Topics

1

20.7 Legacy Series / Power fails do corrupt SD Cards and MSATA

« on: October 30, 2020, 08:51:20 am »

Hi,
I had a power fail with my APU3 running 20.7 Software. The Box did not come up.
The following errors are observed on the serial console.

CYLINDER GROUP 104: BAD MAGIC NUMBER
UNEXPECTED SOFT UPDATE INCONSISTENCY

REBUILD CYLINDER GROUP? yes

CYLINDER GROUP 105: BAD MAGIC NUMBER
UNEXPECTED SOFT UPDATE INCONSISTENCY

REBUILD CYLINDER GROUP? Yes


REBUILD CYLINDER GROUP? yes

** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
UNREF FILE  I=27  OWNER=root MODE=100644
SIZE=785656 MTIME=Oct 29 20:17 2020
RECONNECT? yes

NO lost+found DIRECTORY
CREATE? yes

CYLINDER GROUP 0: BAD MAGIC NUMBER
UNEXPECTED SOFT UPDATE INCONSISTENCY

REBUWARNING:  was not properly dismounted
ILD CYLINDER GROUP? yes

fsck_ufs: bad inode number 0 to ginode
pid 34421 (mktemp), uid 0 inumber 2 on : out of inodes

: create/symlink failed, no inodes free
mkdir: /tmp/.cdrom: No space left on device
mount_unionfs: /tmp/.cdrom: No such file or directory
mkdir: /tmp/.cdrom: No space left on device
mount_unionfs: /tmp/.cdrom: No such file or directory
mkdir: /tmp/.cdrom: No space left on device
mount_unionfs: /tmp/.cdrom: No such file or directory
mkdir: /tmp/.cdrom: No space left on device
mount_unionfs: /tmp/.cdrom: No such file or directory
mkdir: /tmp/.cdrom: No space left on device
mount_unionfs: /tmp/.cdrom: No such file or directory
mkdir: /tmp/.cdrom: No space left on device
mount_unionfs: /tmp/.cdrom: No such file or directory
mkdir: /tmp/.cdrom: No space left on device
mount_unionfs: /tmp/.cdrom: No such file or directory
PHP Warning:  file_put_contents(): Only 0 of 2086 bytes written, possibly out of free disk space in /usr/local/etc/rc.subr.d/recover on line 270
PHP Warning:  file_put_contents(): Only 0 of 820 bytes written, possibly out of free disk space in /usr/local/etc/rc.subr.d/recover on line 274
pwd_mkdb: /etc/pwd.db.tmp: No space left on device
pwd_mkdb: /etc/pwd.db.tmp: No space left on device
Setting hostuuid: e5a54693-1a22-11eb-83e7-000db957347c.
Setting hostid: 0x8878688a.
Configuring vt: blanktime.
pid 26310 (mktemp), uid 0 inumber 2 on : out of inodes

: create/symlink failed, no inodes free
mkdir: /var/etc: No space left on device
mkdir: /var/lib: No space left on device
chown: /var/lib/php/sessions: No such file or directory
chmod: /var/lib/php/sessions: No such file or directory
eval: cannot create /var/run/dmesg.boot: No space left on device
/usr/local/etc/rc.subr.d/crashdump: cannot create /tmp/ddb.conf: No space left on device
Configuring crash dump device: /dev/null
usage: ddb capture [-M core] [-N system] print
       ddb capture [-M core] [-N system] status
       ddb script scriptname
       ddb script scriptname=script
       ddb scripts
       ddb unscript scriptname
       ddb pathname
.ldconfig: mkstemp(/var/run/ld-elf.so.hints.227C1m): No space left on device
ELF ldconfig path: /lib /usr/lib /usr/local/lib /usr/local/lib/ipsec /usr/local/lib/perl5/5.30/mach/CORE
32-bit compatibility ldconfig path:


First I upgraded the APU3 to the latest BIOS. Still the same.
Booting from MSATA or SD Card -> same symptoms

This just happens with Power Loss. Its reproduceable.
Thanks for your hints
Jakob

2

Development and Code Review / CRON entry for WOL

« on: August 10, 2020, 12:03:21 pm »

