Topics

[The gateway address "" does not lie within one of the chosen interface's IPv4 subnets.]

Hey,

I need some help to enable 1:1 NAT. I have 2 x IP from my service provider but I am unable to correctly set up 1:1 NAT.

I have a feeling it is a gateway issue.

The 2 IP's are way different and don't share the same subnet. like so 119.18.15.* and the second is 159.196.45.*

Most places say to set the WAN as static but when I do this the gateway won't automatically set up and manually setting it won't apply. When in DHCP it the gateway finishes.1 I try to set this manually in the gateway but it does not allow if so have turned WAN back to DHCP so the internet will work.

So onto the second IP.

I set a virtual IP with the IP they provided. Then set up a gateway I tried to set it with the .1 but says The gateway address "" does not lie within one of the chosen interface's IPv4 subnets.

If I set the gateway address the same as the IP address this works and says its online.

In firewall NAT 1:1 I set WAN the External IP service provider set and my internal IP I want to use that address for. Enable it all and save.

I get IPv6 address but no IPv4 address when set like this.

I know the virtual IP says proxy ARP I tries IPalias first was seeing if that matters

Hello,

I have a question. Me and the wife play the same game and obviously require the same ports to be forwarded to 2 different LAN addresses which does not work (unless some one can inform me how). I have tried this and searched it up and have had no luck.

I was thinking if I get a second external IP (WAN) from the service provider can I have one machine run off one external IP and the other off the other external IP, Would this be possible to then open both ports to both machines at the same time???

I called the service provider and they see no reason why I can not get both open now but you know what they are like. I asked if there is an option to have another external IP added he said they are able to on a buisness plan which I would have to switch over.

So before I waste my time and money I thought I would ask the brains in here. Is one of these options doable? or am I stuck with a strict NAT while my wife has open?

Now I have run wireguard on a VPS for a few years and this works. The problem now is the game shadow bans all the VPS servers I have tried resulting in games taking 5 mins to find than having 300ms ping. Turn it off straight into a game 12ms ping. I have tried all the companies I can find to see if maybe one will work but it won't.

Hello,

I am having trouble to get ports open with OPNsense, I created an alias for the different machines then set up the port forwarding in the NAT part. Have attached a screenshot of the setup please tell me what is wrong. I have tried WAN address, WAN net, This firewall and LAN address in destination none of them seem to work ports still stay closed and get strict NAT while gaming.

Any help would be good. Thanks