"
On a dedicated box with SPF+ ports, no VLANS.
I have setup two firewalls on same hw, but I struggled with HA and loss of LAN-connection on this 2nd.
I found out that the problem is that LAG doesn't work on this 2nd fw.
I have removed the two ports from the LACP-lag on the switch - and also removed LAN interface and the lagg on OPNSense. Then I activated one and one port, to verify it was ix2 and ix3 that are correct. I enabled each interface one and one. In both directions. I deleted the interface for each time also. So when I added ix2 and ix3 to lag, attached lagg0 to LAN, I was 100% sure it was correct cables. It shows green in Web GUI for the LAG. I have also created allow-all rule in pfSense fw on this LAN-interface and rebooted.
No matter what I do, it doesn not estabilish connection. What can be wrong? The switch says "susp" on both ports in the LACP-lag there and Dev ID 0000000.
All is working outside the lag...
It simply says this:
Interface TenGigabitEthernet 1/0/10 suspended: LACP currently not enabled on the remote port.
2024-11-28
(5)Notifications
LACP
SUSPEND
Interface TenGigabitEthernet 2/0/10 suspended: LACP currently not enabled on the remote port.
2024-11-28
I have setup two firewalls on same hw, but I struggled with HA and loss of LAN-connection on this 2nd.
I found out that the problem is that LAG doesn't work on this 2nd fw.
I have removed the two ports from the LACP-lag on the switch - and also removed LAN interface and the lagg on OPNSense. Then I activated one and one port, to verify it was ix2 and ix3 that are correct. I enabled each interface one and one. In both directions. I deleted the interface for each time also. So when I added ix2 and ix3 to lag, attached lagg0 to LAN, I was 100% sure it was correct cables. It shows green in Web GUI for the LAG. I have also created allow-all rule in pfSense fw on this LAN-interface and rebooted.
No matter what I do, it doesn not estabilish connection. What can be wrong? The switch says "susp" on both ports in the LACP-lag there and Dev ID 0000000.
All is working outside the lag...
It simply says this:
Interface TenGigabitEthernet 1/0/10 suspended: LACP currently not enabled on the remote port.
2024-11-28
(5)Notifications
LACP
SUSPEND
Interface TenGigabitEthernet 2/0/10 suspended: LACP currently not enabled on the remote port.
2024-11-28