Hi, would somebody help me to create a entry which sends a WOL packet via Cron to a device on my LAN.
Probably I just need to know where the WOL???.php ist located. Then I could call it trough Cron, would this work?
Thank you Jakob

3

20.7 Legacy Series / Zerotier stops intermittend (unstable) (20.1.7)

« on: June 02, 2020, 08:52:56 am »

Hi,
Zerotier seems to stop after a while (30min - 2h) In the Dashbord the Icon indcates red. Under VPN Zerotier the green "arrow flag" is on.  under Networks I get unable to retrieve network info.  Sometime I can restart zerotier via the shell "zerotier-one". Sometime "zerotier-one" just hangs. Checking via myzerotier shows that the OPNsense is not connectet to zerotier.
What can I do helping to get better info to find the root cause?
Jakob 

4

German - Deutsch / Kriege Portforwarding /NAT nicht hin

« on: May 29, 2020, 07:38:55 pm »

Hallo, bin am umsteigen auf OPNsense (OPNsense 20.1.7-amd64) von einem anderen Router/Firewall.
Ich möchte vom Internet via SSH auf ein internes Gerät zugreiffen.Trotz lesen und testen bin ich leider erfolglos.
Ich vermute, dass ich auf meine eigenen Füssen stehe. Im Anhang die beiden Screens von (FW Rules und NAT forward) Ich denke das ist das EInzige was für mein Vorhaben relevant ist.
Danke für Tips. Jakob

5

German - Deutsch / Router Artikel in ct no 22

« on: November 14, 2016, 11:05:01 am »

Hallo,
in neusten ct (22) erschienen auf den Seiten 120 und 128 zwei Artikel über "Home Built" Router.
Leider hat der Author Markus Stubbing OPNsense nicht in die Übersicht einbezogen. Ich werde Ihm ein Mail senden. Bin aber der Ansicht dass es nützlich wäre, wenn ein Hinweis auf OPNsense nicht nur aus einer Ecke kommen würde.
Jakob

6

16.7 Legacy Series / update failed

« on: April 21, 2016, 06:22:19 pm »

Hi, I am running OPNsense 16.7.a_651-amd64, FreeBSD 10.2-RELEASE-p13, OpenSSL 1.0.2g 1 Mar 2016
and tried to do a console update. I get the following error.
Regards Jakob
 
Enter an option: 12

This will automatically fetch all available updates, apply them,
and reboot if necessary.  Proceed with this action? [y/N]: y

Updating OPNsense repository catalogue...
OPNsense repository is up-to-date.
All repositories are up-to-date.
Updating OPNsense repository catalogue...
OPNsense repository is up-to-date.
All repositories are up-to-date.
Checking for upgrades (0 candidates): 100%
Processing candidates (0 candidates): 100%
Checking integrity... done (0 conflicting)
Your packages are up to date.
Checking integrity... done (0 conflicting)
Nothing to do.
Nothing to do.

Restarting webConfigurator...done.

!!!!!!!!!!!!! ATTENTION !!!!!!!!!!!!!!!!!
! A kernel/base upgrade is in progress. !
!  Please do not turn off the system.   !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Fetching kernel-16.1.8-amd64.txz... fetch: http://pkg.opnsense.org/sets/kernel-16.1.8-amd64.txz.sig: Not Found
failed

7

16.1 Legacy Series / [SOLVED] DNS question: What do I need that local hostnames are looked up first?

« on: March 02, 2016, 11:48:56 am »

Hi, I have a very stupid question.
I have a number of local host Hostnames configured under "Services: DHCP: Server"
If I try to access or ping one of this hosts by name I do not get response of this local host. But I do get response by the Server of my provider where my domain is registered. In case I enter this host name under "Services: DNS Forwarder" then the local host responds to the local address doing a ping.
My question is how can I achieve this without entering the host name twice? I have played with the the settings "Services: DNS Forwarder" (Static DHCP and Prefer DHCP) -> no change in behavior

BTW: It was working by "default" as desired with my m0n0wall.

