1
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
18.1 Legacy Series / Re: Still some problems with the 18.1 release
« on: February 02, 2018, 07:14:56 pm »
I use the default settings (ALL recommended)
Even if I only use the LAN interface, the CARP address is also hung on it, and if I temporarily disable it, the situation will be the same, since I can not select only the interface address, without the virtual IP
The GUI interface is not available at this time. There are no processes in the system:
/usr/local/sbin/lighttpd -f /var/etc/lighty-webConfigurator.conf
/usr/local/bin/php-cgi
Even if I only use the LAN interface, the CARP address is also hung on it, and if I temporarily disable it, the situation will be the same, since I can not select only the interface address, without the virtual IP
The GUI interface is not available at this time. There are no processes in the system:
/usr/local/sbin/lighttpd -f /var/etc/lighty-webConfigurator.conf
/usr/local/bin/php-cgi
3
18.1 Legacy Series / Still some problems with the 18.1 release
« on: February 02, 2018, 08:36:52 am »
1. When reconfiguring the interfaces, the web GUI falls
---------------
# /usr/local/etc/rc.restart_webgui
Starting web GUI...failed.
Generating RRD graphs...done.
---------------
This happens when the CARP interfaces are temporarily blocked.
# /usr/local/sbin/lighttpd -f /var/etc/lighty-webConfigurator.conf
2018-02-01 11:45:22: (network.c.313) can't bind to socket: 192.168.144.254:443 Can't assign requested address
2. In the screenshots, the one and the other zoomlevel in 25 minutes, but the pictures are different.
https://yadi.sk/i/v8OqSYSt3RyXTc
https://yadi.sk/i/1V55xU0A3RyXb7
And about the problem of MultiWAN and DHCP, the forum is full of messages.
---------------
# /usr/local/etc/rc.restart_webgui
Starting web GUI...failed.
Generating RRD graphs...done.
---------------
This happens when the CARP interfaces are temporarily blocked.
# /usr/local/sbin/lighttpd -f /var/etc/lighty-webConfigurator.conf
2018-02-01 11:45:22: (network.c.313) can't bind to socket: 192.168.144.254:443 Can't assign requested address
2. In the screenshots, the one and the other zoomlevel in 25 minutes, but the pictures are different.
https://yadi.sk/i/v8OqSYSt3RyXTc
https://yadi.sk/i/1V55xU0A3RyXb7
And about the problem of MultiWAN and DHCP, the forum is full of messages.
4
Russian - Русский / Re: Connect CellPhone or 4G modem for MultiWAN
« on: February 01, 2018, 09:06:34 am »
Привет.
Тут пишут про давнюю проблему с динамическим адресом и потерей default GW
https://forum.opnsense.org/index.php?topic=7089.0;topicseen
Что есть тикеты, в суппорт и пока эта проблема не решена.
Я столкнулся пока с удваиванием GW на одном интерфейсе.
Тут пишут про давнюю проблему с динамическим адресом и потерей default GW
https://forum.opnsense.org/index.php?topic=7089.0;topicseen
Что есть тикеты, в суппорт и пока эта проблема не решена.
Я столкнулся пока с удваиванием GW на одном интерфейсе.
5
18.1 Legacy Series / Re: Multi WAN on 18.1
« on: January 31, 2018, 08:00:04 am »
Hey.
I would not renew it if I were you.
Now I have a problem with the change of GW. More precisely I can say in a few days. And there are still a lot of errors in the interface.
I would not renew it if I were you.
Now I have a problem with the change of GW. More precisely I can say in a few days. And there are still a lot of errors in the interface.
6
17.7 Legacy Series / Re: AHCI Timeout and Reboot problem
« on: January 18, 2018, 10:14:21 am »
Hi, Franco
I put it many times in different modes, but I checked MBR again, a miracle did not happen, after the second reboot, the AHCI timeouts
Regards,
Konstantin
I put it many times in different modes, but I checked MBR again, a miracle did not happen, after the second reboot, the AHCI timeouts
Regards,
Konstantin
7
Russian - Русский / Re: Connect CellPhone or 4G modem for MultiWAN
« on: January 17, 2018, 01:48:44 pm »
У тебя эта галочка стоит?
Disable State Killing on Gateway Failure
Какие настройки у тебя сделаны для MultiWAN?
Disable State Killing on Gateway Failure
Какие настройки у тебя сделаны для MultiWAN?
8
17.7 Legacy Series / Re: AHCI Timeout and Reboot problem
« on: January 17, 2018, 01:27:21 pm »
Hi, Franco
I spent many more experiments with the configuration of the system, but on my computer configuration it does not want to work. But if I replace my mPCI 512 GB drive with a SATA drive of 128 GB, the system starts to boot without problems. Both hard drives from the company SAMSUNG
Regards
I spent many more experiments with the configuration of the system, but on my computer configuration it does not want to work. But if I replace my mPCI 512 GB drive with a SATA drive of 128 GB, the system starts to boot without problems. Both hard drives from the company SAMSUNG
Regards
9
17.7 Legacy Series / Re: AHCI Timeout and Reboot problem
« on: January 12, 2018, 06:42:04 pm »The problem with rebooting is no more.
