Topics

1

17.7 Legacy Series / SSH doesn't work

« on: October 09, 2017, 07:18:35 pm »

Dear Folks,

in the past it works, now it doesn't any more:
login to console via ssh.
When I try to login, the message appears:

Code: [Select]

"----------------------------------------------
|      Hello, this is OPNsense 17.7          |         @@@@@@@@@@@@@@@
|                                            |        @@@@         @@@@
| Website: https://opnsense.org/        |         @@@\\\   ///@@@
| Handbook: https://docs.opnsense.org/   |       ))))))))   ((((((((
| Forums: https://forum.opnsense.org/  |         @@@///   \\\@@@
| Lists: https://lists.opnsense.org/  |        @@@@         @@@@
| Code: https://github.com/opnsense  |         @@@@@@@@@@@@@@@
----------------------------------------------

This account is currently not available.".
In System/Settings/Administration there is in deed ssh access enabled with password login.

Any ideas how to solve this?

Cheers,
Andy

2

16.7 Legacy Series / [SOLVED] ssh login

« on: March 17, 2017, 09:16:25 pm »

Hi folks,

this might be a stupid question:
I have tried too many times to login via ssh apparently with a wrong password.
As a consequence ssh seems to block any login attempt now.
Does anybody know how I can unblock this ?

Code: [Select]

Received disconnect from 192.168.1.1 port 22:2: Too many authentication failures
Connection to defiant-nw closed by remote host.
Thanks in advance,
Andy

3

16.1 Legacy Series / [SOLVED] IGMP Proxy does not work any more after update to OPNsense 16.1.18

« on: July 05, 2016, 09:26:19 pm »

Hi Folks,

unfortunately I realized the igmp proxy fails to start after the update to 16.1.18.
With the previous version everything worked fine.

Now in the log the error message is:
igmpproxy[86381]: There must be at least 2 Vif's where one is upstream.

Thats very annoying - especially since I didn't change anything.

Any help would be very welcome!

Thanks a lot in advance
Andy

4

General Discussion / IPTV/multicast floods wifi interface

« on: May 17, 2016, 02:28:09 pm »

Dear experts,

I have a opnsense box as follows:
WAN: iptv/internet separated by vlans (via FTH)
LAN: local lan, including one IPTV receiver
WIFI: guest wifi, separate subnet from LAN. Wifi card is built into pfsense box

Everything is running well, except:
When the IPTV receiver is on and receives broadcast (via multicast and IGMP proxy in opnsense), then it seems that all multicasts are also sent to the wifi interface and not only to the LAN.
This obviously floods my guest wifi with useless data, as there is no IPTV receiver in the wifi.

I have no clue why the multicasts are also directed to the wifi and not only to the LAN, because in the IGMP proxy there is only entered the LAN subnet.

Has anybody an idea how I can block the multicast packets from entering the wifi interface?

Thanks for your help in advance,
andy

5

General Discussion / Regular Summary Report via Email

« on: January 11, 2016, 03:12:19 pm »

Dear Folks,
I wonder if there is any means to create a daily/weekly email report with opnsense, which conludes something like:
- internet (WAN) ip adress
- log file extract (with warnings etc)
- internet used traffic diagram/chart.
- service state (started/stopped)
- ...

Such a mail should be sent on regular basis but also event-driven, e.g. when the internet connection is re-established.

Does anybody know if this feature already exists and how it can be activated?

I configured the email notification tab, and it works, however I would like a regular summary report of the firewall`s key figures.

Thanks for your help in advance,
Andreas