 ping www.myregisterddomain.ch
PING www.myregisterddomain.ch (217.26.xx.yy): 56 data bytes
64 bytes from 217.26.xx.yy: icmp_seq=0 ttl=53 time=13.959 ms

ping kyocera1370
PING kyocera1370.myregisterddomain.ch (217.26.xx.yy): 56 data bytes
64 bytes from 217.26.xx.yy: icmp_seq=0 ttl=53 time=17.241 ms
(xx.yy are not provided
The local address of the kyocera1370 is 192.168.x.x

Thanks Jakob

8

15.7 Legacy Series / VLAN Trunk / tagging with VirtualBox

« on: November 10, 2015, 04:31:49 pm »

Hi, I am trying to set up my OPNsense as a virtual appliance in VirtualBox. (VirtualBox 5.0.8 on OS X 10.11.1)
The WAN IF traffic should reside in VLAN 10 and the LAN traffic in VALN 20.
But i am not able to "teach" VirtualBox to do VLAN tagging. ( at least I do not see with Wireshark that the traffic leaving  the MAC has VLAN Tags. ( Wireshark runs on other PC and captures the traffic on a mirrored switch port)
One of my suspicion is the Type of Adapter I need to select.
There are two PCnet Am79C973 and Am79C970A and Intel PRO/1000 MT Desktop,  Intel PRO/1000 T Server,  Intel PRO/1000 MT Server.
Googling around indicates that running under WIN requires a special driver. But I can't find anything which helps me with OS X.

Thank you for your advises Jakob

9

15.7 Legacy Series / Upgrade from 15.7.5 failed

« on: October 31, 2015, 02:00:55 pm »

Hi,
just got the APU2. Do to the reason APU2 does currently not boot from SD card I took a "old" mSATA SSD and started from there.
Now I try to upgrade to the newest OpnSense release I ran into the following problem.
Q: How can I force the box to upgrade?
Thanks Jakob

-----
Enter an option: 12
This will automatically fetch all available updates, apply them,
and reboot if necessary.  Proceed with this action? [y/N]: y

Updating OPNsense repository catalogue...
pkg: http://pkg.opnsense.org/FreeBSD:10:amd64/latest/meta.txz: No address record
repository OPNsense has no meta file, using default settings
pkg: http://pkg.opnsense.org/FreeBSD:10:amd64/latest/packagesite.txz: No address record
Unable to update repository OPNsense

*** Welcome to OPNsense 15.7.5 (amd64/OpenSSL) on APU2 ***

10

General Discussion / [SOLVED] how can I install a .img file on VirtualBox?

« on: October 22, 2015, 04:44:24 pm »

Hi,
what is the recommended way to install a image file on VirtualBox?
Is it possible to start directly with the OPNsense.....nano-amd64.img?
Thanks Jakob

11

15.7 Legacy Series / [SOLVED] Reload button for Firewall rule activation

« on: August 13, 2015, 08:41:22 pm »

Was there a reload (activate) button in the Firewall Rule page  in a earlier opnsense version? 
In the actual version i am forced to leave the Firewall Screen and go to Filter reload, then the new rule is going to be active.
Jakob

12

15.7 Legacy Series / successful 15.7.2 i386 nano Image installed on Alix 256MB

« on: July 14, 2015, 03:11:38 pm »

Hi,
may be this interesting for you.
Installed 15.7
upgraded via seral console to 15.7.2
(followed the instruction of Franco about disable and enable the RAM disk)

I have not made any performance test. The fist impression is that the reaction of the OPNsense screens seem to be slow.
Load average after 2 hours and playing with the WEBinterface
load average: 0.65, 0.71, 0.66

