16
17.7 Legacy Series / State Table Size
« on: October 28, 2017, 03:57:19 pm »
Is there a way to show this from the command line?
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
***GOT REQUEST TO UPGRADE: all***
Updating OPNsense repository catalogue...
OPNsense repository is up-to-date.
All repositories are up-to-date.
Updating OPNsense repository catalogue...
OPNsense repository is up-to-date.
All repositories are up-to-date.
Checking for upgrades (46 candidates): .......... done
Processing candidates (46 candidates): ........ done
Checking integrity... done (1 conflicting)
- py27-setuptools-32.1.0_1 conflicts with py27-setuptools27-32.1.0 on /usr/local/bin/easy_install
Cannot solve problem using SAT solver, trying another plan
Checking integrity... done (0 conflicting)
The following 38 package(s) will be affected (of 0 checked):
Installed packages to be REMOVED:
py27-sqlite3-2.7.13_7
opnsense-17.1.3
py27-setuptools27-32.1.0
New packages to be INSTALLED:
py27-setuptools: 32.1.0_1
Installed packages to be UPGRADED:
squid: 3.5.24 -> 3.5.24_2
png: 1.6.28 -> 1.6.29
pkgconf: 1.3.0_3 -> 1.3.0,1
php70-zlib: 7.0.16 -> 7.0.17
php70-xml: 7.0.16 -> 7.0.17
php70-sqlite3: 7.0.16 -> 7.0.17
php70-sockets: 7.0.16 -> 7.0.17
php70-simplexml: 7.0.16 -> 7.0.17
php70-session: 7.0.16 -> 7.0.17
php70-pdo: 7.0.16 -> 7.0.17
php70-openssl: 7.0.16 -> 7.0.17
php70-mcrypt: 7.0.16 -> 7.0.17
php70-ldap: 7.0.16 -> 7.0.17
php70-json: 7.0.16 -> 7.0.17
php70-hash: 7.0.16 -> 7.0.17
php70-gettext: 7.0.16 -> 7.0.17
php70-filter: 7.0.16 -> 7.0.17
php70-dom: 7.0.16 -> 7.0.17
php70-curl: 7.0.16 -> 7.0.17
php70-ctype: 7.0.16 -> 7.0.17
php70: 7.0.16 -> 7.0.17
opnsense-update: 17.1.3 -> 17.1.4
opnsense-lang: 17.1.3 -> 17.1.4
ntp: 4.2.8p9_4 -> 4.2.8p10_2
lzo2: 2.09 -> 2.10_1
Installed packages to be REINSTALLED:
py27-ujson-1.35 (direct dependency changed: py27-setuptools)
py27-requests-2.11.1 (direct dependency changed: py27-setuptools)
py27-pytz-2016.10,1 (direct dependency changed: py27-setuptools)
py27-netaddr-0.7.18 (direct dependency changed: py27-setuptools)
py27-MarkupSafe-1.0 (direct dependency changed: py27-setuptools)
py27-Jinja2-2.8 (direct dependency changed: py27-Babel)
py27-Babel-2.3.4 (direct dependency changed: py27-setuptools)
openvpn23-2.3.14_1 (options changed)
dnsmasq-2.76,1 (options changed)
Number of packages to be removed: 3
Number of packages to be installed: 1
Number of packages to be upgraded: 25
Number of packages to be reinstalled: 9
The operation will free 20 MiB.
pkg-static: Cannot delete vital package: opnsense!
pkg-static: If you are sure you want to remove opnsense,
pkg-static: unset the 'vital' flag with: pkg set -v 0 opnsense
Starting web GUI...done.
Generating RRD graphs...done.
***DONE***
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 173.48.255.1 173.48.255.2 35
10.10.0.1 255.255.255.255 10.10.0.5 10.10.0.6 25
10.10.0.4 255.255.255.252 On-link 10.10.0.6 281
10.10.0.6 255.255.255.255 On-link 10.10.0.6 281
10.10.0.7 255.255.255.255 On-link 10.10.0.6 281
127.0.0.0 255.0.0.0 On-link 127.0.0.1 331
127.0.0.1 255.255.255.255 On-link 127.0.0.1 331
127.255.255.255 255.255.255.255 On-link 127.0.0.1 331
173.48.255.0 255.255.255.0 On-link 173.48.255.2 291
173.48.255.2 255.255.255.255 On-link 173.48.255.2 291
173.48.255.255 255.255.255.255 On-link 173.48.255.2 291
192.168.1.0 255.255.255.0 10.10.0.5 10.10.0.6 25
224.0.0.0 240.0.0.0 On-link 127.0.0.1 331
224.0.0.0 240.0.0.0 On-link 173.48.255.2 291
224.0.0.0 240.0.0.0 On-link 10.10.0.6 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 331
255.255.255.255 255.255.255.255 On-link 173.48.255.2 291
255.255.255.255 255.255.255.255 On-link 10.10.0.6 281
===========================================================================
0) Logout 7) Ping host
1) Assign Interfaces 8) Shell
2) Set interface(s) IP address 9) pfTop
3) Reset the root password 10) Filter Logs
4) Reset to factory defaults 11) Restart web interface
5) Power off system 12) Upgrade from console
