Topics

1

23.7 Legacy Series / pkg: No packages available to install matching 'os-dyndns' have been found

« on: August 13, 2023, 06:17:50 pm »

Hello Everyone,

How to remove osd-dyndns (missing) under the plugin tab?

On my system it shows:
os-dyndns (missing) Version = N/A - Size = N/A - Tier = N/A - Repository = N/A - Comment = N/A

I contantly get the error message:
pkg: No packages available to install matching 'os-dyndns' have been found in the repositories

I tried to remove from the console shell, said package is missing.

2

Zenarmor (Sensei) / Can we get the 'Top Destination Locations Heatmap' as a widget?

« on: November 27, 2022, 09:22:19 pm »

Hello,

Very nice product. Tons of info, has helped me deal with trackers on Windows.

Can we get the 'Top Destination Locations Heatmap' as a widget for the 'Lobby' page in OPNsense?

Also, I noticed when viewing Zenarmor:Reports there is a 'Report Setting' to the right just off the screen. First I thought it was my theme, so I switch back to default theme, and it shows the same thing. I can drag the page left or use my mouse side scroll wheel, and see this menu. There is an 'x' to close this menu, but it reappears every time I open Zenarmor. Can this be fixed? Can it be relocated somewhere else? A click button at the top, maybe? Gear icon?

Other items that need addressing are the widgets on Zenarmor Dashboard page. These boxes are cutting off the bottom line when not scrolling down. Meaning the default view. I realize they are scrollable, but need to be lengthened another line, so it's not cutoff at first glance.

They are:
Table of Apps
Table of Local Assets
Table of Remote Hosts

Again great product,

James

3

22.7 Legacy Series / Firewall not letting Internal Wi-Fi pass

« on: November 26, 2022, 09:21:03 am »

Hello Everyone,
I installed a mini PCIe half size M.2 Wi-Fi module card in my router. Added the wireless device ath0_wlan1 and added the interface under assignments. So far, so good.

Entered all the IP addresses and placed it in Access Point mode. Setup DHCPv4 and saved. Created a firewall rule just like my LAN and WLAN. Can see the Wi-Fi card and connect with my mobile device, but no Internet.

DNS settings okay. Rule works on other interfaces. I have checked the firewall rule over and over. It should work, but it is not letting any packets in or out.

In the live log, all lines are red due to being blocked. (Default deny / state violation rule)

I checked the NAT and can see the Wi-Fi Networks in the automatic rules section just like the LAN Networks, and WLAN Networks. The LAN and WLAN work with the same rule, just different interface name.

It's like the firewall rule is not being applied.

Is there something else I'm missing here? Is it because it is an internal Wi-Fi card? I have an external USB wireless dongle that can be placed in AP mode also, and it will work with the exactly same rule as all the other interfaces.

Any suggestions would be greatly appreciated.

4

Virtual private networks / Multiple Client VPN's need an interface for each?

« on: November 04, 2022, 12:17:04 am »

Hi Everyone,

I wanted to add multiple NordVPN clients. When I added six of them, I noticed my WAN gateway would become 'defunct' even with those recently added clients disabled. I could only get my connection back after removing them and leaving only one. How does one go about having multiple clients, and be able to choose the one I need to use?

Do I need to add an interface, gateway, and firewall rules for each one? If I enabled two of them, or put them in a VPN group, would that create a problem and run both at the same time?

Is there a guide somewhere on how to set up multiple VPN clients?

Any help or direction would greatly be appreciated,

James

5

Zenarmor (Sensei) / Zenamour not respecting default gateway to contact bc.googleusercontent.com:5355

« on: October 07, 2022, 05:22:51 pm »

Hello,

I have a question about why Zenamour is using my WAN interface to contact Google user content servers when my default gateway is on a VPN? When I disable Cloud Threat it stops logging those connections on port :5355, but as one would guess I need it enable to get up-to-date info. That's okay, but why bypass my VPN to do that?

I'm I wrong here? Can someone help me understand why or how is this package is able to do that?
Use my ISP WAN connection, instead of my VPN?

James

6

Hardware and Performance / Intel Centrino Wireless-N 2230 Model 2230BNHMW

« on: February 01, 2022, 12:36:39 am »

Hello Everyone,

Has anyone gotten an Intel Centrino Wireless-N 2230 Model 2230BNHMW working? It has a SoftAP feature.

I cannot select AP mode. The only thing it shows is Infrastructure BSS mode. I'm current'y using the iwn0 driver.

Are there commands I can run to help sort out the problem with this little mini-PCI express card? Are there any other mini-pci express cards that will work with FreeBSD and OPNsense?

I have a USB Zyxel AC240 that works, but craps out when pushed by Sun Valley Sensei. It just drops the connection after awhile. When I unselect Sensei for that interface the USB dongle stays connected.

Thanks in advance for any time spent helping to troubleshoot this,

James

7

20.7 Legacy Series / OpenVPN will not start on 20.7.2-amd64

« on: March 16, 2021, 01:27:18 am »

Hello everyone. Can someone give me pointers on figuring out why OpenVPN and OpenSSH will not start?

