Messages

1

21.7 Legacy Series / opnsense does not respond to sip options

« on: November 12, 2021, 07:54:30 am »

Yes ..
I did some packet capture, and I understand what happens, but I don't understand why.  i configured 2 wan with failover and i saw that option packets come in from the first connection and leave the second.  if I check which connection the pbx navigates with, I see that it is on the first one ...
now I have changed the configuration type and fixed the problem, but I would have liked to understand why this behavior.

2

21.7 Legacy Series / opnsense does not respond to sip options

« on: November 08, 2021, 09:07:47 pm »

Hello to all. i don't understand why opn doesn't reply to options packages. I see the packets enter but do not go back. some idea? ip packets arrive at the pbx.
the pbx is behind nat

3

21.7 Legacy Series / Re: Configure the virtual ip for a pc

« on: October 12, 2021, 05:01:57 pm »

I use this type of configuration  for a published PBX. I have a problem now, the calls arrive correctly and if I check my public ip matches the one assigned, but when I make a phone call I see that the connection is established with the previous ip and not with the new ip. I do not understand why

4

21.7 Legacy Series / Re: Configure the virtual ip for a pc

« on: October 08, 2021, 07:58:39 am »

thanks a lot GoodOm.  I understood that I had to use the outbond, but your description is accurate.
Admin can close the 3D
Thanks

5

21.7 Legacy Series / Configure the virtual ip for a pc

« on: October 08, 2021, 12:34:27 am »

How do i force a pc to go out with a virtual ip?
obviously the ip is part of the range at my disposal.
thanks

6

20.7 Legacy Series / Re: Configure the virtual ip for a pc

« on: October 08, 2021, 12:32:50 am »

sorry I entered the tread in the wrong area

7

20.7 Legacy Series / Configure the virtual ip for a pc

« on: October 08, 2021, 12:31:19 am »

How do i force a pc to go out with a virtual ip?
obviously the ip is part of the range at my disposal.
thanks

8

20.7 Legacy Series / Re: Access to the dmz when connected via vpn

« on: October 29, 2020, 02:13:41 pm »

solved quickly. for knowledge just add the range of the subnet you are interested in in the configuration of the vpn server

9

20.7 Legacy Series / Access to the dmz when connected via vpn

« on: October 29, 2020, 02:00:39 pm »

good morning
my dmz is configured with access from the lan side.
it is not possible to access from the dmz to the lan.
when i connect to the vpn i cannot access the vpn.
what can I do?

thank you

10

20.7 Legacy Series / Re: Lan dhcp ips firewall rule ?

« on: September 28, 2020, 07:46:52 am »

opnsense by default has no traffic blocks on the lan, all traffic is allowed. sorry but I still don't understand.  the ip you are using for the lan were provided by a provider?  are ip public?

11

20.7 Legacy Series / Re: Lan dhcp ips firewall rule ?

« on: September 28, 2020, 07:18:24 am »

it is not easy if you have no experience, you must know nat and portforwarding. I did not understand well, did you give your webserver a public ip?  can you detail your configuration?

12

20.7 Legacy Series / Re: Lan dhcp ips firewall rule ?

« on: September 28, 2020, 06:57:12 am »

For ex. 192.168.10.1/24
Dhcp start from 192.168.10.100
 And 192.168.10.200


Inviato dal mio iPhone utilizzando Tapatalk

13

20.7 Legacy Series / Re: Lan dhcp ips firewall rule ?

« on: September 28, 2020, 06:47:13 am »

you are not using proper lan configuration because you are not using private ip.  start configuring the LAN better

14

20.7 Legacy Series / Re: Lan dhcp ips firewall rule ?

« on: September 28, 2020, 06:35:14 am »

10.0.0.0        -   10.255.255.255
172.16.0.0      -   172.31.255.255
192.168.0.0     -   192.168.255.255

15

20.7 Legacy Series / Re: Lan dhcp ips firewall rule ?

« on: September 28, 2020, 06:27:59 am »

Hello .  first start using a class of private ip for the lan.