Messages

1

24.7 Production Series / Re: Gateway falsely marked as down after restart. Works again after clicking "apply"

« on: July 30, 2024, 04:19:31 pm »

Have you tried using a monitor IP on the gateway? If you set a gateway to "monitor" the IP of the opposite gateway, does it still do this?

2

24.7 Production Series / Re: Traffic Shaper blocks Internet after Update

« on: July 30, 2024, 02:33:42 am »

this kernel worked for me. I am using FQ_PIE without losing internet.

3

24.7 Production Series / Re: Traffic Shaper blocks Internet after Update

« on: July 30, 2024, 02:01:07 am »

I'm seeing the same issue. I kept losing WAN on upgrade and could not figure out why. I tried three times. It was a Reddit user that clued me into the "PIE" issue and this post. Thanks for all your work on this. I'm hoping to give this a try as soon as I can.

4

23.1 Legacy Series / Re: [CALL FOR TESTING] Netmap generic mode queue stall fixes

« on: February 05, 2023, 11:17:36 pm »

Hello.

For clarity, I had this same issue on two different machines before testing the new Kernel. This issue only appears when Netmap ZA is in Routed Mode. In bypass or passive mode I have no issue.

The issue is specifically a router crash. Router becomes unresponsive and all connectivity fails for a period of time. Often requires a power reset to recover. 

The issue only appears when ZA is in routed mode and it only happens when transferring a single large file between vlans. Something like a 5GB .iso file. I can transfer a 5GB folder full of smaller files with no issue.

I have tried with the vlans on the same parent interface and I’ve also tried with the vlans on different physical interfaces. Same issue.

I’m currently using a Netgate 6100 with the 10G (ix) uplinks. I also had the same issue on my previous Dell SFF PC using X550-T2 NIC (also ix).

It happened on the stock kernel and it also happens with this new test kernel.

5

23.1 Legacy Series / Re: [CALL FOR TESTING] Netmap generic mode queue stall fixes

« on: February 05, 2023, 12:17:57 am »

Just reporting my findings.

Performance is much better overall, but Large file transfers (like Win11.iso) between vlans still result in a complete lockup of the router when Zenarmor is active. All vlans are on the same parent interface (ix0) which is monitored by Zenarmor.

I am also seeing 100% A+ ratings on waveform bufferbloat test with Shaper configured. I used to see an A rating with moderate increase in buffebloat. It’s absolutely zero now with a consistent A+. Even without Zenarmor, I’ll be running this kernel for awhile. Thank you all for your efforts to improve the platform.

6

Zenarmor (Sensei) / Re: Zenarmor - install database - freeze

« on: October 31, 2022, 07:19:43 pm »

I'm also stuck in the exact same spot after uninstalling/reinstalling Zenarmor. Have you been able to work this out yet?