Topics

1

22.1 Legacy Series / Custom Cron Job

« on: June 02, 2022, 09:19:47 pm »

I have been trying to setup a custom cron job. Googled and found several forum posts about action.d. So I created a file and restarted the service but nothing showing up in cron.

action.d file and service restart

Code: [Select]

root@dmz01:/usr/local/opnsense/service/conf/actions.d # more actions_sbt.conf
[uploadacmecertificates]
command:/usr/local/bin/removed
parameters:-s removed
type:script
message:Upload Acme Certificates
root@dmz01:/usr/local/opnsense/service/conf/actions.d # service configd restart
Stopping configd...done
Starting configd.
root@dmz01:/usr/local/opnsense/service/conf/actions.d #

When I goto System->Settings->Cron and try and add a new job I can't find it in the list?

2

18.7 Legacy Series / Can't ping opnsense from workstation on LAN

« on: December 24, 2018, 08:17:33 pm »

5 Interface setup with 2 WAN.

I can ping 3 of the 5 opnsense interface IP's. (from workstation)
I can ping both WAN gateways. (from workstation)

Windows 10 workstation is getting 10.2.2.102 IP from opnsense DHCP and I can access the webinterface on the router at 10.2.2.1. But I can't ping IP.

I have a allow everything rule on all interfaces.


Firewall ->Log Files ->Live View does not show any of my ping's?

3

18.7 Legacy Series / New Install - APU - No States and other issues

« on: December 12, 2018, 03:25:39 am »

I setup a fresh install on an APU and configured 5 networks, 2 WAN and 3 LAN.

Primary WAN is Fiber and WAN2 is Comcast in DHCP.
2 LANs are public IP blocks assigned to me and the 3rd LAN is a private IP space 10.2.2.0/24.

I have several servers and my WISP router (PFSense) configured and passing traffic thru the opnsense APU over the fiber. private 10.2.2.0/24 is setup to send traffic over the Comcast internet and failover to the fiber. nothing connected to the 10.2.2.0/24 network will pass traffic to the internet, can't ping 8.8.8.8 but can ping public and private router interfaces.

When I goto look at the state table I see nothing (see picture) I feel like some of the other diagnostic tools are missing info too and I also noticed the the outbound NAT was in hybrid mode and the automatic rules are gone.

I have been using PFSense for years and I'm pretty sure I setup thing right but am missing something or my config has broken opnsense.

4

18.1 Legacy Series / APU Install - 18.1

« on: March 06, 2018, 12:38:02 am »

I have been using APU's with PFSense and I have an extra that I was going to try opnsense with for the first time.

I downloaded the 18.1 nano image and write it to an SD card. First boot works, change a few settings and reboot and it won't boot. I have tried all the solutions I could find in the forums. Is there something I need to change during the first boot to keep it booting after initial boot.

The forum threads I read from late 2017 seamed to imply a fix was integrated into version 18.