Show Posts
1
23.1 Legacy Series / Headless hardware not booting installer further than EFI frambuffer information
« on: July 29, 2023, 12:30:05 am »
Hi all,
I've had OPNSense running on an AMD Ryzen™ Embedded V1807B with Radeon™ Vega 11 Graphics - https://www.sapphiretech.global/en/commercial/fs-fp5#Specification for quite some time now... thanks btw!
The V1807B SoC does have a gpu && video ports.
I have new hardware I'm trying to setup but running into issues where the boot apparently just freezes.
https://photos.app.goo.gl/HSZXf7o3jQgtxcP46
This is using "serial" type media of 23.1 "Quintessential Quail"
Console is being accessed over USB serial - all seems to be working fine there... I've tried the DVD iso media also and they symptoms are the same.
Hardware is: https://photos.app.goo.gl/UfD2cHisR9YmykgQ7
https://www.solid-run.com/fanless-computers/bedrock-v3000-basic/#specifications
AMD Ryzen™ Embedded V3C48 8C/16T/45W is a Zen3+ 6nm
There are no PCIE / GPU ports. As seen, it's a dedicated bit of networking type kit.
I note that "EFI framebuffer information" is all nulls - I think that would be expected as the hardware is headless|USB Serial console access only.
Unless "EFI framebuffer information" is not video frame buffer references something else?
Can anyone please assist - I've only found things like https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=209821 where there was no information, that I see at least, for me to chase?
I've had OPNSense running on an AMD Ryzen™ Embedded V1807B with Radeon™ Vega 11 Graphics - https://www.sapphiretech.global/en/commercial/fs-fp5#Specification for quite some time now... thanks btw!
The V1807B SoC does have a gpu && video ports.
I have new hardware I'm trying to setup but running into issues where the boot apparently just freezes.
https://photos.app.goo.gl/HSZXf7o3jQgtxcP46
This is using "serial" type media of 23.1 "Quintessential Quail"
Console is being accessed over USB serial - all seems to be working fine there... I've tried the DVD iso media also and they symptoms are the same.
Hardware is: https://photos.app.goo.gl/UfD2cHisR9YmykgQ7
https://www.solid-run.com/fanless-computers/bedrock-v3000-basic/#specifications
AMD Ryzen™ Embedded V3C48 8C/16T/45W is a Zen3+ 6nm
There are no PCIE / GPU ports. As seen, it's a dedicated bit of networking type kit.
I note that "EFI framebuffer information" is all nulls - I think that would be expected as the hardware is headless|USB Serial console access only.
Unless "EFI framebuffer information" is not video frame buffer references something else?
Can anyone please assist - I've only found things like https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=209821 where there was no information, that I see at least, for me to chase?