Messages

1

24.7 Production Series / Re: Weird flickering with Traffic Graph on dashboard - Firefox/Linux - 24.7_5

« on: November 22, 2024, 01:07:00 pm »

Transacting multiple Firefox upgrades since OP, I have not observed the problem lately
[ i7-13700 | Gentoo Linux | www-client/firefox-132.0.2:rapid ]

2

24.7 Production Series / Re: Multi-WAN failover not bringing link back up properly

« on: November 18, 2024, 06:31:29 pm »

Perhaps, you might consider looking into
https://forum.opnsense.org/index.php?topic=44049.msg219587
   -->   https://github.com/opnsense/core/issues/8064:
"[ BE 23.10 ... BE 24.10_7-amd64 ] Automatic fail-over to a Fallback Gateway still fails"

3

24.7 Production Series / Re: WebGUI unaccessible for 3-4 minutes --> when modyfing "Interfaces"

« on: November 18, 2024, 12:26:16 pm »

Does the issue happen if IPv6 Configuration Type is set to "None"?

Please, also note https://github.com/opnsense/core/issues/8064#issuecomment-2482676644 .

4

24.7 Production Series / Re: WebGUI unaccessible for 3-4 minutes --> when modyfing "Interfaces"

« on: November 18, 2024, 10:40:00 am »

As one former guy confirmed - even in actual Business Edition [BE 24.10_7-amd64] when using bare metal installation.

Processor: Intel Haswell I3-4360T
Memory: 32 GiB
Network:
. Intel I218-V
. Intel I350-T2 v2
. Intel I350-T4 v2
https://github.com/opnsense/core/issues/8064

5

24.7 Production Series / Re: WebGUI unaccessible for 3-4 minutes --> when modyfing "Interfaces"

« on: November 16, 2024, 08:37:41 pm »

Strange:
During this time, access to other websites works as expected - not being blocked

6

24.7 Production Series / Re: WebGUI unaccessible for 3-4 minutes --> when modyfing "Interfaces"

« on: November 16, 2024, 05:26:26 pm »

Confirmation: Similar under [ BE 24.10_7-amd64 ] .

Example:

-> Interface -> select LAN interface -> enable IPv6 :
. . . "IPv6 Configuration Type" = "Track Interface"
. . . "Assign prefix ID" = 0x11

-> Save -> Apply

-> WEB GUI unresponsible for 3'..4'
-> WEB GUI becomes responsible by itself afterwards; no need to reboot et al.

7

24.7 Production Series / Dynamic IPv6 : Automatic fail-over to a Fallback Gateway fails

« on: November 16, 2024, 04:41:12 pm »

Please, c.f. detailed description in #8064 :
"[ BE 23.10 ... BE 24.10_7-amd64 ] Automatic fail-over to a Fallback Gateway still fails"
[ https://github.com/opnsense/core/issues/8064 ]

OPNsense 24.10 business edition is based on the OPNsense 24.7.6 community version.

Has anybody out there a similar ISP connection and tried automatic fail-over?

Thanks in advance

8

24.7 Production Series / Re: Weird flickering with Traffic Graph on dashboard - Firefox/Linux - 24.7_5

« on: November 15, 2024, 12:56:33 pm »

Persists on Business Edition OPNsense 24.10_7-amd64.

Discrepancies might be related to:
- Firefox: based upon Quantum
- Vivaldi,
- Falkon: based upon Chromium

9

General Discussion / Re: Set fixed scale on Traffic and other Graphs?

« on: November 15, 2024, 12:40:19 pm »

+1

10

24.7 Production Series / Re: Weird flickering with Traffic Graph on dashboard - Firefox/Linux - 24.7_5

« on: September 03, 2024, 04:17:51 pm »

Perhaps this might yield a HINT:

The traffic graph works fine in www-client/vivaldi-6.8.3381.57:0 .

Reverse, Vivaldi is not able to show the entries in

. . . Services: Intrusion Detection: Log File

which works flawlessly in  www-client/firefox-130.0:rapid .

11

Hardware and Performance / OPNsense 23.10.2-amd64 [BE] : iwm blocks iwlwifi1

« on: February 22, 2024, 03:49:07 pm »

# opnsense-patch a02b07a908

Franco, looking into
. . . https://github.com/opnsense/core/commit/a02b07a908
I got the impression that the patch cited above should have arrived in 23.7.12
which you named as base for BE 23.10.2.

Nevertheless, iwm takes precedence; only with
. . . devmatch_blocklist="if_iwm" in /etc/rc.conf.local
I can select a parent interface "iwlwifi0" instead of "iwm0"
in Interfaces:Wireless:Devices.

Can you be so kind to clarify?
Thanks in advance!
Kind regards
Manfred

12

Intrusion Detection and Prevention / Re: Snort Rules will not install on Suricata

« on: May 22, 2022, 04:05:27 pm »

Services: Intrusion Detection: Administration --> Download

. . . TOP: "Enable selected"

. . . BOTTOM: "Save"  &&  "Download & Update Rules"

I had to get used to clicking all of them in the correct sequence ...

H.t.h.

13

22.1 Legacy Series / Re: GeoIP Error - with Update_tables

« on: April 19, 2022, 07:21:07 pm »

CONFIRMATION:

Creating a single Firewall Alias "GeoIP__Deutschland" and "Apply"
changed "Last updated" to "2022-04-19T14:27:40" .

14

22.1 Legacy Series / Re: GeoIP Error - with Update_tables

« on: April 17, 2022, 05:33:30 pm »

Running     Version    22.1.6

Still:   "Last updated   2022-03-29T12:39:12"


Download:    GeoLite2-Country-CSV_20220412
All dates:     12. Apr 13:10

"GeoIP settings" -> "Apply":     no change

15

22.1 Legacy Series / HW Monitoring exploiting Nuvoton NCT 6791D

« on: April 02, 2022, 04:50:59 pm »

Completely switching away from all hitherto existing IPFire installations, I'm absolutely convinced how quick well organized structures and excellent documentation eased all transformations.
Nevertheless, I'm a "newbie" in OPNsense and not as familiar with FreeBSD as with Linux and GNU userland, so I ask for indulgence.

The "Thermal Sensors" widget splendidly displays information about the CPU:
   --> Lobby: Dashboard;
   --> System: Settings: Miscellaneous

Linux Kernel support:
$ grep -i "NCT6791D" /usr/src/linux/drivers/hwmon/nct*.c   --->    .../nct6775.c

lm-sensors monitors not only temperatures,
but - more important - also voltages and fan speeds,
enabling quite complete remote control & alert.
Further on, sensor readings of additional plug-in cards are made available.

Searching for an analogon for FreeBSD -> OPNsense,
I was prepared that my mileage might vary.

OPNsense 22.1.4_1 repository provides sysutils/smartmontools-7.3 (-> disks),
but not bsdhwmon which is documented as part of FreeBSD 13.0-RELEASE.

𝚟𝚎𝚛𝚖𝚊𝚍𝚎𝚗's "sensors.sh" script  --->   UPDATE 1
[ https://vermaden.wordpress.com/2022/02/15/sensors-information-on-freebsd/ ]
is similarly limited to cpu+acpi+disk.

I would be grateful  for any helpful hint.
Thanks a lot in advance,
and best regards.