Jakob

root@OPNs-tst:~ # df -h
Filesystem            Size    Used   Avail Capacity  Mounted on
/dev/ufs/OPNsense0    936M    637M    224M    74%    /
devfs                 1.0K    1.0K      0B   100%    /dev
tmpfs                  73M     48K     73M     0%    /tmp
tmpfs                  88M     14M     73M    16%    /var
devfs                 1.0K    1.0K      0B   100%    /var/dhcpd/dev

root@OPNs-tst:~ # ps xauww
USER     PID  %CPU %MEM   VSZ   RSS TT  STAT STARTED      TIME COMMAND
root      11 100.0  0.0     0     8  -  RL   12:50PM 102:04.34 [idle]
root       0   0.0  0.0     0    80  -  DLs  12:50PM   0:55.20 [kernel]
root       1   0.0  0.2  9048   572  -  ILs  12:50PM   0:00.04 /sbin/init --
root       2   0.0  0.0     0     8  -  DL   12:50PM   0:00.00 [crypto]
root       3   0.0  0.0     0     8  -  DL   12:50PM   0:00.00 [crypto returns]
root       4   0.0  0.0     0    16  -  DL   12:50PM   0:00.12 [cam]
root       5   0.0  0.0     0     8  -  DL   12:50PM   0:04.78 [pf purge]
root       6   0.0  0.0     0     8  -  DL   12:50PM   0:00.00 [sctp_iterator]
root       7   0.0  0.0     0     8  -  DL   12:50PM   0:00.36 [pagedaemon]
root       8   0.0  0.0     0     8  -  DL   12:50PM   0:00.00 [vmdaemon]
root       9   0.0  0.0     0     8  -  DL   12:50PM   0:00.02 [idlepoll]
root      10   0.0  0.0     0     8  -  DL   12:50PM   0:00.00 [audit]
root      12   0.0  0.0     0    96  -  WL   12:50PM   0:11.28 [intr]
root      13   0.0  0.0     0     8  -  DL   12:50PM   0:00.00 [ng_queue]
root      14   0.0  0.0     0    24  -  DL   12:50PM   0:00.07 [geom]
root      15   0.0  0.0     0     8  -  DL   12:50PM   0:03.39 [rand_harvestq]
root      16   0.0  0.0     0    64  -  DL   12:50PM   0:00.19 [usb]
root      17   0.0  0.0     0     8  -  DL   12:50PM   0:00.00 [pagezero]
root      18   0.0  0.0     0    16  -  DL   12:50PM   0:00.22 [bufdaemon]
root      19   0.0  0.0     0     8  -  DL   12:50PM   0:00.27 [syncer]
root      20   0.0  0.0     0     8  -  DL   12:50PM   0:00.06 [vnlru]
root     187   0.0  5.8 23720 13340  -  Is   12:50PM   0:10.80 /usr/local/bin/python2.7 /usr/local/opnsense/service/configd.py
root     193   0.0  1.5  8976  3368  -  Is   12:50PM   0:00.02 /sbin/devd
root    6212   0.0  0.8 10140  1892  -  Ss   12:51PM   0:00.76 /usr/local/sbin/syslogd -s -c -c -l /var/dhcpd/var/run/log -P /var/run/syslog.pid -f /var/etc/syslog.conf
root    8016   0.0  1.8 12696  4092  -  Is   12:52PM   0:00.00 /usr/local/sbin/sshd
root   14422   0.0  0.8 10084  1816  -  Is   12:53PM   0:00.07 /usr/sbin/cron -s
root   15876   0.0  0.8 10160  1836  -  Is   12:52PM   0:00.01 dhclient: vr1 [priv] (dhclient)
_dhcp  21585   0.0  0.8 10160  1912  -  Is   12:52PM   0:00.01 dhclient: vr1 (dhclient)
root   28939   0.0  0.8 10200  1880  -  Ss   12:52PM   0:01.54 /usr/local/sbin/filterlog -i pflog0 -p /var/run/filterlog.pid
root   38498   0.0  0.8 10136  1736  -  Is   12:52PM   0:00.00 /usr/sbin/inetd -wW -R 0 -a 127.0.0.1 /var/etc/inetd.conf
root   39040   0.0  0.7  5832  1512  -  I     2:42PM   0:00.00 sleep 60
root   51805   0.0  2.2 12976  5092  -  S    12:52PM   0:01.58 /usr/local/sbin/lighttpd -f /var/etc/lighty-webConfigurator.conf
root   51845   0.0  0.7  9924  1548  -  Is   12:53PM   0:00.00 minicron 240 /var/run/ping_hosts.pid /usr/local/sbin/ping_hosts.sh
root   52062   0.0  6.4 30648 14584  -  Is   12:52PM   0:00.29 /usr/local/bin/php-cgi
root   52201   0.0  0.7  9924  1560  -  I    12:53PM   0:00.01 minicron: helper /usr/local/sbin/ping_hosts.sh  (minicron)
root   52236   0.0  0.7  9924  1548  -  Is   12:53PM   0:00.00 minicron 3600 /var/run/expire_accounts.pid /usr/local/etc/rc.expireaccounts
root   52733   0.0  0.7  9924  1556  -  I    12:53PM   0:00.00 minicron: helper /usr/local/etc/rc.expireaccounts  (minicron)
