Messages

16

17.1 Legacy Series / Re: Kernel Panics

« on: August 25, 2017, 10:35:44 am »

Seems like i'm having the similar issue

17

17.7 Legacy Series / Re: Kernel Panic

« on: August 25, 2017, 10:09:24 am »

LAN adapter / PCI = DGE-528T Gigabit Ethernet Adapter
WAN adapter / onboard = RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller

is any of these caused the issue?

18

17.7 Legacy Series / Kernel Panic

« on: August 21, 2017, 07:55:02 am »

Hi everyone,

My machine keep on crash. It just stay active for 2-3 days then crash. Not really sure what happened.

Machine information:

OPNsense 17.7-i386
FreeBSD 11.0-RELEASE-p11
OpenSSL 1.0.2l 25 May 2017
Intel(R) Core(TM)2 Duo CPU E7500 @ 2.93GHz (2 cores)

Log :

Fatal double fault:
eip = 0xc0e8f4b8
esp = 0xed7cdfb0
ebp = 0xed7ce010
cpuid = 0; apic id = 00
panic: double fault
cpuid = 0
KDB: stack backtrace:
db_trace_self_wrapper(c188474d,ff,1,2,1,...) at db_trace_self_wrapper+0x2a/frame 0xc1d7e328
kdb_backtrace(c1a6058d,0,c1a57493,c1d7e3e4,0,...) at kdb_backtrace+0x2d/frame 0xc1d7e390
vpanic(c1a57493,c1d7e3e4,c1d7e3e4,c1d7e3ec,c14927e6,...) at vpanic+0x114/frame 0xc1d7e3c4
panic(c1a57493,0,0,0,0,...) at panic+0x1b/frame 0xc1d7e3d8
dblfault_handler() at dblfault_handler+0xa6/frame 0xc1d7e3d8
--- trap 0x17, eip = 0xc0e8f4b8, esp = 0xed7cdfb0, ebp = 0xed7ce010 ---
cpu_search_lowest(c1d5f1b0,ed7ce038,ffffffff,0,c9008fa0,...) at cpu_search_lowest+0x18/frame 0xed7ce010
sched_pickcpu(0,2c,7fffffff,0,b6,...) at sched_pickcpu+0x299/frame 0xed7ce064
sched_add(ca05c000,0,ed7ce104,2710,962b1e18) at sched_add+0x3e/frame 0xed7ce0a0
sched_wakeup(ca05c000,0,ca05c000,ed7ce104,c0eb9dd5,...) at sched_wakeup+0x17c/frame 0xed7ce0c8
setrunnable(ca05c000,0,ed7ce198,0,1,ca05c000) at setrunnable+0x5d/frame 0xed7ce0dc
sleepq_resume_thread(0,0,c1885a9a,360,1,...) at sleepq_resume_thread+0xe5/frame 0xed7ce104
sleepq_signal(ca0b3280,0,0,0,ca0b3280,...) at sleepq_signal+0x9d/frame 0xed7ce130
wakeup_one(ca0b3280) at wakeup_one+0x33/frame 0xed7ce150
taskqueue_thread_enqueue(ca1045c8,c1d5f1c4,ed7ce198,c1d5f1b0,ed7ce190,...) at taskqueue_thread_enqueue+0x11/frame 0xed7ce15c
taskqueue_enqueue_locked(ed7ce1a8,c0e6a68b,ed7ce1c0,c1b5ea7c,8000efd6,...) at taskqueue_enqueue_locked+0x17e/frame 0xed7ce18c
taskqueue_enqueue(ca0b3280,ca1045cc,ed7ce258,c0e753dc,0,...) at taskqueue_enqueue+0xfe/frame 0xed7ce1b8
dummynet(0,ffffffff,5af38,57ecc9c6,1746206d,...) at dummynet+0x1b/frame 0xed7ce1c8
softclock_call_cc(1,31027e56,4b837274,0,41780a,...) at softclock_call_cc+0x13c/frame 0xed7ce258
callout_process(17461af2,5af38,ed7ce338,c149b080,0,...) at callout_process+0x267/frame 0xed7ce2d8
handleevents(0,e4359c80,ed7ce384,c149b69f,0,...) at handleevents+0x1ee/frame 0xed7ce328
timercb(c1db6600,0,0,0,e4f51bc3,...) at timercb+0xcf/frame 0xed7ce378
lapic_handle_timer(ed7ce3a4) at lapic_handle_timer+0x7c/frame 0xed7ce398
Xtimerint() at Xtimerint+0x2e/frame 0xed7ce398
--- interrupt, eip = 0xc056a33d, esp = 0xed7ce3e4, ebp = 0xed7ce548 ---
_libmd_SHA256_Transform(ed7cea18,c1a80d78,18,ed7ce610,c1c1ed80,...) at _libmd_SHA256_Transform+0x1cd/frame 0xed7ce548
_libmd_SHA256_Final(ed7ce610,ed7ce9d0) at _libmd_SHA256_Final+0xb0/frame 0xed7ce568
