Messages

1

Hardware and Performance / Re: OPNsense <10gbe> Switch <25gbe> (devices A and B)

« on: February 05, 2024, 09:57:39 am »

Thank you so much for your reply. That is great news for me, however what if there are some firewall rules for LAN or some DNS server installed as a plugin in OPNsense? Shouldn't all traffic go through OPNsense 192.168.0.1 interface?

2

Hardware and Performance / OPNsense <10gbe> Switch <25gbe> (devices A and B)

« on: February 05, 2024, 08:25:51 am »

I have an OPNsense router's LAN (192.168.0.1) connected to 10gbe port on my switch and a couple of devices (A, B) connected to the same switch via 25gbe ports. OPNsense acts as a DHCP server. Does anyone know when devices A (192.168.0.2) and B (192.168.0.3) transfer files between each other are they limited by the 10gbe OPNsense router to switch connection or they can use full bandwidth of 25gbe switching capacity?

3

Documentation and Translation / Re: AdGuard Home setup guide

« on: June 09, 2023, 08:46:22 am »

I have a similar problem reported by bigverm23. Once I follow the guide by yeraycito, my internet stops working.

OPNsense 23.1.9-amd64
Adguard Home v0.107.31

Opnsense 23.1 Install:

1 - Activate mimugmail's community repository:

SSH Opnsense: fetch -o /usr/local/etc/pkg/repos/mimugmail.conf https://www.routerperformance.net/mimugmail.conf

2 - Install AdGuardHome from System --> Firmware --> Plugins

3 - Opnsense - System - Settings -General

      DNS Servers: empty

      Untick: Do not use the local DNS service as a nameserver for this system

      Untick: Allow DNS server list to be overridden by DHCP/PPP on WAN

4 - Services – DHCPv4 – [LAN] : DNS Servers all empty

5 – Opnsense – Services - Unbound DNS – General

       Tick: Enable Unbound ( Listen Port: 5353 )

       Tick: Enable DNSSEC Support
       
       Network Interfaces: All

6 - Opnsense - Services - Unbound - Dns Over Tls

      Server IP: 1.1.1.1

      Server Port: 853

      Verify CN: cloudflare-dns.com

7 - Activate and start AdGuardHome from Services --> AdGuardHome

8 - Navigate to http://Opnsense ip:3000/ ( 192.168.1.1:3000 ) to complete the setup Adguard

9 - Adguard Home - DNS Configuration - Upstream Servers:

      Add Opnsense ip:5353  ( 192.168.1.1:5353 ) Delete those that exist

10 – Adguard Home – DNS Configuration – Bootstrap DNS servers

      Add Opnsense ip:5353  ( 192.168.1.1:5353 ) Delete those that exist
     
11 - Adguard Home - DNS Configuration - Private reverse DNS servers:

           192.168.1.1:5353

for some reason when I followed these steps, it seemingly brought down my WAN permanently...as in, it did not recover and I had to reverse everything, including Unbound to get the WAN UP again....anybody else?