1
General Discussion / Re: Adblocker - Need Help
« on: August 29, 2022, 07:43:39 pm »
How do I know if my DNS requests are using DoT when using this implementation? Do I still set DoT on opnsense' end as well or just in AdGuard?
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Documentation and Translation / Re: AdGuard Home setup guide
« on: August 29, 2022, 07:43:28 pm »
How do I know if my DNS requests are using DoT when using this implementation? Do I still set DoT on opnsense' end as well or just in AdGuard?
3
General Discussion / Re: Adblocker - Need Help
« on: August 24, 2022, 10:15:07 pm »
I followed this guide: https://samuelsson.dev/install-adguard-home-on-an-opnsense-router/
How can I ensure that my DNS queries are encrypted using the set up?
How can I ensure that my DNS queries are encrypted using the set up?
4
General Discussion / Re: DNSBL failing - An error occurred during script execution. Check the logs for de
« on: August 24, 2022, 02:59:59 pm »
I don't have DNSSEC or DNS64 enabled. I am leaning towards the long execute time as well as it seems as though it's adding the lists. What's odd, when I try to remove the lists, it errors out and the sites are still blocked. It leaves me a little apprehensive of the effectiveness of this.
Appreciate the insight so far.
Appreciate the insight so far.
5
General Discussion / Re: DNSBL failing - An error occurred during script execution. Check the logs for de
« on: August 24, 2022, 05:40:29 am »
Just an update, I have not yet tried the plugin suggestion. That will be next.
I'm on a clean install, I can view the plugins folder.
I am now trying to add the dnsbl and get the attached error. This is what I see in the log:
Edit: It seems to be certain lists, I was able to apply the SimpleAdList. Stephen Black list is a no go
I retried the Stephen block list and it errors, but the logs show:
I'm on a clean install, I can view the plugins folder.
I am now trying to add the dnsbl and get the attached error. This is what I see in the log:
| 2022-08-23T23:27:45-04:00 | Notice | unbound | blocklist download : exclude domains matching .*localhost$|^(?![a-zA-Z_\d]).* |
I retried the Stephen block list and it errors, but the logs show:
| 2022-08-23T23:38:40-04:00 | Notice | unbound | blocklist download https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts (lines: 142982 exclude: 15 block: 135870) |
6
Documentation and Translation / Re: AdGuard Home setup guide
« on: August 24, 2022, 05:37:30 am »
Delete
7
General Discussion / Re: Adblocker - Need Help
« on: August 24, 2022, 05:31:49 am »
Do you know why this isn't an "official" plugin in the repository?
8
Hardware and Performance / Re: Inter-VLAN speeds on DEC695 & DEC750
« on: August 23, 2022, 04:33:21 pm »
Looking at the 750 or the dc2750 (not sure I'm willing to speed the extra $100+ on the 1U unit as nice as it would be in the rack), they have 3 RJ45, I would use 0 for the WAN and 1 for say the primary VLAN and possibly 2 for Guest. Would that mean that I would be using an extra port on my switch to tag it for that VLAN?
Port 24 on switch would go to Port 2 on the 750 and be tagged with VLAN 2,3,4 and Port 23 on switch would go to Port 3 on the 750 and be tagged in 5? Is that how it works? The switch does support LAGG as well but that is beyond my understanding at this point.
Port 24 on switch would go to Port 2 on the 750 and be tagged with VLAN 2,3,4 and Port 23 on switch would go to Port 3 on the 750 and be tagged in 5? Is that how it works? The switch does support LAGG as well but that is beyond my understanding at this point.
9
Hardware and Performance / Re: Inter-VLAN speeds on DEC695 & DEC750
« on: August 23, 2022, 02:43:14 pm »
I appreciate the insight. I do have some knowledge of intermediate networking but am somewhat new to VLANing.
I was planning on having the 4 or 5 VLANs on one port on the appliance. Is there an alternative?
I was planning on having the 4 or 5 VLANs on one port on the appliance. Is there an alternative?
10
General Discussion / Adblocker - Need Help
« on: August 23, 2022, 02:35:19 pm »
Hi everyone, I am coming from a closed source router and pihole system. I've been looking at pfsense/pfblockerng and opnsense.
I need to have DNS over TLS and adblocking. I want to be able to ditch the pihole if possible and run everything from the router.
What are your suggestions? Is there a plugin for adguard or some ad blocking service?
I need to have DNS over TLS and adblocking. I want to be able to ditch the pihole if possible and run everything from the router.
What are your suggestions? Is there a plugin for adguard or some ad blocking service?
11
General Discussion / Re: DNSBL failing - An error occurred during script execution. Check the logs for de
« on: August 23, 2022, 02:28:28 pm »
I assume since that was an unbound list it was suitable but will try your suggestion later. I too don't see errors but it is coming up with that message I posted. The other odd things is I can't check for updates and or plugins page. I even ran a factory reset.
12
Hardware and Performance / Re: Inter-VLAN speeds on DEC695 & DEC750
« on: August 23, 2022, 02:26:42 pm »
Hi, no 10Gb here. Thank you for the help.
13
General Discussion / DNSBL failing - An error occurred during script execution. Check the logs for de
« on: August 23, 2022, 06:04:43 am »
Any BL that I try to apply, I get the following:
Error updating blocklistsAn error occurred during script execution. Check the logs for details
When I go to the logs:See attachment
It SEEMS as though ads are being blocked but can't 100% tell.
I've also tried adding https://unbound.oisd.nl/nsfw/ to the " URLs of Blocklists" field to block that content which does not work. Of note, get the same error when trying to save and apply.
Error updating blocklistsAn error occurred during script execution. Check the logs for details
When I go to the logs:See attachment
It SEEMS as though ads are being blocked but can't 100% tell.
I've also tried adding https://unbound.oisd.nl/nsfw/ to the " URLs of Blocklists" field to block that content which does not work. Of note, get the same error when trying to save and apply.
14
General Discussion / Re: DNSBL Whitelist help
« on: August 22, 2022, 05:17:08 pm »I recommend PiHole.I use it but want to ditch it. I am trying to reduce the amount of devices that I have running.
15
Hardware and Performance / Inter-VLAN speeds on DEC695 & DEC750
« on: August 22, 2022, 04:50:24 pm »
I'm looking at either one of these models and am wondering what the inter-vlan routing speeds are?
Pages: [1] 2