1
General Discussion / Re: RFC8781/PREF64 Support
« on: February 13, 2024, 04:32:42 am »
I guess that's a no, then? 
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
General Discussion / RFC8781/PREF64 Support
« on: February 06, 2024, 11:12:00 pm »
Is RFC8781/PREF64 support planned to be implemented into OPNsense any time soon? I've been trying to get an IPv6-MOSTLY network going, and this is really the last thing I'm waiting on before I can really experiment with one.
3
23.7 Legacy Series / Re: Can’t update 23.7.7
« on: November 01, 2023, 02:49:08 pm »Reporting: Settings: Unbound DNS reporting: Reset DNS data
At least that is the one it complains about. It fills the graphs for Reporting: Unbound DNS but if you don't need those you could also turn if off as well (from the settings page) to save energy and your disk.
Cheers,
Franco
Thanks! I reset that and the reporting seems to be working again.
4
23.7 Legacy Series / Re: Can’t update 23.7.7
« on: November 01, 2023, 03:27:04 am »SIGABRT? I would recommend resetting the database and hope that the disk itself isn't failing.
Cheers,
Franco
Thanks, Franco. I checked the SMART status of the disk and it is passing, so maybe it's the database problem. How would I reset that? I'm unsure to which database you are referring.
5
23.7 Legacy Series / Re: Can’t update 23.7.7
« on: October 31, 2023, 03:44:50 am »
Logs full of these errors every time I try to reset the logging for unbound. It works for a few minutes, then the graphs just all go to zero until the logger is restarted somehow (I usually do this by just clicking "save" on the DHCPv4 service).
6
23.7 Legacy Series / Re: Can’t update 23.7.7
« on: October 31, 2023, 03:39:13 am »Same problem here.
Error due to SSL 1.1.1 then update failed.
I have tried the update again to be able to copy the logs, it passed, seemed to have worked but no more routing since reboot.
I cannot post logs as I am writing this from my phone.
What can I do?
The GUI works OK, but no packet routing and CPU load is super high, used by Python3.9.
I don't have high CPU load, but I did get the error about OpenSSL conflicting with itself. Tried again and the update installed, but now Python 3.9 keeps crashing and Unbound blocking reporting doesn't seem to be working anymore.
7
23.1 Legacy Series / Re: Unbound DNSBL Not Working? Fatal Python Error?
« on: February 28, 2023, 07:01:11 pm »Similar issue here. I'm not using any of the default lists, I use advanced mode with a single blocklist URL specified. No matter what I do, the size of the blocklist is always 0 now. This is with no whitelisting configured and return NXDOMAIN checked. Unbound blocklist feature does indeed appear to be broken now.Looks like in my case, unbound blocklist format has changed? If I select the "unbound" downloads from oisd.nl or https://github.com/hagezi/dns-blocklists it does not work, but if I use the "domains" format instead, it works as expected.Code: [Select]2023-02-28T12:48:40-05:00 Notice unbound blocklist download done in 2.20 seconds (0 records)
2023-02-28T12:48:40-05:00 Notice unbound blocklist download https://raw.githubusercontent.com/hagezi/dns-blocklists/main/unbound/pro.blacklist.conf (lines: 486283 exclude: 486273 block: 0)
2023-02-28T12:48:38-05:00 Notice unbound blocklist download : exclude domains matching .*localhost$|^(?![a-zA-Z_\d]).*
8
23.1 Legacy Series / Re: Unbound DNSBL Not Working? Fatal Python Error?
« on: February 28, 2023, 06:50:29 pm »
Similar issue here. I'm not using any of the default lists, I use advanced mode with a single blocklist URL specified. No matter what I do, the size of the blocklist is always 0 now. This is with no whitelisting configured and return NXDOMAIN checked. Unbound blocklist feature does indeed appear to be broken now.
Code: [Select]
2023-02-28T12:48:40-05:00 Notice unbound blocklist download done in 2.20 seconds (0 records)
2023-02-28T12:48:40-05:00 Notice unbound blocklist download https://raw.githubusercontent.com/hagezi/dns-blocklists/main/unbound/pro.blacklist.conf (lines: 486283 exclude: 486273 block: 0)
2023-02-28T12:48:38-05:00 Notice unbound blocklist download : exclude domains matching .*localhost$|^(?![a-zA-Z_\d]).*
9
23.1 Legacy Series / Re: Problems w/23.1_6 Upgrade including IPv6 - Maybe a Zenarmor Issue?
« on: February 15, 2023, 05:01:28 am »
Similar issue here. As long as Zenarmor is not in bypass mode, I fail any IPv6 tests I try to do. As soon as I enable bypass mode, the issue goes away. Tested multiple times.
10
22.7 Legacy Series / Re: Firewall Frequently Locking Up, Requiring Hard Reboot
« on: September 28, 2022, 09:37:29 pm »That would explain it. Maybe not all hardware is affected like this... would be best to keep track of traces separately for each machine. Maybe the other two have a single panic to trace.It was the same RAM modules in all three of them in this case as I just swapped them into each box, but you are right that keeping track of which machine generated which trace is a good idea in the future. Though hopefully with new RAM it won't be necessary...
Cheers,
Franco
11
22.7 Legacy Series / Re: Firewall Frequently Locking Up, Requiring Hard Reboot
« on: September 27, 2022, 06:43:07 pm »
I figured it out - bad RAM. It tested fine on the first device but just to be sure I tested it again... this time it threw so many errors memtest86 couldn't even complete a full pass.
D'oh.
D'oh.
12
22.7 Legacy Series / Re: Firewall Frequently Locking Up, Requiring Hard Reboot
« on: September 27, 2022, 02:37:22 pm »
Another one... odd if it were hardware issues across three separate sets of hardware, but maybe I'm just extraordinarily unlucky this time. I'll try swapping out the RAM and/or SSD and see if either of those resolves it.
13
22.7 Legacy Series / Re: Firewall Frequently Locking Up, Requiring Hard Reboot
« on: September 27, 2022, 04:02:26 am »
Another set of hardware, this time some different things are crashing. Luckily so far, the services have recovered on their own and none have required a hard power cycle.
Got this crash dump most recently.
Got this crash dump most recently.
14
22.7 Legacy Series / Re: Firewall Frequently Locking Up, Requiring Hard Reboot
« on: September 11, 2022, 05:09:47 pm »
Ok.
15
22.7 Legacy Series / Re: Firewall Frequently Locking Up, Requiring Hard Reboot
« on: September 10, 2022, 08:09:48 pm »So that's a fairly new chipset. Even Intel itself only has windows drivers:Question what? BSD 13 has the igc driver for the I226.
https://www.intel.com/content/www/us/en/products/sku/210599/intel-ethernet-controller-i226v/downloads.html
So if BSD does support them, it's on it's own within the kernel. I would question this greatly.