Messages

1

23.7 Production Series / Low Upload Speed

« on: August 18, 2023, 10:37:27 pm »

So, this is a weird situation.

I have a virtualized OpnSense under Proxmox. In fact they are two acting as HA. Last week I had a hardware failure on the main OpnSense and had to change the hardware. I returned the backuped VM on the new HW and it appeared to be fine.

When I checked the upload speed it is not going beyond 40 mbps, it should be 150 mbps. The download speed is fine at 350mbps. It showed me that the speed of the virtual NIC seems to be ok.

I entered in Temp Maintenance mode and the secondary OpnSense can upload up to 150 mbps. So, there is no problem at the ISP side.

I don't know what is going on. How can I solve this problem ?

2

23.7 Production Series / Re: Error after upgrade - PHP Startup: Unable to load dynamic library 'mongodb.so

« on: July 31, 2023, 04:26:57 pm »

I got it working after removing mongodb. I guess it was something Zenarmor left behind after I uninstalled it.

3

23.7 Production Series / Error after upgrade - PHP Startup: Unable to load dynamic library 'mongodb.so

« on: July 31, 2023, 03:48:54 pm »

After upgrading I'm seeing crash report with the message below

[31-Jul-2023 13:43:51 UTC] PHP Warning:  PHP Startup: Unable to load dynamic library 'mongodb.so' (tried: /usr/local/lib/php/20220829/mongodb.so (Cannot open "/usr/local/lib/php/20220829/mongodb.so"), /usr/local/lib/php/20220829/mongodb.so.so (Cannot open "/usr/local/lib/php/20220829/mongodb.so.so")) in Unknown on line 0

The system seems ok. But even after submiting the report and clearing it, it keeps happening...

Any ideas ?

4

High availability / Re: The backup firewall is not accessible or not configured, but I can ping both

« on: August 22, 2022, 07:36:01 pm »

I saw your other post and realized that I had the same issue. Once I allowed the SYNC interface everything was ok

5

High availability / Re: The backup firewall is not accessible or not configured, but I can ping both

« on: August 21, 2022, 06:18:16 pm »

Adding more information.

I changed the IP address from both SYNC interfaces. Then when I tried to change the IP address of the slave on the High Availability Settings page it doesn't stick. I push save it refreshes and the old IP comes back. I can change the synchronize interface and it does stick. I tried with 3 different browsers to make sure it's not the cache with the same results.

I also tried to clean the field and leave it blank but the old IP comes back.

On the slave FW everything works as it should. I was able to change and save the configuration.

I reseted to the defaults and restore the config but the issue remained

6

High availability / [SOLVED] The backup firewall is not accessible or not configured

« on: August 19, 2022, 08:12:46 pm »

Hi all

I have a HA setup working for more than an year. Today I realized that the HA Status is giving this message "The backup firewall is not accessible or not configured." It was not like that before.

I can ping each FW from each other using the SYNC interface. There is a direct cable between the two FW.

I rebooted both FW and the issue still happens. Not sure what else can I do.

7

22.7 Legacy Series / Opnsense won't automatically reboot after upgrade

« on: August 18, 2022, 02:19:14 pm »

Hi,

For some versions now my main Opnsense won't reboot itself after the upgrade/update, even when it's needed.

The installation happens normally I just have to manually do it later. It's not a major issue, but I just got curious about the reason.

8

22.7 Legacy Series / Re: Unbound Restarting every 2 hours after upgrade to 22.7

« on: July 31, 2022, 06:32:19 pm »

Yes, it does coincide.

I was able to fixed it by assigning a fix IP4 for my WAN interface. I assume it won't be possible for all user cases.

Cheers

9

22.7 Legacy Series / Re: Unbound Restarting every 2 hours after upgrade to 22.7

« on: July 30, 2022, 02:08:21 pm »

Yeah, this is not how it was working before. I upgraded to 22.7_4 and the behaviour is the same. Apparently there is something wrong with the current implementation.

10

22.7 Legacy Series / Unbound Restarting every 2 hours after upgrade to 22.7

« on: July 29, 2022, 10:01:52 pm »

Hi

I have seen at Unbound log that it has restarted itself 3 times since 9am today exactly every 2 hours.

I didn't see any other information on the log that could explain it. Any one else having this issue ?

11

Zenarmor (Sensei) / Re: 22.1.10 Sensei Phalcon error?

« on: July 07, 2022, 04:50:36 pm »

+1 same error

12

Zenarmor (Sensei) / HA error API

« on: May 19, 2022, 11:47:07 am »

Hi

When I try to enter the HA option at configuration it fails with the following msg

An API exception occured
/usr/local/opnsense/mvc/app/controllers/OPNsense/Base/ApiControllerBase.php:159: Error at /usr/local/opnsense/mvc/app/controllers/OPNsense/Sensei/Api/HaconfigController.php:103 - Trying to access array offset on value of type null

I’m running engine 1.11.2 and Opnsense 22.1.7_1

Any sugestions ?

13

21.7 Legacy Series / Interfaces Question

« on: November 18, 2021, 07:25:21 pm »

Sorry if this is a silly question

I've been using OpnSense on Proxmox for a while. Today I upgraded my Proxmox to the latest version of it (7.1-5).

I saw interfaces name changes at the some Ubuntu machines and had to make some changes here and there.

At OpnSense at Interfaces Overview I'm seeing this. I don't recall seeing those unassigned interfaces with status Up but Administratively disabled. Is there something wrong ? If yes, how can I fix it ?

This is the image of what I see

14

21.7 Legacy Series / Re: Unbound issues

« on: September 15, 2021, 03:02:56 am »

Hi

Just my 2 cents here. I had some sites not resolving and it turned out to be Strict QNAME minimisation checked. Once I unchecked it all is good.

15

21.7 Legacy Series / Re: IPv6 Configuration

« on: September 13, 2021, 05:57:51 pm »

Wow, the discussion has been very rich so far.

I think I'm still lost at this moment. Is there anything I can/should do ? Or the only solution is to ask for more than /64 for my ISP ?

Thanks