Messages

1

22.1 Legacy Series / Re: IPv6 track interface often fails after temporary DSL line failure

« on: May 31, 2022, 05:02:11 pm »

@marjohn56
Any hint how to enable debug logging for dhcp6c?

thanks, Till

2

22.1 Legacy Series / Re: IPv6 track interface often fails after temporary DSL line failure

« on: May 04, 2022, 06:18:09 pm »

But in that case I am well covered with IPv6ICMP and that is obviously not the reason for my problem

3

22.1 Legacy Series / Re: IPv6 track interface often fails after temporary DSL line failure

« on: May 04, 2022, 05:47:18 pm »

The rules should be autogenerated in floating section, aren't they?
At this moment I don't know where the rules come from...

Indeed they are, forgive my blindness. Was looking in WAN only.

4

22.1 Legacy Series / Re: IPv6 track interface often fails after temporary DSL line failure

« on: May 04, 2022, 05:26:39 pm »

I've got only the defaults (IPv6 RFC4890 requirements (ICMP)) and additionally ICMPv6 echo service requests...

Is there any quick way of applying RFC4890 compliant rules I missed? Like a predefined set of rules or a parameter?

5

22.1 Legacy Series / Re: IPv6 track interface often fails after temporary DSL line failure

« on: May 04, 2022, 02:29:21 pm »

This is what I have in terms of ICMP6 on WAN.
Is that sufficient?

6

22.1 Legacy Series / Re: [22.1.6][unbound] host overide alias doesn't work

« on: May 04, 2022, 02:06:35 pm »

OMG - now I got it how it works. I would have never guessed that. Thanks for clarifying it @mnaim

7

22.1 Legacy Series / Re: IPv6 track interface often fails after temporary DSL line failure

« on: May 04, 2022, 10:09:09 am »

Ok thanks. I’ll give it a try.

8

22.1 Legacy Series / Re: IPv6 track interface often fails after temporary DSL line failure

« on: May 04, 2022, 09:22:44 am »

Hmm. How would explain why it only happens occasionally and only when the line breaks? Again, reloading the PPPoE  interface or restarting everything in order ( modem first, line up, then firewall) will establish a proper Connection and I get IPv6 on all VLANs via track interface.
Till

9

22.1 Legacy Series / IPv6 track interface often fails after temporary DSL line failure

« on: May 03, 2022, 12:03:27 pm »

Team,
this is a problem I have for more than a year, so it is not specific to the current version. Nevertheless I wonder how to either fix it or work around it.
My setup is an external VDSL modem with OPNSense initiating a PPPoE session on it.
Unfortunately, the line is suffering from temporary instabilities. So it may break down and OPNsense re-establishes the connection a minute later. The problem I have is that in those cases, IPv6 adress assignment via track interface often fails. I assume this i some kind of timing problem. I can manually fiy this by reloading the PPPoE  via Interfaces->Overview->WAN-> PPPoE reload.
However this is a cumbersome manual procedure.
Any ideas?

thanks, Till

10

22.1 Legacy Series / Re: [22.1.6][unbound] host overide alias doesn't work

« on: May 02, 2022, 11:02:26 pm »

No. But based on the reference links you have it seems to be a bug. So I wait for the fix.

11

22.1 Legacy Series / [Solved][22.1.6][unbound] host overide alias doesn't work

« on: April 29, 2022, 03:18:31 pm »

Hi,
just realized - no matter what I put into the alias dialog, nothing shows up under host override -> alias afterwards. The list stays empty.
Is this a bug?

thanks! Till

12

Zenarmor (Sensei) / Re: Sensei on OPNsense - Application based filtering

« on: March 10, 2022, 08:02:01 pm »

Why wouldn’t you not run it on the LAN Interface like recommended?

13

22.1 Legacy Series / Re: Solved: Update to 22.1 not working

« on: February 01, 2022, 10:06:50 am »

I can confirm that rebooting before update solves the problem. Update went smooth. So far no issues.

14

22.1 Legacy Series / Re: Solved: Update to 22.1 not working

« on: February 01, 2022, 08:35:52 am »

Hmm. Mine isn’t running on APU and I don’t really see how this could be related. I assume it’s more related to the reboot you did before. I’ll give that a try today in my maintenance window.

15

22.1 Legacy Series / Re: Update to 22.1 not working

« on: January 31, 2022, 09:16:46 pm »

I see exactly the same here right now. It's running for hours now without any progress.