1
16.1 Legacy Series / No console menu with serial connection
« on: March 07, 2016, 11:56:52 pm »
Since upgrading from OPNsense 15 to 16 I fail to see the serial console menu. My terminal emulator shows all console messages when booting until this entry:
WAN (pppoe0) -> v4/PPPoE: (my WAN IP)
LAN (re2) -> v4: (my local IP)
but nothing more from this point on.
My settings in System - Admin Access - Serial communications:
Serial Terminal: "Enables the first serial port with 115200/8/N/1 by default ..." checked
Serial Speed: 115200
Primary Console: Serial Console
Console Menu: "Password protect the console menu" not checked
I'm using currently OPNsense 16.1.5_1 on a PC Engines APU Board.
WAN (pppoe0) -> v4/PPPoE: (my WAN IP)
LAN (re2) -> v4: (my local IP)
but nothing more from this point on.
My settings in System - Admin Access - Serial communications:
Serial Terminal: "Enables the first serial port with 115200/8/N/1 by default ..." checked
Serial Speed: 115200
Primary Console: Serial Console
Console Menu: "Password protect the console menu" not checked
I'm using currently OPNsense 16.1.5_1 on a PC Engines APU Board.