"
Hi,
I'm somewhat new to OPNSense, so please, do consider user mistake might be an option at any step of the config.
Got a bridge set on multiple interfaces for my 192.168.1.0/24 LAN.
Got a WAN configured using PPoE.
This worked well, and I was able to make NAT port forwarding without issues.
Problem started when I subscribed to a /29 of public IPs from my internet provider (OVH, FTTH).
The intent is to redirect each public IP to a local IP, in order to have all ports available.
I've tried many configurations, and got it working, but only 50 to 70% of the time.
I've got a test web page on one of the additional IPs visible here http://109.190.103.26/ (no problem to share it, it's a public server), if you refresh it (ctrl + F5) several times, you'll likely encounter timeouts. Same goes with SSH.
I wonder if that is a bug or if I'm doing something wrong. I've been trying everything for a whole day and couldn't find a solution.
Current config:
- One virtual IP on WAN set as /32 and gateway from the /29 as advised by my ISP
- Setup a One-to-one NAT rule : Exernal IP 109.190.103.26/32, Internal IP 192.168.1.16, Destination IP * (Any)
- Firewall allows all incoming connections until I make sure basic config works
At this point I'm stuck, I don't know how to diagnose this kind of random issue.
Do you have any idea of what to try or to look for?
Thank you
I'm somewhat new to OPNSense, so please, do consider user mistake might be an option at any step of the config.
Got a bridge set on multiple interfaces for my 192.168.1.0/24 LAN.
Got a WAN configured using PPoE.
This worked well, and I was able to make NAT port forwarding without issues.
Problem started when I subscribed to a /29 of public IPs from my internet provider (OVH, FTTH).
The intent is to redirect each public IP to a local IP, in order to have all ports available.
I've tried many configurations, and got it working, but only 50 to 70% of the time.
I've got a test web page on one of the additional IPs visible here http://109.190.103.26/ (no problem to share it, it's a public server), if you refresh it (ctrl + F5) several times, you'll likely encounter timeouts. Same goes with SSH.
I wonder if that is a bug or if I'm doing something wrong. I've been trying everything for a whole day and couldn't find a solution.
Current config:
- One virtual IP on WAN set as /32 and gateway from the /29 as advised by my ISP
- Setup a One-to-one NAT rule : Exernal IP 109.190.103.26/32, Internal IP 192.168.1.16, Destination IP * (Any)
- Firewall allows all incoming connections until I make sure basic config works
At this point I'm stuck, I don't know how to diagnose this kind of random issue.
Do you have any idea of what to try or to look for?
Thank you
