...

with some info about EFI, but nothing changes after that.  The box has an HDMI connection that is connected to a monitor.

1) Does the "vga" version imply i must actually use a "VGA" connection?

2) How to debug this? 

Here is what I did so far:

Tried in more options to turn "Verbose", but get no more info.

The usb light is not blinking so i know it's not reading from it...

on last lines it says: Dimentions 800 x 600

but this TFT display is 7" and specs say 800x480, could that be it?

is there a way to boot with different resolution?

Took the USB and tried to mount it error must specify the ufs type (on ubunto), got it to work with:

mount -t ufs -o ro,ufstype=sun /dev/sdb3 /mnt

but then ls on /mnt returns many errors of incorrect size and Input/Output error...

also same errors happen when taking the OPNSense*.img and trying:

kpartx -va OPNs...

it gets the /dev/mapper/loop0p1 & loop0p2, but same errors when mounting p2..    how is it possible to loop mount the image?  Just to look around and see if there is anything about resolution.

meanwhile searching for a larger/standard monitor.

Stormy.

Thanks for the warm welcome. indeed test system looks cool!!

Regarding voip/#3, i think it will be OK, if IP can be "pinned" to a specific WAN, that is fine.

I think in my case I would need minimum 3, b/c of 2 WANS coming in, and 1 going out to LAN... although I may install on old laptop just for testing until can find a decent box.  Thanks!!!

Thanks much Franco!

1) by any chance is there some "emulator" one can connect and just see the GUI mock-up, without changing anything, just to see the pages/options?

2) I think no MAC routing on multiwan is not a big deal so long as IP can be routed, then one could ensure that MAC always gets that specific IP.

3) as for VOIP/IPSEC, I'm no expert on this topic, learning.  I do have a VOIP box that opens up a VPN tunnel to the provider, and when this thing was put on Multiwan it constantly reconnected, I'm guessing b/c tunnel broke due to changing IP.  This is a must-have, be able to put certain IPs/MACs (preferrably) to a certain WAN, which would fail over in case of outage...

4) I'm not too worried about detection not working 100% , it sounds like this framework is a lot more flexible to making changes, in other firmware based it's a lot more complex since it's all nvram, etc...

5) Regarding loadbalancing/failover, that sentence in doc "To combine Load Balancing with Failover you will have 2 or more WAN connections for Balancing purposes and 1 or more for Failover" almost makes me think i would need 3 WAN connects to have both balancing/failover, but maybe I'm being overly careful, and 2 WAN are enough to have both features...

6) BTw, in the h/w requirement/DOCS didn't see it specifically mention how many NICs are required, I'm assuming 2 are bare minimum.

OK, now need to figure out which box can be used for this experiment :)