Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - tillsense

#226
Hi Franco,

in post 5 i had not seen your second commit yet ;) as far as the checkbox is concerned it could be similar to the activation of the local cache by checkbox.

But the implementation of https://github.com/opnsense/core/pull/1328 should have prio for backend that's the right way :)



cheers till

-------------------------------------------
OPNsense 17.1.r-amd64
FreeBSD 11.0-RELEASE-p7
OpenSSL 1.0.2j 26 Sep 2016
#227
Hi Ad,

i can confirm this https://forum.opnsense.org/index.php?topic=4235.0 under 17.1 there must still be a problem.
(cpu last is also there again)

cheers till


-------------------------------------------
OPNsense 17.1.b_105-amd64
FreeBSD 11.0-RELEASE-p6
OpenSSL 1.0.2j 26 Sep 2016
#228
Hallo zusammen,

sehr komplexes Thema...

QuoteGemäß der Speicheranzeige im Dashboard dümpelt meine OPNSense immer um 100 MB herum. Beim der OPNSene-Update wird es dann auch mal 230 MB. Scheint so, als wenn Squid keinen Cache im Speicher nutzt.

Vorsicht! "cache_mem" (Memory Cache) bestimmt allein den Speicher, den Squid zusätzlich an Hauptspeicher(RAM) für bestimmte Prozesse (Link von Franco) in Anspruch nimmt (Reserviert). Der tatsächliche Gesamtspeicherbedarf des RAM hängt von vielen weiteren Faktoren ab. Nimm cache_mem * 3 und es sollte nicht weh tun. Im Nano Fall (/var MFS) würden jetzt hier noch die 100 MB (Cache size) minimum im RAM hinzukommen. Das heißt wir sind bei 256*3+100=868 MB Ram. Im schlechtesten Szenario würde deine Karre kein Zuck mehr machen.

Erfahrungsgemäß sollte 3*cache_mem nie cache_size überschreiten. In deinem Fall würde ich max cache_mem=16 (Memory Cache) und cache_dir=100 (Cache Size) für den Anfang setzen.

gruß till

-------------------------------------------
OPNsense 17.1.b_105-amd64
FreeBSD 11.0-RELEASE-p6
OpenSSL 1.0.2j 26 Sep 2016
#229
Hi Franco,

i looked at this and i think this should be 0. For 0 is a good config the two lines to write off but 1 is 1 MB for cache_mem. Or maybe better an checkbox? The used full help is also misleading here.


cheers till

-------------------------------------------
OPNsense 17.1.b_103-amd64
FreeBSD 11.0-RELEASE-p6
OpenSSL 1.0.2j 26 Sep 2016

#230
16.7 Legacy Series / Re: 16.7.8 update broke lightsquid
January 08, 2017, 01:02:58 PM
Ok,

the Module p5-CGI is needed for the lightsquid web interface. Should be configured as a dependency at lightsquid?

(e.g. amd64 / 17.1 )
pkg add -f http://pkg.freebsd.org/freebsd:11:x86:64/latest/All/p5-CGI.pm-3.63_1,1.txz


cheers till

------------------------------------------
OPNsense 17.1.b_97-amd64
FreeBSD 11.0-RELEASE-p6
OpenSSL 1.0.2j 26 Sep 2016
#231
17.1 Legacy Series / Re: 17.1 development milestones
January 07, 2017, 08:21:07 PM
Hi Franco,

when do you think you can publish the first rc installation packages (amd64)?

cheers till

-------------------------------------
OPNsense 17.1.b_97-amd64
FreeBSD 11.0-RELEASE-p6
OpenSSL 1.0.2j 26 Sep 2016
#232
hi franco,

yes i think that would be a good preset!

cheers till

-------------------------------------
OPNsense 17.1.b_94-amd64
FreeBSD 11.0-RELEASE-p6
OpenSSL 1.0.2j 26 Sep 2016
#233
config screen:
#234
UPD 06/2023 - Official PC Engines APU platform EndOfLife: https://www.pcengines.ch/eol.htm


