Topics

1

17.1 Legacy Series / Problem with NAT

« on: June 02, 2017, 11:57:05 am »

Hello everyone, we had to do NAT but why nothing works. I made a rule, I registered ports, but why does not it work. I use Internet connection type VLAN (OPT1). It seems that everything is set up correctly but does not work, can that tell?

2

16.7 Legacy Series / Problem with NAT

« on: November 01, 2016, 09:51:24 am »

Hello. Faced with the problem of port forwarding. I use vlan OPT1 interface(it is no IP address), and real IP on Wan. I tried to make the port forwarding rule to the internal network, but it does not work. I read this topic https://forum.opnsense.org/index.php?topic=1874.0  but I did not. Please, help....

3

General Discussion / [SOLVED] Lightsquid

« on: December 02, 2015, 12:39:42 pm »

Hey, when to wait for lightsquid or sarg. without them as it is inconvenient to analyze logs proxy

4

General Discussion / Problem with proxy

« on: November 05, 2015, 06:53:40 am »

Hello, there is a problem with the proxy. Up and running proxy to transparent mode, provided that enable traffic management stupidly falls Internet-like as is (pings go, online services work-Skype) and the sites are not loaded. Does anyone have any ideas about this?
P.S. Put a limit on the rate of only one customer that not to issue more than 1.5 meters per customer

5

Russian - Русский / Проблемы с проксей

« on: November 05, 2015, 06:52:09 am »

Всем привет, есть проблемы с проксей. Настроена и работает прокся к прозрачном режиме, если при этом активировать traffic management то тупо падает инет-вроде как есть(пинги идут, онлайн сервисы работают-Skype) а сайты не грузятся. Есть у кого нибудь  идеи по этому поводу?
P.S. Ставлю только ограничение на скорость 1 клиента т.е. не выдавать больше 1,5 метров на клиента