Messages

1

22.1 Legacy Series / Re: Problem with wifi NIC after 22.1 update

« on: February 08, 2022, 10:19:25 am »

This is the only error that I can see when I try to reload the interface (Interfaces -> Overview):

/usr/local/etc/rc.configure_interface: The command '/sbin/dhclient -c '/var/etc/dhclient_opt2.conf' -p '/var/run/dhclient.run0_wlan1.pid' 'run0_wlan1'' returned exit code '1', the output was 'run0_wlan1: no link .............. giving up'

Is there something else that I can try?

Riccardo

2

22.1 Legacy Series / Problem with wifi NIC after 22.1 update

« on: February 07, 2022, 07:39:15 am »

After 22.1 update I have a problem with a WiFi interface that I use as a WAN backup. It cannot connect and obtain the IP via dhcp if the SSID is hidden. I used to have the SID hidden for a long time without a problem. Is there something I’m missing?

3

21.1 Legacy Series / Problem with Openvpn and insight data

« on: July 09, 2021, 10:44:49 am »

I recently configured and openvpn server on my Opnsense. Everything works good but it seems that everytime a client connects to my ovpn server my insight datas are messed up. The graphs and datas from 24 hour average are not visible anymore and somethimes the other graphs puts ovpn nic datas in WAN datas so datas are completely wrong. Is there a way to filter out the ovpn connection completely from flowd?

Riccardo

4

21.1 Legacy Series / Re: Problem with reverse lookup after 21.1.7 update

« on: June 20, 2021, 09:13:24 am »

Problem seems to be solved after update to 21.1.7_1.

5

21.1 Legacy Series / Problem with reverse lookup after 21.1.7 update

« on: June 19, 2021, 11:04:03 pm »

After update to 21.1.7 the reverse lookup on my opnsense box is not working anymore (I’m using unbound on the box). I didn’t changed anything. Any suggestion on what can I check?

Riccardo

6

General Discussion / Re: Could not find the repository on the selected mirror

« on: February 09, 2021, 08:04:06 pm »

You're right Franco. I checked again and I found that that problem was related to the ntopng repository I installed. I removed it and installed again and now everything is working.

Thanks a lot.

Riccardo

7

General Discussion / Re: Could not find the repository on the selected mirror

« on: February 09, 2021, 07:46:34 pm »

I have exactly the same problem and the same versions:

pkg   1.15.10_2
pkgconf   1.7.3,1

The problem started, as far as I can tell, after the update to 21.1.1.

8

20.7 Legacy Series / Re: Call for testing: official netmap kernel

« on: October 27, 2020, 07:33:23 pm »

Hi mb,

top -SP is not showing anything strange, no single CPU is at 100%. I tried testing the speed to the internet.

9

20.7 Legacy Series / Re: Call for testing: official netmap kernel

« on: October 27, 2020, 01:18:28 pm »

Hi @mb. The hardware is 2 CPUs x Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz with 8GB RAM. I don't think the problem may be related to hw performance because with Sensei active the Cpu is around 5% and never goes over 60%. I tried with vmx with the same result.

10

20.7 Legacy Series / Re: Call for testing: official netmap kernel

« on: October 26, 2020, 03:13:38 pm »

I updated to 20.7.4, which includes the modified netmap, but I still have the bandwidth problem. If I enable Sensei my connection drops from 850Mb to about 420Mb. I'm using em driver on Vmware 6.7.

11

Zenarmor (Sensei) / Re: Sensei on OPNsense - Application based filtering

« on: August 07, 2020, 04:22:56 pm »

In the thread you mentioned seems they found a way to solve the problem. How can I configure sensei correctly on LAN nic after I patch the kernel?

12

Zenarmor (Sensei) / Re: Sensei on OPNsense - Application based filtering

« on: August 06, 2020, 06:13:49 pm »

I'm trying to install Sensei on a new virtualized (vmware) installation of OPNsense, but during the setup the lan interface (vmx0) is not displayed in available interfaces. I don't have anything installed that can lock that interface.
Any help?