6) Reboot system 13) Restore a configuration
Enter an option: 7
Enter a host name or IP address: 192.168.1.163
PING 192.168.1.163 (192.168.1.163): 56 data bytes
64 bytes from 192.168.1.163: icmp_seq=0 ttl=128 time=3.764 ms
64 bytes from 192.168.1.163: icmp_seq=1 ttl=128 time=6.272 ms
64 bytes from 192.168.1.163: icmp_seq=2 ttl=128 time=3.188 ms
ov 30 19:18:00 openvpn[29096]: greg/173.48.255.2:51788 send_push_reply(): safe_cap=940
Nov 30 19:17:58 openvpn[29096]: greg/173.48.255.2:51788 MULTI_sva: pool returned IPv4=10.10.0.6, IPv6=(Not enabled)
Nov 30 19:17:58 openvpn[29096]: 173.48.255.2:51788 [greg] Peer Connection Initiated with [AF_INET]173.48.255.2:51788
Nov 30 19:17:58 openvpn: user 'greg' authenticated
Nov 30 18:29:44 openvpn[29096]: Initialization Sequence Completed
Nov 30 18:29:44 openvpn[29096]: UDPv4 link remote: [undef]
Nov 30 18:29:44 openvpn[29096]: UDPv4 link local (bound): [AF_INET]173.48.255.4:1194
Nov 30 18:29:43 openvpn[29096]: /usr/local/sbin/ovpn-linkup ovpns1 1500 1602 10.10.0.1 10.10.0.2 init
Nov 30 18:29:43 openvpn[29096]: /sbin/ifconfig ovpns1 10.10.0.1 10.10.0.2 mtu 1500 netmask 255.255.255.255 up
Nov 30 18:29:43 openvpn[29096]: do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Nov 30 18:29:43 openvpn[29096]: TUN/TAP device /dev/tun1 opened
Nov 30 18:29:43 openvpn[29096]: TUN/TAP device ovpns1 exists previously, keep at program end
Nov 30 18:29:43 openvpn[29096]: Control Channel Authentication: using '/var/etc/openvpn/server1.tls-auth' as a OpenVPN static key file
Nov 30 18:29:43 openvpn[29096]: WARNING: POTENTIALLY DANGEROUS OPTION --client-cert-not-required may accept clients which do not present a certificate
Nov 30 18:29:43 openvpn[29096]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Nov 30 18:29:43 openvpn[28838]: library versions: OpenSSL 1.0.2j 26 Sep 2016, LZO 2.09
Nov 30 18:29:43 openvpn[28838]: OpenVPN 2.3.13 amd64-portbld-freebsd10.3 [SSL (OpenSSL)] [LZO] [MH] [IPv6] built on Nov 14 2016
State changed to Creating...
Nov 30 1:48:53 PM: State changed to Disconnected
Nov 30 2:17:14 PM: State changed to Connecting
Nov 30 2:17:14 PM: Viscosity Windows 1.6.7 (1468)
Nov 30 2:17:14 PM: Running on Microsoft Windows 10 Pro
Nov 30 2:17:14 PM: Bringing up interface...
Nov 30 2:17:15 PM: Checking reachability status of connection...
Nov 30 2:17:15 PM: Connection is reachable. Starting connection attempt.
Nov 30 2:17:15 PM: OpenVPN 2.3.13 Windows-MSVC [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on Nov 4 2016
Nov 30 2:17:15 PM: library versions: OpenSSL 1.0.2j 26 Sep 2016, LZO 2.09
Nov 30 2:17:53 PM: Control Channel Authentication: using 'C:\Program Files\Common Files\Viscosity\OpenVPNConfig\greg\1\ta.key' as a OpenVPN static key file
Nov 30 2:17:53 PM: UDPv4 link local (bound): [undef]
Nov 30 2:17:53 PM: UDPv4 link remote: [AF_INET]173.48.255.4:1194
Nov 30 2:17:53 PM: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Nov 30 2:17:54 PM: [SSLVPN Server Certificate] Peer Connection Initiated with [AF_INET]173.48.255.4:1194
Nov 30 2:17:56 PM: do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Nov 30 2:17:56 PM: open_tun, tt->ipv6=0
Nov 30 2:17:56 PM: TAP-WIN32 device [My SSL VPN Server] opened: \\.\Global\{4C29BFA5-6B43-42BF-8C0E-8035685E30D2}.tap
Nov 30 2:17:56 PM: Notified TAP-Windows driver to set a DHCP IP/netmask of 10.10.0.6/255.255.255.252 on interface {4C29BFA5-6B43-42BF-8C0E-8035685E30D2} [DHCP-serv: 10.10.0.5, lease-time: 31536000]
Nov 30 2:17:56 PM: Successful ARP Flush on interface [38] {4C29BFA5-6B43-42BF-8C0E-8035685E30D2}
Nov 30 2:18:01 PM: Initialization Sequence Completed
Nov 30 2:18:02 PM: WARNING: Split DNS is being used however no DNS domains are present. The DNS server/s for this connection may not be used. For more information please see: https://www.sparklabs.com/support/kb/article/warning-split-dns-is-being-used-however-no-dns-domains-are-present/
Server - 173.48.255.1:53; Lookup Type - Any; Domains - fios-router.home.