1
Dutch - Nederlands / Re: DEC3860 verkopen
« on: February 21, 2023, 07:27:34 am »
Tja... leuke firewall. Maar ver boven wat ik zou betalen voor mijn router. Ik ben maar een thuisgebruiker.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Zenarmor (Sensei) / Re: Trusting Zenarmor (fka Sensei) / Sunny Valley Networks
« on: February 12, 2023, 07:03:08 pm »
Suppose you have a schools community with 10 schools at different locations, with more than 1000 persons. It is not prohibited to tie the data to a location, it is prohibited to tie the data to individual persons.
3
Zenarmor (Sensei) / Re: Trusting Zenarmor (fka Sensei) / Sunny Valley Networks
« on: February 08, 2023, 06:33:34 pm »
The only problem is if you tie such data to a person. If it is anonymised, it is not a privacy matter.
4
Zenarmor (Sensei) / Re: Zenarmor free edition (education context)
« on: February 07, 2023, 10:00:08 am »
If you need to know more: https://www.europeanlawinstitute.eu/fileadmin/user_upload/p_eli/Publications/ELI_Statement_on_DCD.pdf
5
Zenarmor (Sensei) / Re: Zenarmor free edition (education context)
« on: February 07, 2023, 08:06:11 am »
Juridically, if we speak of pirated software, we are talking sense. It's illegal to use pirated software, i.e. software whose activation mechanism has been altered.
But nobody knows if an EULA violation by a consumer is juridically meaningful. It has not been tested in court, with the exception of GPL compliance, and GPL compliance is restricted to software makers.
But nobody knows if an EULA violation by a consumer is juridically meaningful. It has not been tested in court, with the exception of GPL compliance, and GPL compliance is restricted to software makers.
6
23.1 Production Series / Re: [CALL FOR TESTING] Netmap generic mode queue stall fixes
« on: February 04, 2023, 02:41:11 am »
The test kernel works.
# dmesg | grep generic_netmap_register gives me nothing.
Can I test Zenarmor multicore? I.e. eastpect multicore.
# dmesg | grep generic_netmap_register gives me nothing.
Can I test Zenarmor multicore? I.e. eastpect multicore.
7
Zenarmor (Sensei) / Re: FreeBSD Install
« on: January 31, 2023, 07:08:53 pm »
About "It's expected that if you use L2 Bridge Mode (netmap), whenever you stop the packet engine the bridge will go down - since bridge is managed by zenarmor itself.": Zenarmor tries to create a bridge or kind of, but I have no connectivity. With the manually created bridge I get connectivity through Zenarmor. If it matters, the bridge is created after Zenarmor starts.
8
Zenarmor (Sensei) / Re: FreeBSD Install
« on: January 30, 2023, 07:04:10 pm »
Hi, I have OPNsense 23.1 and Zenarmor 1.12.4.
Zenarmor cannot create a stable bridge. But if I create the bridge manually, as shown above, it works okay with the bridge.
It runs on an APU2C4 or APU2E4 (I don't remember which of the two).
Zenarmor cannot create a stable bridge. But if I create the bridge manually, as shown above, it works okay with the bridge.
It runs on an APU2C4 or APU2E4 (I don't remember which of the two).
9
23.1 Production Series / ddclient-devel is broken
« on: January 22, 2023, 08:05:53 pm »
It says:
Reverting to stable ddclient (ddclient-3.9.1.pkg) solves the problem (but you should backup the folder /usr/local/opnsense/scripts/ddclient beforehand and then restore it).
Code: [Select]
Use of uninitialized value $h in hash element at /usr/local/sbin/ddclient line 4 105.
Use of uninitialized value $h in hash element at /usr/local/sbin/ddclient line 4 107.
Use of uninitialized value $h in hash element at /usr/local/sbin/ddclient line 4 108.
Use of uninitialized value $_[0] in sprintf at /usr/local/sbin/ddclient line 216 3.
SUCCESS: updating : good: IP address set to xx.xx.xxx.xx
Use of uninitialized value $h in hash element at /usr/local/sbin/ddclient line 4 105.
Use of uninitialized value $_[0] in sprintf at /usr/local/sbin/ddclient line 216 3.
FAILED: updating : unexpected status (0)
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
Use of uninitialized value in string ne at /usr/local/sbin/ddclient line 1157.
FAILED: was not updated because protocol <undefined> is not supported.
Reverting to stable ddclient (ddclient-3.9.1.pkg) solves the problem (but you should backup the folder /usr/local/opnsense/scripts/ddclient beforehand and then restore it).
10
Development and Code Review / Re: OpnSense on FreeBSD 13.1/14-CURRENT in RPI 4 CM isit possible?
« on: January 06, 2023, 09:25:57 pm »
Even if it worked, Rpi4 is too slow to do anything meaningful with it.
11
22.7 Legacy Series / Re: force LAN IPv6 suffix
« on: December 22, 2022, 12:17:06 pm »
Oh, boy. Track WAN assigns to LAN /62 in one location (behind OpenWRT) and /60 at another house (immediately behind Ziggo modem/router, that is in its DMZ).
In both cases a public /64 gets assigned to WAN.
In both cases a public /64 gets assigned to WAN.
12
22.7 Legacy Series / Re: force LAN IPv6 suffix
« on: December 22, 2022, 02:11:32 am »
In OpenWRT I have a /60 on the LAN. And it works.
13
22.7 Legacy Series / Re: force LAN IPv6 suffix
« on: December 21, 2022, 09:13:38 am »
Then I would like to have a checkbox to force a /64, nothing else.
If it matters, I have the internet provider Ziggo from the Netherlands. It behaves pretty much like FLETS from Japan.
If it matters, I have the internet provider Ziggo from the Netherlands. It behaves pretty much like FLETS from Japan.
14
22.7 Legacy Series / Re: force LAN IPv6 suffix
« on: December 20, 2022, 11:41:59 am »
The WAN used to have public /64 IPs. It no longer haves them. Now it's a private /64. And it fixed the /62 into a /64 range for LAN.
15
22.7 Legacy Series / Re: force LAN IPv6 suffix
« on: December 20, 2022, 12:30:03 am »
I fixed it with a hack. I have applied Step 3 from https://docs.opnsense.org/manual/how-tos/ipv6_dsl.html