UPD 01/2023 - PC Engines has discontinued its sponsorship for open-source firmware. Please read 3mdeb Announcement here:
https://forum.opnsense.org/index.php?topic=4200.msg156011#msg156011


[Manufacturer]
https://www.pcengines.ch/

[Firmware and Announcements]
https://3mdeb.com/open-source-firmware/pcengines/
https://pcengines.github.io/blog/
https://pcengines.github.io/

[OPNsense Requirements]
flashrom - Install on console with 'pkg install -y flashrom'

[OPNsense Optional]
os-dmidecode - Install from GUI (Plugin) - Information on Dashboard

[Firmware Issues]
https://github.com/pcengines/apu2-documentation/issues

[Firmware flashing]
https://github.com/pcengines/apu2-documentation/blob/master/docs/firmware_flashing.md

[Benchmarking]
https://github.com/ocochard/netbenches
https://ipng.ch/s/articles/2021/07/19/pcengines-apu6.html
https://wejn.org/2021/07/loadtesting-bunch-of-routers/

[Top FAQ]

What is APU7 - Variant with 2.5GbE i225 NIC's.

What is APU6 - https://www.pcengines.ch/apu6b4.htm.

What is APU5 - Based on http://www.pcengines.info/ APU5 is a customer specific board for mobile communications. 

Where is 3mdeb - https://3mdeb.com/ is the coreboot licensed consulting services provider for pcengines.

Where is ocochard - Based on https://twitter.com/ocochardlabbe he is Senior software engineer in test at Netflix, founder of FreeNAS and BSD Router Project, FreeBSD ports committer.

[More Sources OLD!]
https://review.coreboot.org/#/c/14138/
http://pcengines.ch/howto.htm#bios



cheers till





[Changelog]

21.07.22 - Add APU7
03.03.22 - Upd. URL
25.07.21 - Upd. URL
04.02.21 - Upd. FAQ
12.12.20 - Upd. FAQ
03.10.20 - Add APU6
...

03.01.17 - Here's the first post of all:


The core development for a new APU2 BIOS seems to be recovering again.

Hopefully finally with the promised ECC RAM!


#235
Hi Ad,

that was the problem (/var/log/flowd.log*). Thanks for the quick help!

cheers till

-------------------------------------
OPNsense 17.1.b_86-amd64
FreeBSD 11.0-RELEASE-p6
OpenSSL 1.0.2j 26 Sep 2016
#236
Hi Ad,

the file (command)

/usr/local/bin/python2.7
/usr/local/opnsense/scripts/netflow/flowd_aggregate.py


caused since the changes quite high cpu last (eg 46.39% idle client usage)

cheers till

-------------------------------------
OPNsense 17.1.b_82-amd64
FreeBSD 11.0-RELEASE-p6
OpenSSL 1.0.2j 26 Sep 2016
#237
17.1 Legacy Series / Happy New Year
January 02, 2017, 06:20:08 PM
Happy New Year,

All!

cheers till

-------------------------------------
OPNsense 17.1.b_82-amd64
FreeBSD 11.0-RELEASE-p6
OpenSSL 1.0.2j 26 Sep 2016
#238
German - Deutsch / Re: Zugang zum Webinterface des Modems
December 31, 2016, 06:07:48 PM
Was sagt denn das Firewall Log in dem Moment des Zugriffs auf dein Modem?
#239
17.1 Legacy Series / Re: [SOLVED] flashrom in 17.1
December 31, 2016, 05:11:31 PM
Hi Franco,

wow that was fast! thanks!

cheers till

-------------------------------------
OPNsense 17.1.b_74-amd64
FreeBSD 11.0-RELEASE-p6
OpenSSL 1.0.2j 26 Sep 2016
#240
German - Deutsch / Re: Zugang zum Webinterface des Modems
December 31, 2016, 05:04:52 PM
@georg

QuoteHat jemand die Lösung dafür?

Details wären sehr hilfreich (schnittstellen / ip / firewall/ was hast du genau gemacht?) Gehen tut es auf alle Fälle.

gruß till