root   52875   0.0  0.7  9924  1548  -  Is   12:53PM   0:00.00 minicron 86400 /var/run/update_alias_url_data.pid /usr/local/etc/rc.update_alias_url_data
root   53334   0.0  0.7  9924  1556  -  I    12:53PM   0:00.00 minicron: helper /usr/local/etc/rc.update_alias_url_data  (minicron)
root   53336   0.0  6.3 30648 14360  -  Is   12:52PM   0:00.27 /usr/local/bin/php-cgi
nobody 54968   0.0  1.5 10988  3332  -  I    12:52PM   0:00.05 /usr/local/sbin/dnsmasq --all-servers --rebind-localhost-ok --stop-dns-rebind --dns-forward-max=5000 --cache-size=10000 --local-ttl=1
root   57834   0.0  6.4 30648 14584  -  I    12:52PM   0:00.00 /usr/local/bin/php-cgi
root   58344   0.0  6.3 30648 14360  -  I    12:52PM   0:00.00 /usr/local/bin/php-cgi
root   60052   0.0  0.7 10036  1700  -  I    12:53PM   0:00.02 /usr/libexec/getty Pc ttyv0
root   60273   0.0  0.7 10036  1700  -  I    12:53PM   0:00.02 /usr/libexec/getty Pc ttyv1
root   60506   0.0  0.7 10036  1700  -  I    12:53PM   0:00.02 /usr/libexec/getty Pc ttyv2
root   60775   0.0  0.7 10036  1700  -  I    12:53PM   0:00.02 /usr/libexec/getty Pc ttyv3
root   60945   0.0  0.7 10036  1700  -  I    12:53PM   0:00.02 /usr/libexec/getty Pc ttyv4
root   61002   0.0  0.7 10036  1700  -  I    12:53PM   0:00.02 /usr/libexec/getty Pc ttyv5
root   61332   0.0  0.7 10036  1700  -  I    12:53PM   0:00.02 /usr/libexec/getty Pc ttyv6
root   61437   0.0  0.7 10036  1700  -  I    12:53PM   0:00.02 /usr/libexec/getty Pc ttyv7
dhcpd  61645   0.0  4.0 16224  9224  -  Is   12:52PM   0:00.01 /usr/local/sbin/dhcpd -user dhcpd -group dhcpd -chroot /var/dhcpd -cf /etc/dhcpd.conf -pf /var/run/dhcpd.pid vr0 vr2
root   62055   0.0  0.8 10212  1760  -  Is   12:53PM   0:00.02 /usr/local/sbin/sshlockout_pf 15
root   63275   0.0  0.8 10020  1812  -  S    12:52PM   0:00.80 /usr/local/sbin/radvd -p /var/run/radvd.pid -C /var/etc/radvd.conf -m syslog
root   85982   0.0  1.9 12960  4404  -  S    12:52PM   0:00.24 /usr/local/sbin/lighttpd -f /var/etc/lighty-test-CaptivePortal.conf
root   86350   0.0  6.9 30648 15684  -  Is   12:52PM   0:00.29 /usr/local/bin/php-cgi
root   86619   0.0  0.7  9924  1540  -  Is   12:52PM   0:00.00 /usr/local/bin/minicron 60 /var/run/cp_prunedb_test.pid /usr/local/etc/rc.prunecaptiveportal test
root   86719   0.0  0.7  9924  1552  -  I    12:52PM   0:00.03 minicron: helper /usr/local/etc/rc.prunecaptiveportal test (minicron)
root   87662   0.0  6.9 30648 15684  -  Is   12:52PM   0:00.29 /usr/local/bin/php-cgi
root   87848   0.0  6.9 30648 15684  -  Is   12:52PM   0:00.29 /usr/local/bin/php-cgi
root   88086   0.0  6.9 30648 15684  -  Is   12:52PM   0:00.29 /usr/local/bin/php-cgi
root   88354   0.0  6.9 30648 15684  -  I    12:52PM   0:00.00 /usr/local/bin/php-cgi
root   88480   0.0  6.9 30648 15684  -  I    12:52PM   0:00.00 /usr/local/bin/php-cgi
root   88757   0.0  6.9 30648 15684  -  I    12:52PM   0:00.00 /usr/local/bin/php-cgi
root   88937   0.0  6.9 30648 15684  -  I    12:52PM   0:00.00 /usr/local/bin/php-cgi
root   89208   0.0  6.9 30648 15684  -  I    12:52PM   0:00.00 /usr/local/bin/php-cgi
root   89282   0.0  6.9 30648 15684  -  I    12:52PM   0:00.00 /usr/local/bin/php-cgi
root   89523   0.0  6.9 30648 15684  -  I    12:52PM   0:00.00 /usr/local/bin/php-cgi
root   89540   0.0  6.9 30648 15684  -  I    12:52PM   0:00.00 /usr/local/bin/php-cgi
root   90318   0.0  5.7 12924 12952  -  Ss   12:52PM   0:01.04 /usr/local/sbin/ntpd -g -c /var/etc/ntpd.conf -p /var/run/ntpd.pid
root   97229   0.0  0.8 10432  1928  -  Is   12:53PM   0:02.63 /bin/sh /var/db/rrd/updaterrd.sh
root   39555   0.0  0.8 10176  1868 u0  R+    2:42PM   0:00.01 ps xauww
root   61738   0.0  1.0 10424  2184 u0  Is   12:53PM   0:00.21 login [pam] (login)
root   62593   0.0  0.8 10432  1912 u0  I     1:25PM   0:00.02 /bin/sh /usr/local/etc/rc.initial
root   63127   0.0  1.3 10796  2884 u0  S     1:25PM   0:00.07 /bin/csh

