Messages

1

22.1 Legacy Series / Re: errors and strange behavior opnsense 22.1.1_1

« on: February 17, 2022, 06:25:56 pm »

Hello

I have the same feeling on my side.
Checked the interface and MTU but everything seems ok

Hardware : PCengine APU2C4

Was working as a charm on 22.1 GA

Logan

2

19.7 Legacy Series / Re: Gateway monitoring - High RTTD

« on: November 28, 2019, 03:59:15 pm »

Maybe there is a issue with the driver of the network interfaces.
I don't know if there was some change in the NIC driver configuration in the last release.

I still have the 100-200ms RTTD on the WAN interface on my pcengines APU 2C4

3

19.7 Legacy Series / Re: Gateway monitoring - High RTTD

« on: November 17, 2019, 12:46:39 pm »

Any updates from anyone ?

4

19.7 Legacy Series / Re: Gateway monitoring - High RTTD

« on: November 12, 2019, 08:25:26 pm »

On my appliance there is no proxy enabled and I also got the issue.

I don't know if it's related to the hardware or network interface driver but I am stuck with my internet

5

19.7 Legacy Series / Re: Gateway monitoring - High RTTD

« on: November 10, 2019, 02:06:15 pm »

I try so many change also without any resolution.

I was waiting for the next Opnsense update but it doesn't fix my issue.

It would be nice to have a fix...

I am running the latest release of opnsense on a PcEngine APU 2C4

6

19.7 Legacy Series / Re: High RTTD

« on: October 22, 2019, 08:14:48 pm »

Please help me.

I try so many things without any result.
I have attached a screenshot from the gateway monitoring tab.

Logan

7

19.7 Legacy Series / Gateway monitoring - High RTTD

« on: October 17, 2019, 10:24:20 pm »

Hello guys,

I noticed that since last update 19.7.3 I have the RTTD that’s very high 150 ms and the RTT is low. (Gateway monitoring)

I contact my internet provider and they check the connection from their part but there is nothing.

The logs show me that this issue appeared after a restart on 22 September...

Do you know if the issue is coming from opnsense itself or dpinger plugin ?

Thank you for your help,
Logan

8

19.1 Legacy Series / Re: 19.1 completely messed up my network

« on: February 05, 2019, 03:52:26 pm »

Hi,

I got the same issue and that was due to the MTU.

You can check it by running the ifconfig command on the OpnSense CLI.

A topic already exist in the forum and the update 19.1.1 seems to be released soon.

Logo

9

19.1 Legacy Series / Re: ERR_CONNECTION_RESET After upgrading to 19.1

« on: February 02, 2019, 04:02:13 pm »

@Mimugmail

Thank you so much you solve my issue !

With this option the MTU keeps running at 1500 using the DHCP.

Thank you again

10

19.1 Legacy Series / Re: ERR_CONNECTION_RESET After upgrading to 19.1

« on: February 02, 2019, 12:19:50 pm »

Issue coming from MTU set to 576 by DHCP on WAN.

See post : https://forum.opnsense.org/index.php?topic=11425.0

11

19.1 Legacy Series / Re: Needed to force Realtek 8168's MTU after 19.1 Upgrade

« on: February 02, 2019, 12:00:02 pm »

That's what I do and now the MTU stays at 1500 and I have again a working connection to internet.

Please find a way to disable the auto MTU coming from DHCP side.


Can we configure something in OpnSense to disable the MTU to be set by the DHCP server on the WAN ?

Thanks

12

19.1 Legacy Series / Re: ERR_CONNECTION_RESET After upgrading to 19.1

« on: February 02, 2019, 11:43:24 am »

Yes that’s what I do but after that I am loosing packet to internet (Ping command).
And I check with ifconfig and the interface stays at 576 even if it’s configured on GUI

13

19.1 Legacy Series / Re: Needed to force Realtek 8168's MTU after 19.1 Upgrade

« on: February 02, 2019, 11:41:19 am »

I got the same issue on a pcengines APU but even if I tried to change manualy the MTU in the GUI it doesn’t reflect in the ifconfig command on cli.

The MTU directly switch to 576 again ...

I tried with reboot and stil the same
All other LAN and DMZ interfaces are Running at 1500 MTU without having to configure them.

Do you know how can I solve this issue ?
Thank you

14

19.1 Legacy Series / Re: ERR_CONNECTION_RESET After upgrading to 19.1

« on: February 02, 2019, 11:09:07 am »

Yes and yes the MTU is set to 576 on my WAN.

I tried to force the MTU to 1500 on the interface but in CLI with ifconfig the interface stays at 576 even if I reboot thé opnsense.

I saw on internet that this settings are transmitted by DHCP on WAN are they any ways to disable the 576 ?

Thanks

15

19.1 Legacy Series / Re: ERR_CONNECTION_RESET After upgrading to 19.1

« on: February 01, 2019, 08:34:56 pm »

My Iphone is unable to reach the apple store but can access some website.

I'm sure that I'm not the only one getting this issue