The problem with the AHCI timeout is not fixed.
10
17.7 Legacy Series / Re: AHCI Timeout and Reboot problem
« on: January 12, 2018, 07:45:14 am »
No, I contributed only those settings that are referenced by github.
I could not find the image 18.1-RC1. Can you give me a link to it?
I could not find the image 18.1-RC1. Can you give me a link to it?
11
Russian - Русский / Re: Connect CellPhone or 4G modem for MultiWAN
« on: January 11, 2018, 08:39:18 pm »DNS на пинги влиять не может, разве, что пинговать по имени.
Может картинку нарисуешь?
А то я в шахматы без доски играть не умею ;-)
Если бы на моем роутере работал OPNsense, я бы проверил...
И не сочти за холивар, но слова D-Linк уже сильно смущают.
12
17.7 Legacy Series / Re: AHCI Timeout and Reboot problem
« on: January 11, 2018, 08:30:50 pm »
Hi, franco
Thanks for the answer.
But this setting does not help.
I entered it in loader.conf.local
The problem did not dare.
Thanks for the answer.
But this setting does not help.
I entered it in loader.conf.local
The problem did not dare.
13
Russian - Русский / Re: Connect CellPhone or 4G modem for MultiWAN
« on: January 10, 2018, 01:32:11 pm »
А что в этот момент с статусами соединений в фаерволе, куда они хотят идти?
14
Russian - Русский / Проблемы с AHCI
« on: January 10, 2018, 01:29:04 pm »
Привет.
Я купил мини компьютер, с 6 портами этнернет и интел i3 3700, который позиционировался продавцом под роутер. Но я столкнулся с двумя проблемами:
1. При перезагрузки или выключении системы показы аптайм и дальше ничего не происходит.
2. после второй перезагрузки уже установленой системы на ССД диск (mPCIe) появляется таймаут по AHCI каналу.
Тут скриншот:
https://yadi.sk/d/-3Q8U4x43RL5U8
Тут много пишут, что это в 11 FreeBSD есть эта проблема - не согласен.
Последный PFsense на FreeBSD 11.1-RELEASE-p6 работает нормально.
Но мне нравиться этот продукт, и я бы хотел использовать OPNsense
Может кто подскажет, куда смотреть?
Я купил мини компьютер, с 6 портами этнернет и интел i3 3700, который позиционировался продавцом под роутер. Но я столкнулся с двумя проблемами:
1. При перезагрузки или выключении системы показы аптайм и дальше ничего не происходит.
2. после второй перезагрузки уже установленой системы на ССД диск (mPCIe) появляется таймаут по AHCI каналу.
Тут скриншот:
https://yadi.sk/d/-3Q8U4x43RL5U8
Тут много пишут, что это в 11 FreeBSD есть эта проблема - не согласен.
Последный PFsense на FreeBSD 11.1-RELEASE-p6 работает нормально.
Но мне нравиться этот продукт, и я бы хотел использовать OPNsense
Может кто подскажет, куда смотреть?
15
17.7 Legacy Series / AHCI Timeout and Reboot problem
« on: January 10, 2018, 01:27:41 pm »
Hi,
I bought a mini computer, with 6 ports of etnernet and intel i3 3700, which was positioned by the seller under the router. But I faced two problems:
1. When the system is rebooted or turned off, the uptime shows nothing further.
2. After the second reboot of the already installed system on the SSD drive (mPCIe), the AHCI channel timeout occurs.
Here is a screenshot:
https://yadi.sk/d/-3Q8U4x43RL5U8
There is a lot of writing that this is in 11 FreeBSD is this problem - do not agree.
The last PFsense on FreeBSD 11.1-RELEASE-p6 is working fine.
But I like this product, and I would like to use OPNsense
Can someone tell me where to look?
I bought a mini computer, with 6 ports of etnernet and intel i3 3700, which was positioned by the seller under the router. But I faced two problems:
1. When the system is rebooted or turned off, the uptime shows nothing further.
2. After the second reboot of the already installed system on the SSD drive (mPCIe), the AHCI channel timeout occurs.
Here is a screenshot:
https://yadi.sk/d/-3Q8U4x43RL5U8
There is a lot of writing that this is in 11 FreeBSD is this problem - do not agree.
The last PFsense on FreeBSD 11.1-RELEASE-p6 is working fine.
But I like this product, and I would like to use OPNsense
Can someone tell me where to look?
Pages: [1] 2