root@OPNs-tst:~ # top
last pid: 39887;  load averages:  0.72,  0.70,  0.60 up 0+01:52:3314:42:55
54 processes:  1 running, 53 sleeping
CPU:     % user,     % nice,     % system,     % interrupt,     % idle
Mem: 9516K Active, 93M Inact, 39M Wired, 12M Buf, 77M Free
Swap:

  PID USERNAME    THR PRI NICE   SIZE    RES STATE    TIME    WCPU COMMAND
  187 root          1  20    0 23720K 13340K accept   0:11   0.00% python2.7
97229 root          1  52    0 10432K  1928K wait     0:03   0.00% sh
51805 root          1  20    0 12976K  5092K kqread   0:02   0.00% lighttpd
28939 root          1  20    0 10200K  1880K bpf      0:02   0.00% filterlog
90318 root          1  20    0 12924K 12952K select   0:01   0.00% ntpd
63275 root          1  20    0 10020K  1812K select   0:01   0.00% radvd
 6212 root          1  20    0 10140K  1892K select   0:01   0.00% syslogd
86350 root          1  52    0 30648K 15684K wait     0:00   0.00% php-cgi
87662 root          1  52    0 30648K 15684K wait     0:00   0.00% php-cgi
88086 root          1  52    0 30648K 15684K wait     0:00   0.00% php-cgi
87848 root          1  52    0 30648K 15684K wait     0:00   0.00% php-cgi
52062 root          1  52    0 30648K 14584K wait     0:00   0.00% php-cgi
53336 root          1  52    0 30648K 14360K wait     0:00   0.00% php-cgi
85982 root          1  20    0 12960K  4404K kqread   0:00   0.00% lighttpd
61738 root          1  21    0 10424K  2184K wait     0:00   0.00% login
63127 root          1  20    0 10796K  2884K pause    0:00   0.00% csh
14422 root          1  20    0 10084K  1816K nanslp   0:00   0.00% cron
54968 nobody        1  20    0 10988K  3332K select   0:00   0.00% dnsmasq 0.72,  0.70,  0.60 up 0+01:52:3514:42:57
 0.0 0.0 0.5 0.599.0608

