Messages

1

16.7 Legacy Series / Re: Routing internet traffic through a site-to-site IPsec tunnel

« on: September 11, 2017, 01:51:52 pm »

Hi,

I have exactly the same problem !

I've got 1 OPNSense at home which handle 5 LANs (10.0.1.0/24 to 10.0.5.0/24). Got another OPNSense on another box that handle only 1 LAN (192.168.1.0/24).

As Strykar, I had set up an IPSec VPN that permit all LAN to be viewed from the other side.

When I try to route all the WAN traffic, the first OPNSense route ALL traffic (even the one that is destinated to local LAN, like 10.0.1.0/24) through the IPSec tunnel, instead of routing the LAN he known.

Is there any workaround to route all WAN traffic through Site B while routing all local LAN through Site A?

Thanks in advance,

coom

PS: BTW, I'm on the latest release (17.7.1_2-amd64)

2

16.1 Legacy Series / Re: Proxy authentification problem

« on: February 11, 2016, 01:51:55 pm »

AdSchellevis, you're the best ! I was missing that part of the config needed, sorry, my mistake !

I can continue my tests, and I appreciate your help. Thank you very much ! 

3

16.1 Legacy Series / Re: Proxy authentification problem

« on: February 11, 2016, 01:39:18 pm »

Hi,

Where do I set this rule on my user please ? I cannot find what you're talking about in the WebUI .. :/

4

16.1 Legacy Series / Re: Proxy authentification problem

« on: February 10, 2016, 11:37:57 am »

AdSchellevis: thank you for trying to help me.

I had unchecked the Transparent proxy box, and then rebooted the FW, but same thing.. Firefox keep asking me for the login/password.

When I try this on a pfSense, everything is working well.

Am i missing something?

5

16.1 Legacy Series / Re: Proxy authentification problem

« on: February 10, 2016, 11:13:04 am »

Hi,

Here is what you asked to me :



My settings seems correct, but it doesn't work.

6

16.1 Legacy Series / [SOLVED] Proxy authentification problem

« on: February 09, 2016, 11:11:07 pm »

Hi,

I am testing OPNsense 16.1.2-amd64 in a lab environment since 2 days. I would like to test the integrated squid with Local database based authentification, but it seems squid doesn't accept my login/password ?

Here is what I have done under the webui configuration :

Proxy authentification configuration :


I created a test user with "test" as password :


I check that the login and the password are OK :


But when I configure my browser (tested with both IE and Firefox) to use OPNSense as the proxy (192.168.1.254 on port 3128), the browser keep asking for the password :



I even tried with the root login : still no luck. 

Has someone an idea about what I did wrong please ?

Thanks by advance, and please excuse my english which is horrible..