1
15.7 Legacy Series / [SOLVED] KVM (oVirt) | Can ping public hostnames but can't browse
« on: August 20, 2015, 11:35:26 pm »
Hello all.
I'm very new to OPNsense. Have a weird issue with default install.
I have an oVirt (ovirt.org) server hosted in a datacenter. I'm trying to setup OPNsense as a "cloud" firewall.
my OPNsense virtual machine is configured with two nics WAN + LAN.
My WAN is configured with a Public IP.
My LAN is configured as 10.0.255.254/16
I have a few other virtual machines configured with one NIC on each which resides on the LAN network.
As stated with the default install of OPNsense with Outbound NAT set to auto I can ping public hostnames such as google.com or yahoo.com but when using a web browser on the LAN VMs I cannot access the internet.
From LAN VMs
using command line
ping google.com > success
ping yahoo.com > success
ping 8.8.8.8 > success
ping 209.244.0.3 > success
telnet google.com 80 > network not reachable
using web browser
URL google.com > page not found
URL 10.0.255.254 > OPNsense web page
From OPNsense
using shell
ping google.com > success
ping yahoo.com > success
ping 8.8.8.8 > success
ping 209.244.0.3 > success
telnet google.com 80 > connected
Am I missing a setting? I not sure why addresses can resolve via command line but are not actually reachable with a browser or telnet.
Any suggestions would be much appreciated.
I'm very new to OPNsense. Have a weird issue with default install.
I have an oVirt (ovirt.org) server hosted in a datacenter. I'm trying to setup OPNsense as a "cloud" firewall.
my OPNsense virtual machine is configured with two nics WAN + LAN.
My WAN is configured with a Public IP.
My LAN is configured as 10.0.255.254/16
I have a few other virtual machines configured with one NIC on each which resides on the LAN network.
As stated with the default install of OPNsense with Outbound NAT set to auto I can ping public hostnames such as google.com or yahoo.com but when using a web browser on the LAN VMs I cannot access the internet.
From LAN VMs
using command line
ping google.com > success
ping yahoo.com > success
ping 8.8.8.8 > success
ping 209.244.0.3 > success
telnet google.com 80 > network not reachable
using web browser
URL google.com > page not found
URL 10.0.255.254 > OPNsense web page
From OPNsense
using shell
ping google.com > success
ping yahoo.com > success
ping 8.8.8.8 > success
ping 209.244.0.3 > success
telnet google.com 80 > connected
Am I missing a setting? I not sure why addresses can resolve via command line but are not actually reachable with a browser or telnet.
Any suggestions would be much appreciated.