13

20.1 Legacy Series / Problem with USB WLAN nic

« on: July 30, 2020, 11:49:06 am »

I used an USB WLAN nic without problems for months. Today I had to delete the assignments for this to do some cleanup after I subscribed for a new FTTH connection. After this the device is not visible anymore in Interfaces: Wireless: Devices. The device is  still correctly discovered by the system as run0 but it seems that the run0_wlan device is not created anymore. I tried to reboot several times without success. Any help?

Riccardo

14

Zenarmor (Sensei) / Re: Sensei on OPNsense - Application based filtering

« on: July 07, 2020, 01:59:40 pm »

After the latest update I cannot see sessions in reports blocks anymore so I cannot add exception for single destinations.
Any suggestion?

15

Zenarmor (Sensei) / Eastpect crashes and destroy LAN network

« on: May 07, 2020, 02:14:10 pm »

Starting from 20.1.4 I have a problem with eastpect that crashes and destroy my LAN NIC. After some minutes it restarts and work for sometime. The problem happens every now and then and I cannot see any relation with other components.

This is the log file:

May  7 11:48:57 OPNsense kernel: pid 33892 (eastpect), uid 0: exited on signal 11
May  7 11:48:57 OPNsense kernel: 937.846498 [ 293] generic_netmap_unregister Emulated adapter for re0 deactivated
May  7 11:48:57 OPNsense kernel: 937.847457 [1033] generic_netmap_dtor       Emulated netmap adapter for re0 destroyed
May  7 11:49:12 OPNsense eastpect[23514]: nm0::re0: permanently promiscuous mode enabled
May  7 11:49:12 OPNsense kernel: 952.519254 [1127] generic_netmap_attach     Emulated adapter for re0 created (prev was 0)
May  7 11:49:12 OPNsense kernel: 952.519307 [1033] generic_netmap_dtor       Emulated netmap adapter for re0 destroyed
May  7 11:49:12 OPNsense kernel: 952.544306 [1127] generic_netmap_attach     Emulated adapter for re0 created (prev was 0)
May  7 11:49:12 OPNsense kernel: 952.544634 [ 318] generic_netmap_register   Emulated adapter for re0 activated
May  7 11:49:12 OPNsense eastpect[23514]: nm1::re0^: permanently promiscuous mode enabled
May  7 11:51:12 OPNsense kernel: pid 23514 (eastpect), uid 0: exited on signal 11
May  7 11:51:12 OPNsense kernel: [HBSD SEGVGUARD] [eastpect (23514)] Suspension expired.
May  7 11:51:12 OPNsense kernel: -> pid: 23514 ppid: 60854 p_pax: 0xa50<SEGVGUARD,ASLR,NOSHLIBRANDOM,NODISALLOWMAP32BIT>
May  7 11:51:12 OPNsense kernel: 072.172948 [ 293] generic_netmap_unregister Emulated adapter for re0 deactivated
May  7 11:51:12 OPNsense kernel: 072.174418 [1033] generic_netmap_dtor       Emulated netmap adapter for re0 destroyed
May  7 11:51:26 OPNsense eastpect[15502]: nm0::re0: permanently promiscuous mode enabled
May  7 11:51:26 OPNsense kernel: 086.361862 [1127] generic_netmap_attach     Emulated adapter for re0 created (prev was 0)
May  7 11:51:26 OPNsense kernel: 086.361912 [1033] generic_netmap_dtor       Emulated netmap adapter for re0 destroyed
May  7 11:51:26 OPNsense kernel: 086.379070 [1127] generic_netmap_attach     Emulated adapter for re0 created (prev was 0)
May  7 11:51:26 OPNsense kernel: 086.379521 [ 318] generic_netmap_register   Emulated adapter for re0 activated
May  7 11:51:26 OPNsense eastpect[15502]: nm1::re0^: permanently promiscuous mode enabled