OPNsense
  • Home
  • Help
  • Search
  • Login
  • Register

  • OPNsense Forum »
  • Profile of nemric »
  • Show Posts »
  • Topics
  • Profile Info
    • Summary
    • Show Stats
    • Show Posts...
      • Messages
      • Topics
      • Attachments

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

  • Messages
  • Topics
  • Attachments

Topics - nemric

Pages: [1]
1
22.1 Legacy Series / Question relative to dnsmasq
« on: February 02, 2022, 03:39:36 pm »
Hi,

I was using dnsmasq as a tftp boot server, after update to 22.1, and going back to 21.7 and back again to 22.1 I've lost all my files and so on ... not the real problem

I'd like to set it up again but it seems that custom-options are not available anymore (I knew that, it was said in an previous update) and it seems that /usr/local/etc/dnsmasq.conf isn't read. (didn't try yet but all lines are commented out)

It seems that conf is read from the config file from opnsense and executed with arguments
e.g.
Code: [Select]
/usr/local/sbin/dnsmasq --rebind-localhost-ok --stop-dns-rebind -H /var/etc/dnsmasq-hosts --port=5353 ...
My concern is about how to "hack" and set custom values to dnsmasq.conf (or elsewhere) to set my tftp server on again ?

2
22.1 Legacy Series / Can't write image to USB key
« on: January 28, 2022, 02:49:00 pm »
Hi,
I ran update yesterday but I had a problem, well, went back to 21.7.
I've downloaded OPNsense-21.7.1-OpenSSL-vga-amd64.img.bz2 and write it to my usb key with Rufus, everything was right
Now I'd like to do the same for testing purpose with 22.1 but writing USB key fail with all images
Try it again with 21.7 and it worked so is there a problem with the new image ?

It's not the first time it fails like that with opnsense images, I can't remember the last time it happened but it happened

Did someone make it work ?

3
22.1 Legacy Series / DHCP send option not sent
« on: January 27, 2022, 09:22:44 pm »
Hi,

I've upgraded today for the new release, and my vlan vlan don't go online.

my config :
vlan100 on em1
assigned to an interface with options :
- spoof mac : xx:xx:xx:xx...
- send option : vendor-class-identifier "BYGTELIAD"

I've run a packet capture and only options :
53 DHCP message
50 requested ip
61 client identifier
12 host name
55 parameter request list
255 END

are sent

Option 60 vendor-class-identifier is missing

It was working like a charm before upgrade so it seems that it's a regression

4
19.7 Legacy Series / move /tmp and /var to USB key
« on: August 13, 2019, 07:04:05 pm »
Hi,

I tri to setup /var and /tmp to an USB key formatted as

Code: [Select]
root@xxx:/etc # gpart show da0
=>     40  7866288  da0  GPT  (3.8G)
       40  4194304    1  freebsd-ufs  (2.0G)
  4194344  3671984    2  freebsd-ufs  (1.8G)

My fstab looks like :

Code: [Select]
root@xxx:/etc # cat /etc/fstab
# Device                Mountpoint      FStype  Options         Dump    Pass#
/dev/ufs/OPNsense       /               ufs     rw,noatime      1       1
/dev/da0p1              /var            tmpfs   rw              2       2
/dev/da0p2              /tmp            tmpfs   rw              2       2

Code: [Select]
root@xxx:/tmp # df -a -H
Filesystem           Size    Used   Avail Capacity  Mounted on
/dev/ufs/OPNsense    2.0G    1.0G    837M    55%    /
devfs                1.0k    1.0k      0B   100%    /dev
tmpfs                1.8G     24M    1.8G     1%    /var
tmpfs                1.8G    184k    1.8G     0%    /tmp
devfs                1.0k    1.0k      0B   100%    /var/dhcpd/dev
devfs                1.0k    1.0k      0B   100%    /var/unbound/dev

Capacities in "df" are not same a defined in "gpart"

Is there a way to make it work ?
How to be sure that /tmp and /var are well mounted on /dev/da0p1 ans /dev/de0p2 ?

thanks :)

5
General Discussion / Why discontinuing I386 support ?
« on: May 13, 2019, 04:31:28 pm »
Hie,

Just made update of my opnsense to 19.1.7 release and guess what ?

Quote from: OPNsense 19.1.7 released
"And speaking of 20.1: This is the first of many reminders that 20.1 will discontinue the i386 (Intel 32 Bit) franchise as discussed a number of times within the community over the years. Our hope is that ARM64 will make a viable replacement. But that is for another time."

I went to Opnsense from Pfsense thanks to I386 support, my hardware is a low power MSI 9A19 with Atom N270 32 bit that works great and support will be discontinued in 6 months, I'm so disappointed ...

I don't understand that choice of dropping old hardware support ... Is their some hope for having a kind of LTS on 19.x.x version ?

Pages: [1]
OPNsense is an OSS project © Deciso B.V. 2015 - 2023 All rights reserved
  • SMF 2.0.19 | SMF © 2021, Simple Machines
    Privacy Policy
    | XHTML | RSS | WAP2