Topics

1

22.1 Legacy Series / VPN issue / Lan not reachable without static route

« on: April 13, 2022, 08:54:33 pm »

Hello,

I configured VPN server on opnsense , LAN network :192.168.2.0/24  , VPN network: 10.10.0.0/24 .
VPN clients connect successfully to the server and i can surf the internet via the tunnel with gateway redirection.
However , i have an issue with routing in regards to reaching the LAN network .  firewall rules are attached .

i can see in the firewall live view the following when i try to reach the following box:192.168.2.100
   lan      2022-04-13T21:44:49   10.10.0.6:51945   192.168.2.100:80   tcp   let out anything from firewall host itself    (direction out)

if i add a static route on my box that to reach 10.10.x.x is via 192.168.2.1  , the problem will be fixed.  however, obviously i have some misconfiguration somewhere.
Appreciate your help ,

2

22.1 Legacy Series / Opnsense connectivity /switch power issue

« on: March 11, 2022, 06:42:07 am »

Hello,
I am facing a strange issue and i need some help.
I have a laptop where opnsense is installed on it.  This laptop has 2 adapters  , default ethernet port of laptop connected to WAN  and  an eth usb adapter connected to LAN . a cable goes from the usb adapter to a L2 switch connected to my other devices.  The issue im facing , is when i lose electricity power on the switch (then after power up) , i lose internet and connectivity,  and the problem cannot be resolved till i restart opnsense . Any idea why this is happening and how to solve it?
Elie 

3

18.7 Legacy Series / netflow not working on 18.7.1

« on: August 25, 2018, 08:34:34 am »

Hello,
I updated recently from 18.1 to 18.7.1 , however i noticed that i am not able to configure netflow parameters anymore with chrome browser.
There is no options displayed to choose the LAN and WAN interface,version and destinations from,while using chrome browser. However , these options are available when using internet explorer.
Can you please help?

Elie

4

17.7 Legacy Series / [SOLVED] Low download speed

« on: August 04, 2017, 05:57:42 pm »

Hello,

Opnsense firewall is installed on physical machine(dell e6400) , i am  connected to WAN  thru a modem (bridge mode).My ISP download speed is 10Mb/s , upload 1Mb/s (this can be verified on the modem , also i tested it with using different router ). But when i use Opnsense, i can see that the download speed is roughly 3mb/s , and upload speed is 1mb/s .
I saw other users having the same issue, and recommended disabling hardware checksum offload , but this didnt help. Also i tried to use UE0 and UE1 for LAN and WAN interfaces, but the speed remains the same. The problem seems to be in Opnsense ,i am using version 17.7
It seems Strange that most users reporting problem on download speed , have the same Download limit problem 2-3Mb/s.Could it be a bug?
Please advice,

Br
Elie