Topics

1

17.1 Legacy Series / Big trouble with Captive Portal

« on: August 15, 2017, 12:41:13 am »

Hi

In a few of opnsense installations, after a hard reset or power failure, authentication on Captive Portal does not work anymore (even if I maintain Captive Portal enabled, but with no authentication). If you check the user and password directly at the GUI it works.

In System-> Log I found this messages:
With authentication enabled (Local database and vouchers):

configd.py: [fce26331-e5a4-474b-9d94-d24b594f9f7a] Script action failed with Command '/usr/local/opnsense/scripts/OPNsense/CaptivePortal/allow.py /zoneid "0" /username "anonymous@172.16.200.152" /ip_address "172.16.200.152" /authenticated_via "" /output_type "json"' returned non-zero exit status 1 at Traceback (most recent call last): File "/usr/local/opnsense/service/modules/processhandler.py", line 477, in execute stdout=output_stream, stderr=error_stream) File "/usr/local/lib/python2.7/subprocess.py", line 541, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '/usr/local/opnsense/scripts/OPNsense/CaptivePortal/allow.py /zoneid "0" /username "anonymous@172.16.200.152" /ip_address "172.16.200.152" /authenticated_via "" /output_type "json"' returned non-zero exit status 1

Without authentication:

configd.py: [2970966c-ce01-4e04-b2e2-88e40ef606d3] Script action failed with Command '/usr/local/opnsense/scripts/OPNsense/CaptivePortal/allow.py /zoneid "0" /username "anonymous@172.16.10.146" /ip_address "172.16.10.146" /authenticated_via "" /output_type "json"' returned non-zero exit status 1 at Traceback (most recent call last): File "/usr/local/opnsense/service/modules/processhandler.py", line 477, in execute stdout=output_stream, stderr=error_stream) File "/usr/local/lib/python2.7/subprocess.py", line 541, in check_call raise CalledProcessError(retcode, cmd) CalledProcessError: Command '/usr/local/opnsense/scripts/OPNsense/CaptivePortal/allow.py /zoneid "0" /username "anonymous@172.16.10.146" /ip_address "172.16.10.146" /authenticated_via "" /output_type "json"' returned non-zero exit status 1

I tried to delete and re create the Captive Portal, install the last update of opnsense, restart the FW, check disk in mono user mode, but at the moment, only a full reinstall solves the problem.

Can you help me?

Thanks for your time

Josua

2

General Discussion / Software for issue vouchers (useful for hotels,...)

« on: April 18, 2017, 06:22:42 pm »

Hi!

I'm Josua from Netbynet, I programmed a software for import and issue vouchers generated as CSV in opnsense.

If you want to install and try you can find it here:

http://www.netbynet.net/nbnwifi/

This software is free with no limitations, no ad's, etc...

Consider a donation if it's useful for you.