randomdev_hash_finish(ed7ce9d0,ed7ce610,20,0,0,...) at randomdev_hash_finish+0x18/frame 0xed7ce578
random_fortuna_pre_read(0,ed7ceb00,3,0,8,...) at random_fortuna_pre_read+0x1a1/frame 0xed7cead8
read_random(ed7cec40,100,2c,7fffffff,0,...) at read_random+0x26/frame 0xed7cec00
arc4rand(ed7ced6c,4,0,1102,ed7cee28,...) at arc4rand+0x74/frame 0xed7ced58
arc4random(ed7cedf8,ccc71410,2,ccc71410,ed7cedd8,...) at arc4random+0x21/frame 0xed7ced70
pf_get_translation(ed7cf150,c9334e00,14,2,c92b3b00,...) at pf_get_translation+0x479/frame 0xed7cee28
pf_test_rule(2,c92b3b00,c9334e00,14,ed7cf150,...) at pf_test_rule+0x31e/frame 0xed7cf100
pf_test(2,c9031400,ed7cf254,0,0,...) at pf_test+0x855/frame 0xed7cf208
pf_check_out(0,ed7cf254,c9031400,2,0,...) at pf_check_out+0x29/frame 0xed7cf228
pfil_run_hooks(c1dc5954,ed7cf32c,c9031400,2,0,...) at pfil_run_hooks+0x88/frame 0xed7cf288
ip_output(c9334e00,0,ed7cf3c8,1,0,...) at ip_output+0x2b2/frame 0xed7cf378
ip_forward(c9334e00,0,0,1,0,...) at ip_forward+0x429/frame 0xed7cf408
ip_input(c9334e00,0,c915e950,c8bcd084,cb226280,...) at ip_input+0x7c6/frame 0xed7cf474
netisr_dispatch_src(1,0,c9334e00) at netisr_dispatch_src+0xd0/frame 0xed7cf4bc
netisr_dispatch(1,c9334e00,ed7cf4fc,c20e9a79,c263b1c0,...) at netisr_dispatch+0x20/frame 0xed7cf4d0
ether_demux(c8ae8000,c9334e00,ca0b2b00,0,2,...) at ether_demux+0x131/frame 0xed7cf4fc
ng_ether_rcv_upper(ca0b2b00,c9478f80,0,1,0,...) at ng_ether_rcv_upper+0x93/frame 0xed7cf518
ng_apply_item(0,0,4,c20e9d84,0,...) at ng_apply_item+0x121/frame 0xed7cf570
ng_snd_item(c9478f80,0,ca0b2b80,0,11,...) at ng_snd_item+0x3fd/frame 0xed7cf5a0
ng_netflow_rcvdata(ca0b2a80,c9478f80,0,0,1,...) at ng_netflow_rcvdata+0x64c/frame 0xed7cf61c
ng_apply_item(0,0,4,c20e9d84,0,...) at ng_apply_item+0x121/frame 0xed7cf674
ng_snd_item(c9478f80,0,ca0b2a00,0,c8ae8000,...) at ng_snd_item+0x3fd/frame 0xed7cf6a4
ng_ether_input(c8ae8000,ed7cf6ec,4b,0,ed7cf720,...) at ng_ether_input+0x66/frame 0xed7cf6c8
ether_nh_input(c9334e00,c0ef6fd2,f39d9800,c9334e58,4b,...) at ether_nh_input+0x2ce/frame 0xed7cf718
netisr_dispatch_src(5,0,c9334e00) at netisr_dispatch_src+0xd0/frame 0xed7cf760
netisr_dispatch(5,c9334e00,ed7cf7f0,ed7cf7d0,c0936073,...) at netisr_dispatch+0x20/frame 0xed7cf774
ether_input(c8ae8000,c9334e00,ed7cf7a0,ed7cf7f0,c914a600,...) at ether_input+0x2a/frame 0xed7cf788
netmap_send_up(1,1,c963f940,1f0,3ff,...) at netmap_send_up+0x33/frame 0xed7cf7d0
netmap_txsync_to_host_compat(c963f940,2,c0e92148,c1d4faac,0,...) at netmap_txsync_to_host_compat+0x8c/frame 0xed7cf828
netmap_ioctl(c8712700,20006994,ed7cfc70,3,ca14c9c0,...) at netmap_ioctl+0x66c/frame 0xed7cfa94
devfs_ioctl_f(c9092a48,20006994,ed7cfc70,c8f9f500,ca14c9c0,...) at devfs_ioctl_f+0x145/frame 0xed7cfacc
kern_ioctl(ca14c9c0,8,20006994,ed7cfc70,4,...) at kern_ioctl+0x2db/frame 0xed7cfb10
sys_ioctl(ca14c9c0,ed7cfc68,ed7cfbe8,c0e62a1f,46,...) at sys_ioctl+0x119/frame 0xed7cfbd0
syscall(ed7cfca8) at syscall+0x678/frame 0xed7cfc9c
Xint0x80_syscall() at Xint0x80_syscall+0x2e/frame 0xed7cfc9c
--- syscall (54, FreeBSD ELF32, sys_ioctl), eip = 0x23b308b3, esp = 0xbbbf9eb4, ebp = 0xbbbfa744 ---
KDB: enter: panic

