Messages

1

German - Deutsch / Re: init7 10G: Multicast funktioniert nicht - Setup Interfaces, IGMP Proxy, etc.

« on: November 13, 2024, 10:13:45 am »

Eine Anleitung dazu findet sich in https://forum.opnsense.org/index.php?topic=17853.0.
UDP Port 5678 = MikroTik Neighbor Discovery protocol.

2

24.7 Production Series / Re: mlx4en failing to load after upgrade to 24.7

« on: August 20, 2024, 12:40:55 pm »

Works fine here (24.7.1; Mellanox ConnectX-3; Supermicro M11SDV-8CT-LN4F).

3

24.1 Legacy Series / Re: frequent log message "New IPv6 on mlxen0"

« on: May 14, 2024, 01:59:51 pm »

Thank you, Franco.

Cheers
Stefan

4

24.1 Legacy Series / [Solved] frequent log message "New IPv6 on mlxen0"

« on: May 14, 2024, 01:48:54 pm »

I have a dynamic IPv4 address and a static IPv6 /48 prefix on my WAN interface.
Network adapter is a Mellanox ConnectX/3.
WAN config:

• Block private networks [X]
• Block bogon networks [ ] (due to default deny bogons rule blocking dhcpv6 traffic; see https://forum.opnsense.org/index.php?topic=33616.0)
• IPv4 Configuration Type [DHCP]
• IPv6 Configuration Type [DHCPv6]
• Request only an IPv6 prefix [X]
• Prefix delegation size [48]
• all other checkboxes unticked

Every 8-10 seconds, a log entry "... configd.py[nnn]: [LogID] New IPv6 on mlxen0" is written.

The IPv6 WAN IP's for mxlen0 indeed do not change:

Code: [Select]

ifconfig mlxen0 | grep inet6
> inet6 fe80::e61d:2dff:fe1c:fe70%mlxen0 prefixlen 64 scopeid 0x9
> inet6 2a02:aaaa:bbbb:cccc:e61d:2dff:fe1c:fe70 prefixlen 64 autoconf
Hint: The IPv6 address 2a02:aaaa:bbbb:cccc:xxx shown above is outside the static /48 prefix.

/var/etc/dhcp6c.conf and /var/etc/dhcp6c_wan.conf:

Code: [Select]

interface mlxen0 {
  send ia-pd 0; # request prefix delegation
  request domain-name-servers;
  request domain-name;
  script "/var/etc/dhcp6c_wan_script.sh"; # we'd like some nameservers please
};

This problem exists since > 1 year. Today, I exported the config, reimported it and rebooted the router, but this had no effect. Everything works fine, but I wonder what is triggering the frequent log entries. Any idea ? Thank you.

5

20.7 Legacy Series / Re: Updating now ... will never stop ... im Stucked!

« on: October 23, 2020, 05:16:08 pm »

Same problem here upgrading from 20.7.3 to 20.7.4 (last line also "Reloading template OPNsense/xxxx").
Logged in via ssh, selected "6) Reboot system". After reboot and logging in via ssh again, I selected "12) Update from console". After that, the upgrade ran fine without further problems.

6

19.1 Legacy Series / Re: dpinger (IPv6) dies after upstream IP renewal

« on: June 23, 2019, 06:54:44 pm »

I have the same problem, and it also started with 19.1.8 (never seen before),

7

19.1 Legacy Series / Re: Limiting cross-interface DNS in Unbound

« on: April 14, 2019, 08:12:00 am »

Similar problem here. My OPNsense has several network zones; resolving the router ip via nslookup/dig delivers all router ip addresses of all interfaces.

8

17.1 Legacy Series / Re: install my own ssl certificate

« on: May 21, 2017, 02:57:40 pm »

Go to "System" - "Trust" - "Certificates", then click on "add or import certificate". Copy+Paste certificate and private key in the empty fields, give your certificate a name and save.
Then go to "System" - "Settings" - "Administration". The Listbox under "SSL certificate" should now show your imported certificate. Select and save.