Topics

1

21.1 Legacy Series / Traffic top talkers in and out same value

« on: July 02, 2021, 04:16:34 pm »

Under Trafic -> Reporting and "Top Talkers" the total in and out have the same value

That can't be right

Im on the latest version

LAN   192.168.1.47   0b   0b   6.63 kb   688.0 b   7 KB   7 KB   2021-07-02T14:14:27.225Z
LAN   192.168.1.49   0b   0b   8.14 kb   8.35 kb   5 KB   5 KB   2021-07-02T14:14:27.225Z
LAN   192.168.1.5   0b   0b   2.99 kb   1.82 kb   2 KB   2 KB   2021-07-02T14:14:27.225Z
LAN   192.168.1.46   0b   0b   3.75 kb   14.1 kb   5 KB   5 KB   2021-07-02T14:14:25.008Z
LAN   192.168.1.3   0b   0b   208.0 b   704.0 b   280 Bytes   280 Bytes   2021-07-02T14:14:25.008Z
LAN   192.168.1.26   0b   0b   107.06 kb   77.8 kb   56 KB   56 KB   2021-07-02T14:14:22.710Z
LAN   192.168.1.24   0b   0b   360.0 b   208.0 b   350 Bytes   350 Bytes   2021-07-02T14:14:18.111Z
LAN   192.168.1.33   0b   0b   240.0 b   240.0 b   120 Bytes   120 Bytes   2021-07-02T14:14:15.816Z
LAN   192.168.1.14   0b   0b   208.0 b   208.0 b   104 Bytes   104 Bytes

2

20.7 Legacy Series / Upgrade to 20.7 fails

« on: August 18, 2020, 05:13:35 pm »

I'm trying to upgrade from 20.1.9 to 20.7. After all packages are extracted (installed?) the system hangs at:

Configuring system logging...done

If I press ctrl-c it continues and then stops at:

Starting NTP service...deferred

If I press ctrl-c there it just boots to 20.1.9

I'm running Opnsense as a VM in ESXi

Any Idea how to fix this?

3

General Discussion / Why 3 releases in one day

« on: May 26, 2020, 07:32:08 am »

Tried to find why there was 3 releases on the same day but haven't found any blogg or thread explaining that

So why?

4

19.7 Legacy Series / [SOLVED] Gateway monitor missing after update

« on: July 26, 2019, 11:57:58 am »

I updated to 19.7.1 today an now one of my gateway monitor is missing av does not start
I monitored Cloudflares DNS to check online connectivity

dpinger   Gateway Monitor (Cloudflare)   

5

19.7 Legacy Series / devd errors in log

« on: July 26, 2019, 11:44:59 am »

After update to 19.7.1 I get lots of devd error in my log. Any ideas what's causing this? I'm running om VMWare ESXi if that helps

Jul 26 11:44:06   devd: Popping table
Jul 26 11:44:06   devd: Processing notify event
Jul 26 11:44:06   devd: Pushing table
Jul 26 11:44:06   devd: Processing event '!system=CAM subsystem=periph type=error device=cd0 serial="00000000000000000001" cam_status="0xcc" scsi_status=2 scsi_sense="70 02 3a 00" CDB="00 00 00 00 00 00 " '
Jul 26 11:44:03   devd: Popping table
Jul 26 11:44:03   devd: Processing notify event
Jul 26 11:44:03   devd: Pushing table
Jul 26 11:44:03   devd: Processing event '!system=CAM subsystem=periph type=error device=cd0 serial="00000000000000000001" cam_status="0xcc" scsi_status=2 scsi_sense="70 02 3a 00" CDB="00 00 00 00 00 00 " '

6

19.1 Legacy Series / Upgrade from 19.1.1 to 19.1.3 fails

« on: March 08, 2019, 08:23:56 pm »

I try to upgrade to upgrade from 19.1.1 to 19.1.3, but after upgrade I can no longer ping OPNsense 192.168.1.1.
Interfaces have the same IP's as before the upgrade

Luckily I run Opnsense on VMware ESXi and made a snapshot before the upgrade so I could revert back to 19.1.1.
Tried to run the upgrade again but same problem.

Running OPNsense 19.1.1-amd64 on VMware 6.7 with e1000v v-nics

Any help on how to troubleshot this? And what more info you need from me

7

18.7 Legacy Series / Segmentation fault while installing

« on: January 27, 2019, 04:03:39 pm »

Trying to install on an HP Elitebook 830 G3 but the installer crashes with a Segmentation fault.
I'm now running pfsense on the same hardware without a problem

How can I fix this?