"
UPDATE:
There are several posts on Bungie's forums about this issue for both OPNSense and pfsense.
Please see here:https://www.bungie.net/en/Forums/Post/254054012 and https://www.bungie.net/en/Forums/Post/262675756?sort=0&page=0
Is there some configuration changes that can be made to improve the compatibility with this game?
This person states the following:
On the main configuration page, the importation options are below:
Start UPnP and NAT-PMP service = enabled
Enable UPnP functionality = enabled
Enable NAT-PMP functionality = enabled
Enable IGDv1 mode = enabled (The important option, Destiny 2 does not like IGDv2)
Port = 0 (Allows automatic port selection)
On the Advanced Configuration page, you must add the following options:
Announced Serial Number : <Any integer you want>
Announced Model Number : <Any integer you want>
Presentation URL : http://<ip-address-of-router>;
My question is, how do we make miniupnpd run in IGDv1 mode?
They also stated the following:
Plume is running OpenWRT under the hood and also uses miniupnpd, but there are some minor differences in how it handles uuids; I'm going to do a deep dive of the miniupnpd.conf file later and see if I can get miniupnpd.conf on pfsense to match exactly what OpenWRT is doing and test that to see if Destiny likes it any better.
There are several posts on Bungie's forums about this issue for both OPNSense and pfsense.
Please see here:https://www.bungie.net/en/Forums/Post/254054012 and https://www.bungie.net/en/Forums/Post/262675756?sort=0&page=0
Is there some configuration changes that can be made to improve the compatibility with this game?
This person states the following:
On the main configuration page, the importation options are below:
Start UPnP and NAT-PMP service = enabled
Enable UPnP functionality = enabled
Enable NAT-PMP functionality = enabled
Enable IGDv1 mode = enabled (The important option, Destiny 2 does not like IGDv2)
Port = 0 (Allows automatic port selection)
On the Advanced Configuration page, you must add the following options:
Announced Serial Number : <Any integer you want>
Announced Model Number : <Any integer you want>
Presentation URL : http://<ip-address-of-router>;
My question is, how do we make miniupnpd run in IGDv1 mode?
They also stated the following:
Plume is running OpenWRT under the hood and also uses miniupnpd, but there are some minor differences in how it handles uuids; I'm going to do a deep dive of the miniupnpd.conf file later and see if I can get miniupnpd.conf on pfsense to match exactly what OpenWRT is doing and test that to see if Destiny likes it any better.
