Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - angel2040

Pages: [1]

22.7 Legacy Series / init: not found in path /sbin/init:/sbin/oinit:/sbin/init.bak.....

« on: October 13, 2022, 07:05:14 pm »

Hey all. Don't know if this is the correct place to post this?
I'm trying to install 22.7 vga off usb on this hardware:

AMD Ryzen R7 3700U/R5 3500U Windows 11 Mini PC USB3.1 2*DDR4 Slot 8GB/16GB 128GB/256GB/512GB SSD 2*1000M LAN Computer
https://www.aliexpress.us/item/3256804226152260.html?spm=a2g0o.order_detail.0.0.fd81f19c7JY4at&gatewayAdapt=glo2usa&_randl_shipto=US

This is on uefi bios. It keeps hitting the same error and stack trace. Tried legacy also with no luck. The img I burned to USB looks good:

openssl dgst -sha256 -verify OPNsense-22.7.pub -signature /tmp/image.sig OPNsense-22.7-OpenSSL-vga-amd64.img.bz2

Verified OK

Anyone see this? What can I try?

Thanks

-A

18.7 Legacy Series / 8.7.2 -> 8.7.4: /usr/lib/libmagic.a: Lzma library error: Corrupted input data

« on: October 23, 2018, 05:19:50 pm »

So it seems I can no longer upgrade via the gui. I always have to remote login and do it by hand. Anyone know how I can fix this recurring error?

Fetching base-18.7.4-amd64.obsolete: ... done
Fetching base-18.7.4-amd64.txz: .................... done
Fetching kernel-18.7.4-amd64.txz: ............ done
!!!!!!!!!!!! ATTENTION !!!!!!!!!!!!!!!
! A critical upgrade is in progress. !
! Please do not turn off the system. !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Installing kernel-18.7.4-amd64.txz... done
Installing base-18.7.4-amd64.txz..../usr/lib/libmagic.a: Lzma library error: Corrupted input data
tar: Error exit delayed from previous errors.
failed

18.1 Legacy Series / Upgrading from 8.1.8 -> 8.1.13 failing....

« on: July 25, 2018, 01:42:20 am »

I was running this update from console menu. And it produced this error:

[51/55] Upgrading opnsense from 18.1.8 to 18.1.13...
[51/55] Extracting opnsense-18.1.13: .........pkg-static:
Fail to extract /usr/local/www/wizard.php from package: Lzma library error: Corrupted input data
[51/55] Extracting opnsense-18.1.13... done
A firmware update is currently in progress.

18.1 Legacy Series / 18.1 update fails....

« on: January 29, 2018, 11:09:12 pm »

I had updated to 17.7 2-3 hours ago (with reboot). Just tried updating to 18.1 and got this:

***GOT REQUEST TO UPGRADE: maj***
Fetching packages-18.1-OpenSSL-amd64.tar: .................................. done
Fetching base-18.1-amd64.obsolete: ... done
Fetching base-18.1-amd64.txz: .................... done
Fetching kernel-18.1-amd64.txz: ............ done
!!!!!!!!!!!! ATTENTION !!!!!!!!!!!!!!!
! A critical upgrade is in progress. !
! Please do not turn off the system. !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Extracting packages-18.1-OpenSSL-amd64.tar... done
Extracting base-18.1-amd64.txz... done
Extracting base-18.1-amd64.obsolete... done
Installing kernel-18.1-amd64.txz..../boot/kernel/krpc.ko: Lzma library error: Corrupted input data
tar: Error exit delayed from previous errors.
failed
***DONE***

17.1 Legacy Series / Slow Internet behind Spectrum/Charter/TWC 300 mpbs connection

« on: July 25, 2017, 03:58:19 am »

Starting new topic on this as I did not want to hijack "slow internet connection". So

I have one of these:

Mini PC J1900 Quad core CPU, 4 LAN (Intel) with 8 gigs of ram and 500 gig ssd.
4 x Intel I211AT 10/100/1000 Controller

ibg0 is my WAN interface.

root@ FW:~ # pciconf -B -l | egrep igb0
igb0@pci0:1:0:0: class=0x020000 card=0x00008086 chip=0x15398086 rev=0x03 hdr=0x00

root@ FW:~ # dmesg | egrep igb0
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe000-0xe01f mem 0xd0900000-0xd091ffff,0xd0920000-0xd0923fff irq 16 at device 0.0 on pci1
igb0: Using MSIX interrupts with 3 vectors
igb0: Ethernet address: 00:0e:c4:ce:da:87
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
igb0: permanently promiscuous mode enabled
igb0: link state changed to UP
igb0: link state changed to DOWN
igb0: link state changed to UP
igb0: link state changed to DOWN
igb0: link state changed to UP
ifa_maintain_loopback_route: deletion failed for interface igb0: 3
ifa_maintain_loopback_route: insertion failed for interface igb0: 17
igb0: link state changed to DOWN
igb0: link state changed to UP

The cpu doesn't get over 10% and only using 14% of the 8 gigs.

So I just switched from uverse (75mps) to spectrum because you know, who doesn't want 300mps internet for $20 more per month.

If shutdown both spectrum ARIS modem (TM1602) and the 17.1.10 opnsense FW, turn it back on, the very first speed test is 300mps down, 20 mps up. Any subsequent tests after that I get 100mps down, 20 mps up?? I've checked the MTUs (with a laptop directly attached to the ARIS) and it's 1500. Note, no errors or drops.

root@ FW:~ # ./speedTest
Name Mtu Network Address Ipkts Ierrs Idrop Ibytes Opkts Oerrs Obytes Coll Drop
igb0 1500 <Link#1> 00:0e:c4:ce:da:87 5793428 0 0 8302223793 1816291 0 558912816 0 0
igb0 - fe80::%igb0/6 fe80::20e:c4ff:fe 0 - - 0 16 - 916 - -
igb0 - 66.215.208.0/ 66-215-214-225.dh 340638 - - 427209195 63 - 3984 - -
Retrieving speedtest.net configuration...
Testing from Spectrum (66.215.214.225)...
Retrieving speedtest.net server list...
Selecting best server based on ping...
Hosted by Ultimate Internet Access (Ontario, CA) [21.91 km]: 25.683 ms
Testing download speed................................................................................
Download: 75.60 Mbit/s
Testing upload speed................................................................................................
Upload: 20.87 Mbit/s
Name Mtu Network Address Ipkts Ierrs Idrop Ibytes Opkts Oerrs Obytes Coll Drop
igb0 1500 <Link#1> 00:0e:c4:ce:da:87 5883463 0 0 8423019739 1913060 0 590716650 0 0
igb0 - fe80::%igb0/6 fe80::20e:c4ff:fe 0 - - 0 16 - 916 - -
igb0 - 66.215.208.0/ 66-215-214-225.dh 430687 - - 545606637 63 - 3984 - -

I just bought an ARRIS SB6190 and TPC-LINK TC-7620 (marked down at Target) from the spectrum list of supported cable modems. Called Spectrum tried SB6190, tested with direct connecting laptop, getting 300 mpbs down. Insert my 17.1.10 opnsense FW (rebooted fresh). getting 300 mps down, retesting gives me 80-100 mps download. Swapped it out for TP-7620, direct connected laptop is 300 mp down. But when I insert opnsense FW, I cannot get an IP via DHCP. Had to install SB6190 back in.

BTW, spectrum bridges the connection to opnsense because it's an routable IP. The laptop is running windows, but I think I;m going to boot a live linux off the opnsense FW to see if it does thew same thing with linux. Anyone know if there's a liveCD for FreeBSD 11.1?

Pages: [1]