Topics

1

19.7 Legacy Series / GEOIP stopt working

« on: January 02, 2020, 06:47:24 am »

Hi there,

GEOIP Service stopt working on Dec 30 / 2019. Obviously  maxmind is no more providing the geolite database via
geolite.maxmind.com/download/geoip/database/*

Any hints / solutions to get this fuction working again ?

Best regards
Michael

2

17.7 Legacy Series / multiple dhcp6c (multi wan) problem

« on: November 06, 2017, 07:53:11 am »

I've got two wan connections
- pppoe0 - DTAG VDSL
- em0_vlan51 - Vodafone Cable
both with fix ipv4-adress and fix ipv6 /56 subnet. Both providers need dhcp to hand out an ipv6 ip to the opnsense/router. I'm able to set up wan1 (DTAG) OR wan2 (Vodafone) and it works trouble-free.
When i'm trying to set up wan1 AND wan2 the opnsense will start two dhcp6c processes - both bindung to *:546 and the problems start.

# sockstat|grep dhcp6c
root     dhcp6c     55384 3  dgram  -> /var/run/logpriv
root     dhcp6c     55384 7  udp6   *:546                 *:*
root     dhcp6c     85812 3  dgram  -> /var/run/logpriv
root     dhcp6c     85812 7  udp6   *:546                 *:*

# ps ax|grep dhcp6c
55384  -  Is      0:00.16 /usr/local/sbin/dhcp6c -d -c /var/etc/dhcp6c_opt5.conf -p /var/run/dhcp6c_pppoe0.pid pppoe0
85812  -  Is      0:00.12 /usr/local/sbin/dhcp6c -d -c /var/etc/dhcp6c_opt13.conf -p /var/run/dhcp6c_em0_vlan51.pid em0_vlan51

if one dhcp6c process will start renewing adress, the other one will get the answer
/var/log/dhcpd.log:
Nov  6 07:48:18 OPNsense dhcp6c[55384]: Sending Solicit
Nov  6 07:48:18 OPNsense dhcp6c[85812]: unexpected interface (26)

so only one ipv6 connection will be ok - ipv4 works without trouble.

Is there a way to bind the dhcp6c client to an interface or merge the config files so only one dhcp6c is used?

Michael

3

17.7 Legacy Series / WAN DHCP lease on startup wrong?

« on: October 25, 2017, 07:00:49 am »

Hi,

i'm using opnsense the last years without any issue, but now i've got a problem i can't handle.

I've got an pppoe as WAN (Telekom VDSL - working flawless for years) and just want to add an second WAN connection for failover (Vodafone cable) which uses DHCP. Everything is working, but if i reboot the opnsense while the Vodafone dhcp-server is not reachable (modem offline), the WAN2 interface get's 0.0.0.0 as IP and so  its not possible to set the default route for opnsense -> no traffic from LAN to WAN.
In "Interfaces / Overview" i can see, dhcp for WAN2 is marked "UP" - if i "renew" dhcp lease on WAN2 it is marked "down", the 0.0.0.0 on WAN2 is gone and i can setup an default route via pppoe.

It seems to be a problem with dhcp lease on startup - any idea? Am i doing something wrong?

opnsense 17.7.6

wfr
Michael