When I select VPN:OpenVPN:Clients and press the start icon I get a green icon. But when I return to the dashboard The red stop button is there as if it's running.

When I go to Connection Status under OpenVPN it's there also. I have rebooted, shut the system totally down and the same behavior.

I tried to log in through the shell and found OpenSSH was not running. What would cause these services to not start?

What can I do to reinstall these apps, or what ever is preventing them from starting?

Any guidance would be greatly appreciated,

James

8

General Discussion / Cannot upgrade pkg 1.15.6

« on: December 17, 2020, 11:29:34 pm »

Hello can someone point me to a solution to fix an upgrade issue. I get this error while trying to do a mandatory upgrade.

Installed packages to be UPGRADED:
   pkg: 1.15.6 -> 1.15.10_1

Number of packages to be upgraded: 1
[1/1] Upgrading pkg from 1.15.6 to 1.15.10_1...
Child process pid=17194 terminated abnormally: Segmentation fault
A firmware update is currently in progress.

*** OPNsense.localdomain.local: OPNsense 20.7.2 (amd64/OpenSSL) ***

9

20.7 Legacy Series / Upgrade from 20.1.9_1 to 20.7 failed - no sig file found

« on: August 02, 2020, 07:58:59 am »

Can someone help me with a failed system update. Now it's stuck and won't upgrade. No connectivity for clients but can ping from shell.

When I try and update from the OPNsense web client I get a response of:
Firmware status check was aborted internally. Please try again.

***GOT REQUEST TO UPGRADE***
Fetching packages-20.7-OpenSSL-amd64.tar: .. failed, no signature found
***DONE***

When I use option 12 to update from console it states nothing found. I entered the 20.7 major update response at at prompt but it can not find the sig file?

What can I do to save this system, any help would greatly be appreciated.

James

10

19.7 Legacy Series / Sunnyvalley Sensei Shows in Main Menu - MongoDB not Shown in Services Window

« on: December 12, 2019, 04:46:45 am »

Quick question, title saids it all

Are there plans to move Sensei under Services of the main menu on the left like all other services, i.e. Ntopng, Redis, ClamAV, and others?

Also, shouldn't there be a listing for MongoDB in the Services window on the right of the Dashboard?
Currently the only way to determine whether the database is running, or need to be restarted is to go inside the Sensei web app. Suricata, Monit, and others are listed giving a quick view they are running.

11

19.7 Legacy Series / Cannot assign an IP configuration type to a tunnel interface

« on: August 03, 2019, 02:54:23 am »

Hi,

I have a question on setting the tunnel interface opt1

When trying to select DCHP I get:

The following input errors were detected:
      Cannot assign an IP configuration type to a tunnel interface.

Was there a change from 19.1 to 19.7?

It will not save unless I choose 'None' in the IPv4 Configuration Type field.

Can anyone suggest where I start looking?

All was working until I upgraded, Now I have to disable everything in the VPN and Firewall to get out on the internet

Thanks for any time spent on this issue

12

19.1 Legacy Series / NordVPN updated their OPNsense VPN setup guide to 19.1

« on: June 29, 2019, 06:10:20 am »

After many attempts to setup NordVPN as a client I called tech support and pointed out there are errors in that guide. I received an email stating they had updated the guide.

You can find it here:

https://support.nordvpn.com/Connectivity/Router/1292598142/OPNsense-18-7-setup-with-NordVPN.htm

Notice the link still states 18.7 and I noticed a couple errors still remain. But others were fixed.

13

19.1 Legacy Series / Arpwatch type package?

« on: June 17, 2019, 06:05:00 am »

Is there an 'arpwatch' type package that will email admin?

I found the os-arp-scan but one must run it manually.

Thanks for any guidance,

James

14

Intrusion Detection and Prevention / How do I reset Intrusion Detection to install state?

« on: February 12, 2019, 11:34:29 pm »

Hello All,

How can I reset Suricata? I need to get back to the state it was at after install.

15

18.7 Legacy Series / Insight Aggregator will not start

« on: January 27, 2019, 03:29:54 am »

Hello All,

I have a situation pertaining to Insight Aggregator will sometimes start then quit. Most of the time it will not start. This started happening a day ago.

Can someone give me some pointers on best course of action. I reset The RRD and clear all logs from the shell and that didn't work.

Here is a log from System/General

flowd_aggregate.py: flowd aggregate died with message Traceback (most recent call last): File "/usr/local/opnsense/scripts/netflow/flowd_aggregate.py", line 151, in run aggregate_flowd(do_vacuum) File "/usr/local/opnsense/scripts/netflow/flowd_aggregate.py", line 86, in aggregate_flowd stream_agg_object.cleanup(do_vacuum) File "/usr/local/opnsense/scripts/netflow/lib/aggregate.py", line 278, in cleanup self._update_cur.execute('delete from timeserie where mtime < :expire', {'expire': expire_timestamp}) DatabaseError: database disk image is malformed

Thanks for any help or time spent on this issue,

James