13

15.7 Legacy Series / [SOLVED] Cant restart DHCP Server

« on: July 03, 2015, 01:23:55 pm »

Hi,
I did the upgrade last Night which went fine. One hour ago I realized a PC did not receive anymore a IP address from the DHCP server. Looking into the OPNsense dashboard I realized the DHCP Server was down. First I restarted the Service, which did not help. I restarted the Router, did not help either.
The log does not say a lot. What can I do to provide you with details to get to the root cause.
(I have put 15.1.12 in place)

One thing I like to say. This is the first time since March my OPNsense let me down. Absolutely great work, gratulations to the team.
Regards Jakob

Jul 3 12:47:01   dhcpd: exiting.
Jul 3 12:47:01   dhcpd:
Jul 3 12:47:01   dhcpd: the README file.
Jul 3 12:47:01   dhcpd: send them to the appropriate mailing list as described in
Jul 3 12:47:01   dhcpd: help directly to the authors of this software - please
Jul 3 12:47:01   dhcpd: Please do not under any circumstances send requests for
Jul 3 12:47:01   dhcpd:
Jul 3 12:47:01   dhcpd: submitting bug reports and requests for help.
Jul 3 12:47:01   dhcpd: mailing list, please read the section on the README about
Jul 3 12:47:01   dhcpd: If you intend to request help from the dhcp-bugs at isc.org
Jul 3 12:47:01   dhcpd: yet read the README, please read it before requesting help.
Jul 3 12:47:01   dhcpd: If you did get this software from ftp.isc.org and have not
Jul 3 12:47:01   dhcpd:
Jul 3 12:47:01   dhcpd: requesting help.
Jul 3 12:47:01   dhcpd: get the latest from ftp.isc.org and install that before
Jul 3 12:47:01   dhcpd: If you did not get this software from ftp.isc.org, please
Jul 3 12:47:01   dhcpd:
Jul 3 12:47:01   dhcpd: no such user: dhcpd
Jul 3 12:47:01   dhcpd: For info, please visit https://www.isc.org/software/dhcp/
Jul 3 12:47:01   dhcpd: All rights reserved.
Jul 3 12:47:01   dhcpd: Copyright 2004-2015 Internet Systems Consortium.
Jul 3 12:47:01   dhcpd: Internet Systems Consortium DHCP Server 4.2.8

14

General Discussion / [SOLVED] Installing OPNsense nano image without serial cable connection ?

« on: June 27, 2015, 05:54:47 pm »

Hi, what are the reasons for the current requirement the image install needs initial setup with a serial connection? Considering the fact that newer PC do not have anymore a serial interface it would help in this situations to enable a installation. My suggestion is to "preset" the first Interface with a fixed IP address.
I am eager to hear your opinions.
Jakob

15

15.1 Legacy Series / Captive Portal redirect behavior

« on: June 15, 2015, 11:56:53 am »

Hi, I need some advice.
Using the default Landing page of OPNsense i get after the successful login either the page success or if selected the popup window, using iphone or iPad. In case I do the same with a PC Browser then I get the preselected default page of the browser. If I do the same on the monowall captive Portal I get to the browsers default URL.

Observation / further explanation: Using iOS devices the user has to select first in the WLAN SSID. Then after a few seconds the CP shows up, where I enter the Voucher code. With a PC in most cases ( think this could depend on the PC settings) the user selects first the WLAN SSID and then as the next step the user open the browser where he need to enter the Code. After this step the default page of the browser shows up.

Q: Is there a parameter in the CP settings which determines this behavior. using iOS mobile devices. (The CP settings of OPNsense allow more options than the monowall CP.)
Thank you for your response. Jakob