19

17.1 Legacy Series / Re: Intrusion Detection

« on: August 04, 2017, 04:56:32 am »

Happened to me also but after change to Aho-Corasick, everything back to normal.

20

17.1 Legacy Series / Re: Remote Logging : Not auto start after reboot

« on: August 03, 2017, 11:50:27 am »

The remote server is WAN type with static ip and specific port which both is allowed at the firewall rule.

p/s: thinking of using monit to run that function

21

17.1 Legacy Series / Remote Logging : Not auto start after reboot

« on: August 02, 2017, 03:45:35 am »

Hi everyone,

How do i go about making the remote logging service runs automatically each time after reboot. Currently i need to click "Save" everytime after reboot, only then i get the logging at remote server.

Here is my build information :

OPNsense 17.1.11_1-i386
FreeBSD 11.0-RELEASE-p10
OpenSSL 1.0.2l 25 May 2017

p/s: the logging service in opnsense runs (i can see the log in the portal) only it didn't send to the remote server that i've setup.

22

16.7 Legacy Series / Re: Torrent Blocking - P2p Clients

« on: July 21, 2017, 09:51:41 pm »

Try suricata and enable et p2p with drop action

23

16.7 Legacy Series / Traffic Graph : IN speed not showing

« on: July 21, 2017, 07:14:23 am »

Hi everyone,

Need some help over here. Having issue with the graph. It didn't show the "IN" value.  Details is my machine :

    re1@pci0:4:1:0: class=0x020000 card=0x43001186 chip=0x43001186 rev=0x10 hdr=0x00
    vendor     = 'D-Link System Inc'
    device     = 'DGE-528T Gigabit Ethernet Adapter'
    class      = network
    subclass   = ethernet

   OPNsense 16.7.14_2-i386
   FreeBSD 10.3-RELEASE-p14
   OpenSSL 1.0.2j 26 Sep 2016

Afraid of GUI issue, i tested to open the portal via Chrome, IE & Firefox but not to avail. Could it be kernel issue? Btw, the ip is on DHCP.

24

16.7 Legacy Series / Re: Network Insight : IP Address Not Showing In The Report

« on: July 21, 2017, 06:40:14 am »

Figured out it only happen on Firefox. Tried with Chrome & IE and it's able to show the ip address

25

16.7 Legacy Series / [SOLVED] Network Insight : IP Address Not Showing In The Report

« on: July 21, 2017, 05:49:02 am »

Hi everyone,

Here is the thing, my "Details" page not showing the IP addresses that has been captured.

flowd-reader /var/log/flowd.log has shown the record was there.

 ls -lah /var/log/flowd* shows :

-rw-------  1 root  wheel    12M Jul 21 11:39 /var/log/flowd.log
-rw-------  1 root  wheel    11M Jul 21 10:55 /var/log/flowd.log.000001
-rw-------  1 root  wheel    11M Jul 21 10:17 /var/log/flowd.log.000002
-rw-------  1 root  wheel    11M Jul 21 09:22 /var/log/flowd.log.000003

The graph is plotting accordingly even the top usage section able to show the top 25 ip address for both LAN & WAN.

How do i go about it? This is my machine information.

OPNsense 16.7.14_2-i386
FreeBSD 10.3-RELEASE-p14
OpenSSL 1.0.2j 26 Sep 2016

26

16.7 Legacy Series / Re: PPPoE : Maxsessions exceeded error

« on: July 20, 2017, 07:05:39 pm »

Unfortunately, it was my ISP. They're using 1:1 tagging between my account and the mac address of the router. By instructing them to release the old MAC address from their record, all went well.

27

16.7 Legacy Series / [SOLVED] PPPoE : Maxsessions exceeded error

« on: July 19, 2017, 07:15:47 pm »

Need some help over here.

