Topics

1

19.1 Legacy Series / [SOLVED] Hotplug event detected

« on: February 06, 2019, 03:01:43 pm »

Hi,

I set up a firewall in bridge (transparent) mode, everything works, but when I add rules to the firewall, after a while, my ports are disabled and the bridge disappears.

log:

Code: [Select]

Feb 6 19:16:47 opnsense: /usr/local/etc/rc.newwanip: Failed to detect IP for 212_WAN[opt4]
Feb 6 19:16:47 opnsense: /usr/local/etc/rc.newwanip: On (IP address: ) (interface: 212_WAN[opt4]) (real interface: igb5).
Feb 6 19:16:47 opnsense: /usr/local/etc/rc.newwanip: IP renewal is starting on 'igb5'
Feb 6 19:16:47 opnsense: /usr/local/etc/rc.linkup: Hotplug event detected for 212_WAN(opt4) but ignoring since interface is configured with static IP (0.0.0.0 ::)
Feb 6 19:16:47 kernel: igb5: link state changed to UP
Feb 6 19:16:46 opnsense: /usr/local/etc/rc.newwanip: Failed to detect IP for 178_WAN[opt2]
Feb 6 19:16:46 opnsense: /usr/local/etc/rc.newwanip: On (IP address: ) (interface: 178_WAN[opt2]) (real interface: igb3).
Feb 6 19:16:46 opnsense: /usr/local/etc/rc.newwanip: IP renewal is starting on 'igb3'
Feb 6 19:16:46 opnsense: /usr/local/etc/rc.linkup: Hotplug event detected for 178_WAN(opt2) but ignoring since interface is configured with static IP (0.0.0.0 ::)
Feb 6 19:16:46 kernel: igb3: link state changed to UP
Feb 6 19:16:43 opnsense: /usr/local/etc/rc.linkup: Hotplug event detected for 212_WAN(opt4) but ignoring since interface is configured with static IP (0.0.0.0 ::)
Feb 6 19:16:43 opnsense: /usr/local/etc/rc.linkup: Hotplug event detected for 178_WAN(opt2) but ignoring since interface is configured with static IP (0.0.0.0 ::)
Feb 6 19:16:43 kernel: igb5: link state changed to DOWN
Feb 6 19:16:43 kernel: igb3: link state changed to DOWN
Feb 6 18:06:11 send_telemetry.py: telemetry data collected 61802 records in 11.09 seconds @2019-02-06 12:06:00.575861
Feb 6 17:53:00 send_telemetry.py: telemetry data collected 783 records in 0.16 seconds @2019-02-06 11:53:00.570842
Feb 6 17:51:00 send_telemetry.py: telemetry data collected 27 records in 0.02 seconds @2019-02-06 11:50:37.409144
Feb 6 17:49:00 send_telemetry.py: telemetry data collected 31 records in 0.03 seconds @2019-02-06 11:48:34.087590
firewall rules: http://joxi.ru/Q2KxDVQCLb181A
interface: http://joxi.ru/E2pkWVqi7OQEym


When these rules are disabled everything works!
After switching on after 20-30 minutes, the ports are disabled.

2

19.1 Legacy Series / Firewall transparent mode

« on: February 04, 2019, 08:22:54 am »

Hi,

I set up opnsense in transparent mode
According to the documentation of the firewall rules I have to configure on the bridge.
https://wiki.opnsense.org/manual/how-tos/transparent_bridge.html

When I set up rules that allow everything, it works, but if I try to create another rule, it doesn't work, for example

work:


not work:

1,2 rules ignoring

OPNsense installed version 19.1
All settings made on a clean system.