Messages

1

24.1 Legacy Series / problems with reporting unbound dns

« on: November 06, 2024, 09:56:52 pm »

OPNsense
Versions
OPNsense 24.10_7-amd64
FreeBSD 14.1-RELEASE-p5
OpenSSL 3.0.15
DEC 850 hardware
Don't really know were to start. Reporting unbound dns will only work for about 12 hours. Then quits! When I change the setup, like disable it or do something with data base. It won't save, just spin's. Reboot it and it will save. If I get tired of the spinning and hit F5 it will show saved but does not. Just acting strange. Don't really know were to start.
Zenarmor
1.18.1 - Nov 1, 2024 9:33 AM
Application DB: 1.18.24102412 - Nov 1, 2024 9:33 AM

Thanks

2

Hardware and Performance / Re: DEC850 - boot hangs, USB new install, no serial console screen

« on: October 27, 2024, 04:29:36 pm »

I was trying to find my notes. I use sudo screen/dev/ttyUSB0 115200 When it just sits there with a blank screen cycle the power.
It's been while but I'll try to help. I also have a DEC850

OPNsense devices from the OPNsense shop use <ESC> to enter the bios and boot selection options.

3

Zenarmor (Sensei) / Re: zenarmor devices

« on: September 19, 2024, 05:26:23 pm »

Posted by: IHK
Thanks I may give that a shot

4

Zenarmor (Sensei) / Re: zenarmor devices

« on: September 12, 2024, 05:12:47 pm »

thanks for the reply, it is fully registered! 17 devices online 2 not seen

5

Zenarmor (Sensei) / zenarmor devices

« on: September 12, 2024, 04:09:58 pm »

Device is not seeing all devices. I had to reinstall opnsense and zenarmor. Before the device was seen. Now it's not. Don't think I changed anything. suggestions for finding device? The device that is an apple ipad, also a network switch.

Thanks

6

General Discussion / Re: Many ssh conncetion attempts from WAN interface

« on: March 30, 2024, 04:47:07 pm »

I am by no means an X-pert! I discovered the same thing while looking at the log's. I had enabled opnsense admin page to wan. My setup had no business being setup that way. Control everything local lan.

7

Zenarmor (Sensei) / Re: This is basic, just can't find it

« on: December 05, 2023, 06:20:38 pm »

Thanks for the reply, I guess I'll have to figure out the filters.

8

Zenarmor (Sensei) / This is basic, just can't find it

« on: December 05, 2023, 05:14:44 pm »

detected 14 and blocked 11 potentially harmful activities according to your rules. How do I find the detected harmful activities? Figure out if I should block them.

Thanks

9

Zenarmor (Sensei) / Re: Zenarmor on the DEC850

« on: September 16, 2023, 05:04:39 pm »

The DEC850 is running fine after latest update. I'm no xpert but do have the 850. Let me know if I can help.

10

Zenarmor (Sensei) / Re: [SOLVED] Zenarmor will not register to Cloud Console

« on: August 18, 2023, 10:01:38 am »

Now fixed for me also!

11

Zenarmor (Sensei) / Re: Zenarmor will not register to Cloud Console

« on: August 17, 2023, 06:12:21 pm »

yes I have! I just gave up. There was an update available 14.3....In zenarmor dies at 30% multiple time! Got from opnsense check for update. No help, but let you know your not the only one...
hardware dec850     OPNsense 23.4.2-amd64

12

Virtual private networks / Re: Cryptography settings

« on: August 05, 2023, 09:48:04 am »

Thanks for the help

13

Hardware and Performance / DEC850

« on: August 04, 2023, 07:04:50 pm »

I have setup a new 850. looking for some performance tweaks. There are so many options with opnsense, I could use help.

Thanks

14

Virtual private networks / Cryptography settings

« on: August 04, 2023, 12:31:36 pm »

I have a DEC850. Trying to set things up. I am unsure about Hardware acceleration. AMD EPYC 3201 8-Core Processor (8 cores, 8 threads). I believe it will use acceleration.

Thanks for any help

15

Virtual private networks / Re: dec850 wireguard no start

« on: July 16, 2023, 10:22:56 am »

I am using the os-wireguard, os-wireguard-go will not start. Gave up on the go version!