Show Posts
1
18.7 Legacy Series / UDP Broadcast blocked on in-active Interface
« on: August 22, 2018, 08:33:12 pm »
Hi Forum
Background: went from a smoothly running Monowall to Opnsense
. Having following issue though:
3 x VLANs all running on the physical LAN Interface which itself is not active of course.
BUT - it seems that broadcast get block on the LAN Interface itself:
LAN Aug 22 20:27:57 10.77.1.238:50508 255.255.255.255:10001 udp Default deny rule
Bug or Feature?
Goal would be to use 3 vlans for 3 subnets wich different rules and wifi networks, this on a switch port (trunk) which forwards all 3 vlans --> all working allright - just the broadcast.
Should I enable the LAN again within the vlan that the device resides in? Little lost here.
Thanks!
phab
Background: went from a smoothly running Monowall to Opnsense
. Having following issue though: 3 x VLANs all running on the physical LAN Interface which itself is not active of course.
BUT - it seems that broadcast get block on the LAN Interface itself:
LAN Aug 22 20:27:57 10.77.1.238:50508 255.255.255.255:10001 udp Default deny rule
Bug or Feature?
Goal would be to use 3 vlans for 3 subnets wich different rules and wifi networks, this on a switch port (trunk) which forwards all 3 vlans --> all working allright - just the broadcast.
Should I enable the LAN again within the vlan that the device resides in? Little lost here.
Thanks!
phab