This is my 3rd box (box C). The other 2 have no issue at all (Box A & B). Currently i'm trying to configure box C as a replacement for the box A. The only issue i'm having right now is i keep getting this error :

Jul 19 19:09:53   ppp: [wan_link0] LCP: state change Opened --> Stopping
Jul 19 19:09:53   ppp: [wan_link0] LCP: parameter negotiation failed
Jul 19 19:09:53   ppp: [wan_link0] LCP: authorization failed
Jul 19 19:09:53   ppp: [wan_link0] MESG: MaxSessions exceeded
Jul 19 19:09:53   ppp: [wan_link0] PAP: rec'd NAK #1 len: 25
Jul 19 19:09:53   ppp: [wan_link0] LCP: LayerUp
Jul 19 19:09:53   ppp: [wan_link0] PAP: sending REQUEST #1 len: 31
Jul 19 19:09:53   ppp: [wan_link0] PAP: using authname "xxx123@123xxx"
Jul 19 19:09:53   ppp: [wan_link0] LCP: auth: peer wants PAP, I want nothing
Jul 19 19:09:53   ppp: [wan_link0] LCP: state change Ack-Sent --> Opened
Jul 19 19:09:53   ppp: [wan_link0] MAGICNUM 0xc56c6668
Jul 19 19:09:53   ppp: [wan_link0] MRU 1492
Jul 19 19:09:53   ppp: [wan_link0] PROTOCOMP
Jul 19 19:09:53   ppp: [wan_link0] LCP: rec'd Configure Ack #171 (Ack-Sent)
Jul 19 19:09:53   ppp: [wan_link0] LCP: state change Req-Sent --> Ack-Sent
Jul 19 19:09:53   ppp: [wan_link0] MAGICNUM 0x7a941bc5
Jul 19 19:09:53   ppp: [wan_link0] AUTHPROTO PAP
Jul 19 19:09:53   ppp: [wan_link0] MRU 1492
Jul 19 19:09:53   ppp: [wan_link0] LCP: SendConfigAck #233
Jul 19 19:09:53   ppp: [wan_link0] MAGICNUM 0x7a941bc5
Jul 19 19:09:53   ppp: [wan_link0] AUTHPROTO PAP
Jul 19 19:09:53   ppp: [wan_link0] MRU 1492
Jul 19 19:09:53   ppp: [wan_link0] LCP: rec'd Configure Request #233 (Req-Sent)
Jul 19 19:09:53   ppp: [wan_link0] MAGICNUM 0xc56c6668
Jul 19 19:09:53   ppp: [wan_link0] MRU 1492
Jul 19 19:09:53   ppp: [wan_link0] PROTOCOMP
Jul 19 19:09:53   ppp: [wan_link0] LCP: SendConfigReq #171
Jul 19 19:09:53   ppp: [wan_link0] LCP: state change Starting --> Req-Sent
Jul 19 19:09:53   ppp: [wan_link0] LCP: Up event
Jul 19 19:09:53   ppp: [wan_link0] Link: UP event
Jul 19 19:09:53   ppp: [wan_link0] PPPoE: connection successful
Jul 19 19:09:53   ppp: PPPoE: rec'd ACNAME "imse02.klg_klj-re0"
Jul 19 19:09:53   ppp: [wan_link0] PPPoE: Connecting to '1'
Jul 19 19:09:53   ppp: [wan_link0] Link: reconnection attempt 145
Jul 19 19:09:52   ppp: [wan_link0] Link: reconnection attempt 145 in 1 seconds
Jul 19 19:09:52   ppp: [wan_link0] LCP: state change Stopping --> Starting
Jul 19 19:09:52   ppp: [wan_link0] LCP: Down event
Jul 19 19:09:52   ppp: [wan_link0] Link: DOWN event

Can some tell me what is going on so i can proceed further. Where do i need to look up and what i'm dealing with?

28

General Discussion / Re: Set Static IP from ISP to LAN client

« on: November 24, 2016, 05:07:56 am »

Thanks Bart!!

I managed to view the CCTV from my home using port forwarding with 1.32.99.n1:XXXX

What makes me wonder right now, how can i know the static ip given by my provider is up ? They gave me 1.32.99.n1/29. I only used one, the rest still free.

I tried with the advice but failed.

29

General Discussion / Re: Machine Hang After Cron Job

« on: August 11, 2016, 11:41:00 am »

Hi Franco,

I created that cron job so i can stop the service at certain hour every day and turn on back the service on certain hour the next day. So in previous build, i edited the actions_ids.conf with that lines. From that, i can select the task from from the command drop-down menu in https://myaddress/ui/cron/

Here is how i came up with that:

https://forum.opnsense.org/index.php?topic=2263.0

30

General Discussion / Re: crontab resetting after reboot

« on: August 11, 2016, 08:57:06 am »

Seems like almost identical with my case :

https://forum.opnsense.org/index.php?topic=3511.0