Messages

1

Tutorials and FAQs / Re: HOWTO - DNS Security / Unbound DNS with DNSCrypt, DoH Plugin for IPv4 + IPv6

« on: February 02, 2019, 09:33:40 pm »

Hi,

After reading all configuration guides for dnscrypt-proxy plugin and several testing I wasn't able to make it work with unbound, only with dnsmaq and dnscrypt-proxy instance running on 127.0.0.2:53 and 127.0.0.2 as the only dns server on System-> settings; but with this configuration I found a problem because on boot dnsmasq is started before dnscrypt-proxy so system can't resove domains. Creating an script to start dnscrypt-proxy before dnsmasq at boot time finally solved it.
I hope this info may be useful to others.

Regards.

2

18.7 Legacy Series / Re: New Plugin Dnscrypt-Proxy

« on: February 02, 2019, 09:31:44 pm »

Hi,

After reading all configuration guides for dnscrypt-proxy plugin and several testing I wasn't able to make it work with unbound, only with dnsmaq and dnscrypt-proxy instance running on 127.0.0.2:53 and 127.0.0.2 as the only dns server on System-> settings; but with this configuration I found a problem because on boot dnsmasq is started before dnscrypt-proxy so system can't resove domains. Creating an script to start dnscrypt-proxy before dnsmasq at boot time finally solved it.
I hope this info may be useful to others.

Regards.

3

18.7 Legacy Series / Re: MultiWAN default route error

« on: November 21, 2018, 11:41:52 pm »

Issue is better described here:

https://github.com/opnsense/core/issues/2186

Regards.

4

18.7 Legacy Series / Re: MultiWAN default route error

« on: November 21, 2018, 01:56:27 am »

Hi,

On multiWAN scenarios (in my case a PPPoE and a DHCP) default route is automatically configured on the wrong WAN interface so package updates and navigation fail; there are several messages in the forum reporting similar issues.

Regards.

5

18.7 Legacy Series / MultiWAN default route error

« on: November 20, 2018, 01:53:07 am »

Hi,

Any update on MultiWAN default route not being set properly? I've read is a known bug.

Regards.

6

18.7 Legacy Series / Re: First time install problem: Booting from USB stick hangs

« on: November 03, 2018, 12:42:34 am »

Hi,

I run across the same problem installing OPNsense on an old device; it seems USB booting has some bugs in current OPNsense images.

The only way I was able to perform installation was using first a FreeBSD Release Mini-Memstick image and later
installing OPNsense using opnsense-bootstrap method:

https://forum.opnsense.org/index.php?topic=4526.0

https://github.com/opnsense/update/blob/master/README.md

Hope this is usefull and saves time to others.

Regards.