1
16.1 Legacy Series / [SOLVED] Wireless AP
« on: February 23, 2016, 10:12:43 am »
Hello!
I´m doing some testings with opnsense as replacement for an old router.
I know that it´s not recommended to use a wireless card as an AP on Bsd, but we had the hardware available and wanted to try it.
Wan Dhcp ---> OPNsense ---> Lan 192.168.1.1 ---> Dhcp
|
|
|--------> OPNsense as Wireless AP 192.168.4.1 --> Dhcp
The problem is that i can´t get the wireless clients to access the internet.
The Wifi card is a Ralink RT5390 using the ral-driver. Posting status below:
Regards Hypoc
I´m doing some testings with opnsense as replacement for an old router.
I know that it´s not recommended to use a wireless card as an AP on Bsd, but we had the hardware available and wanted to try it.
Wan Dhcp ---> OPNsense ---> Lan 192.168.1.1 ---> Dhcp
|
|
|--------> OPNsense as Wireless AP 192.168.4.1 --> Dhcp
The problem is that i can´t get the wireless clients to access the internet.
The Wifi card is a Ralink RT5390 using the ral-driver. Posting status below:
Regards Hypoc
Code: [Select]
ral0_wlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether e4:d5:3d:5c:34:5e
inet6 fe80::e6d5:3dff:fe5c:345e%ral0_wlan1 prefixlen 64 scopeid 0x8
inet 192.168.4.1 netmask 0xffffff00 broadcast 192.168.4.255
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
status: running
ssid AP channel 7 (2442 MHz 11g) bssid e4:d5:3d:5c:34:5e
regdomain ETSI country SE indoor authmode WPA2/802.11i privacy MIXED
deftxkey 3 AES-CCM 2:128-bit AES-CCM 3:128-bit txpower 30 scanvalid 60
pureg protmode OFF -apbridge dtimperiod 1 -dfs